Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Parametric Study for Hole Machining in Natural Fiber Composites

천연섬유 복합재료의 홀 가공을 위한 파라메트릭 연구

  • Lee, Dong-Woo (Department of Mechanical Engineering, Changwon National University) ;
  • Oh, Jung-Suck (Management Support Division, Hanwha Techwin) ;
  • Song, Jung-Il (Department of Mechanical Engineering, Changwon National University)
  • Received : 2016.11.16
  • Accepted : 2017.02.25
  • Published : 2017.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, natural fiber composites including flax fiber reinforcement was manufactured. It was tried to find optimum design of drill and machining factor for minimizing the damage during hole machining in natural fiber composites. Taguchi optimization was used for minimizing the number of experiments and evaluation of the effect of machining factor during hole machining in natural fiber composites. The experimental results indicate that the newly designed drill distributes cutting resistance well and minimizes surface roughness and produces fine surfaces. Developed new drill has been dispersed in the cutting resistance during processing, it was possible to obtain the smooth hole surface. Also, it was found that optimal rotational speed and feed rate of drill for hole machining.

본 연구에서는 천연섬유 복합재료의 홀 가공 인자를 최적화 하기 위하여, 진공 인퓨전 성형공정을 이용하여 천연섬유 복합재료를 제조하였으며 보강재로는 아마섬유를 사용하였다. 그 후 가공에 적합한 드릴을 설계하고, 선정된 가공조건에 따라 홀 가공을 수행하였다. 실험횟수를 최소화하기 위하여 다구찌 실험계획법을 사용하였으며, 홀 가공 후 가공면내 거칠기를 측정하고 거칠기비 분석을 통하여 그 결과를 비교하였다. 실험결과 천연섬유 복합재료의 가공 시 절삭저항을 분산할 수 있는 새로운 드릴을 설계하였다. 이 드릴을 사용할 경우 가공중의 절삭저항이 분산되었으며, 표면거칠기가 최소화된 천연섬유 복합재료를 얻을 수 있었다. 또한 홀 가공에 적합한 최적의 드릴 회전속도 및 이송속도를 선정하였다.

Keywords

References

  1. Bridges, R.R., "A Quantitative Study of Some Factors Affecting the Abrasiveness of Particle Board," Forest Prod. J., Vol. 11, 1971, pp. 39-41.
  2. Porankiewicz, B., "Variation in Composition of Micro-grain Cemented Carbide and Its Impact on Cutting Edge Wear During Particleboard Machining," in: Proc. 13th IWMS, Vancouver, pp. 791-799, (1997).
  3. Porankiewicz, B., and Gro€nlund, A., "Tool Wear-influencing Factors," in: Proc. 10th IWMS, UC, 1991, pp. 220-229.
  4. Gurunathan, T., Mohanty, S., and Nayak, S.K., "A Review of the Recent Developments in Biocomposites Based on Natural Fibres and Their Application Perspectives," Compos. Part A., Vol. 77, 2015, pp. 1-25.
  5. Ramesh, M., Palanikumar, K., and Hemachandra Reddy, K., "Influence of Tool Materials on Thrust Force and Delamination in Drilling Sisal-Glass Fiber Reinforced Polymer (S-GFRP) Composites," Procedia Materials Science, Vol. 5, 2014, pp. 1915-1921. https://doi.org/10.1016/j.mspro.2014.07.513
  6. Lingyu Sun, Ronald F. Gibson, Faramarz Gordaninejad, Jonghwan Suhr, "Energy Absorption Capability of Nanocomposites: A Review," Composite Science and Technology, vol. 69, 2009, pp. 2392-2409. https://doi.org/10.1016/j.compscitech.2009.06.020
  7. Deshmanea, C., Yuana, Q., and Misra, R.D.K., "High Strength-toughness Combination of Melt Intercalated Nanoclay-reinforced Thermoplastic Olefins," Materials Science and Engineering, Vol. 460, 2007, pp. 277-287.
  8. Deshmanea, C., Yuana, Q., Perkins, R.S., and Misra, R.D.K., "On Striking Variation in Impact Toughness of Polyethylene-clay and Polypropylene-clay Nanocomposite Systems: The Effect of Clay-polymer Interaction," Materials Science and Engineering, Vol. 458, 2007, pp.150-157. https://doi.org/10.1016/j.msea.2006.12.069
  9. Takechi Furukawa, "Nanoclay," Japan Plastics, Vol. 61, No. 9, pp. 21-23.
  10. Terese E. Glodek, Steven E. Boyd, Ian M. McAninch, John J. LaScala, "Properties and Performance of Fire Resistant Ecocomposites Using Polyhedral Oligomeric Silsesquioxane (POSS) Fire Retardants," Composites Science and Technology, Vol. 68, No. 14, 2008, pp. 2994-3001. https://doi.org/10.1016/j.compscitech.2008.06.019
  11. Lee, S.E., Song, Y.H., and Chung, K.S., "Incombustibility of Polypropylene by Metal Addition Flame Retardant," The Korean Society of Safety, Vol. 20, No. 4, 2005, pp. 40-45.
  12. Oh, J.S., "Parametric Study for Hole Drilling in Natural Fiber Composites," Master Dissertation, Changwon National University, Changwon, Korea, 2015.