DOI QR코드

DOI QR Code

Fabrication of Inkjet Printed Strain Gauge Using PEDOT:PSS

PEDOT:PSS기반 잉크젯 프린팅 스트레인 게이지의 제작

  • Kye, Ji Won (Gumi Electronics and Information Technology Research Institute) ;
  • Han, Dong Cheul (Gumi Electronics and Information Technology Research Institute) ;
  • Shin, Han Jae (Gumi Electronics and Information Technology Research Institute) ;
  • Yeom, Se-hyuk (Gumi Electronics and Information Technology Research Institute) ;
  • Lee, Wanghoon (Gumi Electronics and Information Technology Research Institute)
  • Received : 2016.12.30
  • Accepted : 2017.01.26
  • Published : 2017.01.31

Abstract

This paper presents the Inkjet-printed strain gauge using PEDOT:PSS. The strain gauge (width 0.6 mm, length 20 mm, thickness $0.3{\mu}m$) was printed on the PET film using PEDOT:PSS ink. The resistance variation of the fabricated strain gauge was measured by the digital multi-meter with the displacement range of -4 to 10 mm. As the measured result, resistance variation (${\Delta}R/R_0$) has approximately 0.75%, linearity of 99.87%. The fabricated strain gauge is expected to the various applications such as tape type pressure sensor, PMS(pressure mapping sensor), wearable devices.

Keywords

References

  1. M. Jang, M. Y. Lee, J. H. Jung, and J. H. Oh, "Moleculebased high-performance sensors for wearable device applications", polymer Science and Technology, vol. 26, no. 4, pp. 290-298, 2015.
  2. S. H. Eom and S. Lim, "Paper-based pattern switchable antenna using inkjet-printing technology", JEES, pp. 613- 619, 2015.
  3. T. Yun, S. Lee and S. Lim, "Inkjet-printed capacitive touch paper", KICS, vol.40, no. 5, pp. 799-805, 2015. https://doi.org/10.7840/kics.2015.40.5.799
  4. R. K. Kramer, C. Majidi, and R. J. Wood, "Wearable tactile keypad with stretchable artificial skin", 2011 IEEE Int. Conf, Robotics and Automation (ICRA), pp. 1103-1107, May 2011.
  5. D. P. Cotton, I. M. Graz, and S. P. Lacour, "A multifunctional capacitive sensor for stretchable electronic skins", IEEE Sensors J., vol. 9, pp. 2008-2009, Dec. 2009. https://doi.org/10.1109/JSEN.2009.2030709
  6. 김성한, "인쇄 전자의 최신 기술 및 시장 동향", KOSEN Reports, 4, 2009.
  7. Takeo Kawase, et al., "Inkjet printing of polymeric fi- eldeffect transistors and its applications", Japanese Jo- urnal of Applied Physics, vol. 44, pp. 3649, Jun. 2005. https://doi.org/10.1143/JJAP.44.3649
  8. J. W. Kye, D. C. Han, H. J. Shin, H. G. Kim, and W. Lee, "Fabrication of flexible temperature & humidity sensor using inkjet-printing technology", J. Sensor Sci. & Tech., Vol. 24, pp. 119-123, 2015. https://doi.org/10.5369/JSST.2015.24.2.119
  9. M. Muraki, S. Takamatsu, K. Matsumoto, and I. Shimoyama, "Organic semiconductor based strain sensors for input system on flexible oleds", 904 MEMS 2008, Tucson, AZ, USA, January 13-17, 2008.
  10. S. Takamatsu, K. Matsumoto and I. Shimoyama, "Mechanically flexible and expandable display with conductivepolymer- coated nylon fabric", 140 MEMS 2008, Tucson, AZ, USA, January 13-17, 2008.
  11. J. H. Kim, Y. K. Seo, J. W. Han, J. Y. Oh, and Y. H. Kim, "Effect of solvent doping and post-treatment on the characteristics of PEDOT : PSS conducting polymer", Appl. Chem. Eng., vol. 26, pp. 275-279, 2015. https://doi.org/10.14478/ace.2015.1018
  12. W. Xiong, C. Liu and X. Zhang, "Inkjet printing of silver nano particles doped PEDOT:PSS thin film" 2012 IEEE Int. Conf, Electronic Packaging Technology & High Density Packaging, pp. 177-181, 2012.