References
- T. Furuta, S. Kawasakim, M. Hashimoto, T. Otomo, Zircaloy-Clad fuel rod burst behavior under simulated loss-of-coolant condition in pressurized water reactors, J. Nucl. Sci. Technol. 15 (1978) 736-744. https://doi.org/10.1080/18811248.1978.9735581
- Y. Lee, T. McKrell, M.S. Kazimi, Safety of Light Water Reactor Fuel with Silicon Carbide Cladding, MIT Center for Advanced Nuclear Energy Systems, Cambridge, 2013. MIT-ANP-TR-150.
- H.M. Chung, Fuel behavior under loss-of-coolant accident situations, Nucl. Eng. Technol. 37 (2005) 327-362.
- K.A. Terrani, S.J. Zinkle, L.L. Snead, Advanced oxidation-resistant iron-based alloys for LWR fuel cladding, J. Nucl. Mater. 448 (2014) 420-435. https://doi.org/10.1016/j.jnucmat.2013.06.041
- K. Barret, S. Bragg-Sitton, D. Galicki, Advanced LWR Nuclear Fuel Cladding System Development Trade-off Study (INL/EXT-12-27090), Idaho National Laboratory, 2012.
- AREVA Federal Services, LLC, Interim Analysis Report for Enhanced Accident Tolerant Fuels (RPT-3009595-000), AREVA, 2013.
- L. Braase, S. Bragg-Sitton, Advanced Fuels Campaign Cladding & Coatings Meeting Summary, INL/EXT-13-28628, Idaho National Laboratory, 2013.
- Y.H. Koo, J.H. Yang, J.Y. Park, K.S. Kim, H.G. Kim, D.J. Kim, Y.I. Jung, K.W. Song, KAERI's development of LWR accident-tolerant Fuel, Nuscl. Technol. 186 (2014) 295-304. https://doi.org/10.13182/NT13-89
- H.G. Kim, I.H. Kim, Y.I. Jung, D.J. Park, J.Y. Park, Y.H. Koo, High-Temperature Oxidation Behavior of Cr-Coated Zirconium Alloy, Transaction of TopFuel (2013), Charlotte, North Carolina, September 15-19, 2013.
- A.M. Yacout, M. Pellin, M.C. Billone, Development and Testing of Nanolaminate Coatings for Conventional LWR Cladding, Transaction of TopFuel (2013), Charlotte, North Carolina, September 15-19, 2013.
- J.Y. Park, I.H. Kim, Y.I. Jung, H.G. Kim, D.J. Park, B.K. Choi, High temperature steam oxidation of Al3Ti-based alloys for the oxidation-resistant surface layer on Zr fuel claddings, J. Nucl. Mater. 437 (2013) 75-80. https://doi.org/10.1016/j.jnucmat.2013.01.338
- F. Khatkhatay, L. Jiao, J. Jian, W. Zhang, Z. Jia, J. Gan, H. Zhang, X. Zhang, H. Wang, Superior corrosion resistance properties of TiN-based coatings on Zircaloy tubes in supercritical water, J. Nucl. Mater. 451 (2014) 346-351. https://doi.org/10.1016/j.jnucmat.2014.04.010
- S. Lee, C. Park, Y. Lim, H. Kwon, Influences of laser surface alloying with niobium (Nb) on the corrosion resistance of Zircaloy-4, J. Nucl. Mater. 321 (2003) 177-183. https://doi.org/10.1016/S0022-3115(03)00245-9
- Y. Al-Olayyan, G.E. Fuchs, R. Baney, J. Tulenko, The effect of Zircaloy-4 substrate surface condition on the adhesion strength and corrosion of SiC coatings, J. Nucl. Mater. 346 (2005) 109-119. https://doi.org/10.1016/j.jnucmat.2005.05.016
- U. Wiklund, P. Hedenqvist, S. Hogmark, B. Stridh, M. Arbell, Multilayer coatings as corrosion protection of Zircaloy, Surf. Coat. Technol. 86-87 (1996) 530-534. https://doi.org/10.1016/S0257-8972(96)03001-0
- W.G. Luscher, E.R. Gilbert, S.G. Pitman, E.F. Love Jr., Surface modification of Zircaloy-4 substrates with nickel zirconium intermetallics, J. Nucl. Mater. 433 (2013) 514-522. https://doi.org/10.1016/j.jnucmat.2012.05.039
- I. Idarraga-Trujillo, M. Le Flem, J. Brachet, M. Lesaux, D. Hamon, S. Muller, V. Vandenberghe, M. Tupin, E. Papin, E. Monsifrot, A. Billard, F. Schuster, Assessment at CEA of Coated Nuclear Fuel Cladding for LWRs with Increased Margins in LOCA and Beyond LOCA, Transaction of TopFuel (2013), Charlotte, North Carolina, September 15-19, 2013.
- I. Kim, F. Khatkhatay, L. Jiao, G. Swadener, J.I. Cole, J. Gan, H. Wang, TiN-based coatings on fuel cladding tubes for advanced nuclear reactors, J. Nucl. Mater. 429 (2012) 143-148. https://doi.org/10.1016/j.jnucmat.2012.05.001
- Y. Lee, M.S. Kazimi, A structural model for multi-layered ceramic cylinders and its application to silicon carbide cladding of light water reactor fuel, J. Nucl. Mater. 458 (2015) 87-105. https://doi.org/10.1016/j.jnucmat.2014.12.013
- Y. Lee, T.J. McKrell, M.S. Kazimi, Thermal shock fracture of silicon carbide and its application to LWR fuel cladding performance during reflood, Nucl. Eng. Technol. 45 (2013) 811-820. https://doi.org/10.5516/NET.02.2013.528
- Y. Lee, T.J. McKrell, C. Yue, M.S. Kazimi, Safety assessment of SiC cladding oxidation under loss-of-coolant accident conditions in light water reactors, Nucl. Technol. 2 (2013) 210-227.
- Y. Lee, H.S. Kim, H.C. No, Failure probabilities of SiC clad fuel during a LOCA in public acceptable simple SMR (PASS), Nucl. Eng. Des. 292 (2015) 1-16. https://doi.org/10.1016/j.nucengdes.2015.05.023
- D.M. Carpenter, G.E. Kohse, M.S. Kazimi, An Assessment of Silicon Carbide as a Cladding Material for Light Water Reactors, MIT Center for Advanced Nuclear Energy Systems, Cambridge, 2010. MIT-NFC-TR-132.
- J.P. Dobisesky, E.E. Pilat, M.S. Kazimi, Reactor Physics Considerations for Implementing Silicon Carbide Cladding into a PWR Environment, MIT Center for Advanced Nuclear Energy Systems, Cambridge, 2011. MIT-ANPTR-136.
- D.A. Bloore, E.E. Pilat, M.S. Kazimi, Reactor Physics Assessment of Thick Silicon Carbide Clad PWR Fuels (MIT-ANP-TR-148), MIT Center for Advanced Nuclear Energy Systems, Cambridge, 2013.
- J.D. Stempien, D.M. Carpenter, G. Kohse, M.S. Kazimi, Behavior of Triplex Silicon Carbide Fuel Cladding Designs Tested Under Simulated PWR Conditions, MIT Center for Advanced Nuclear Energy Systems, 2011. Cambridge.
- K.A. Terrani, B.A. Pint, M.P. Chad, M.S. Chinthaka, L.L. Snead, Y. Katoh, Silicon carbide oxidation in steam up to 2 MPa, J. Am. Ceram. Soc. 97 (2014) 2331-2352. https://doi.org/10.1111/jace.13094
- B.A. Pint, K.A. Terrani, M.P. Brady, T. Cheng, J.R. Keiser, High temperature oxidation of fuel cladding candidate materials in steam-hydrogen environments, J. Nucl. Mater. 440 (2013) 420-427. https://doi.org/10.1016/j.jnucmat.2013.05.047
- M. Ben-Belgacem, V. Richet, K.A. Terrani, Y. Katoh, L.L. Snead, Thermo-mechanical analysis of LWR SiC/SiC composite cladding, J. Nucl. Mater. 447 (2014) 125-142. https://doi.org/10.1016/j.jnucmat.2014.01.006
- L.L. Snead, T. Nozawa, Y. Katoh, T.-S. Byun, S. Kondo, D.A. Petti, Handbook of SiC properties for fuel performance modeling, J. Nucl. Mater. 371 (2007) 329-377. https://doi.org/10.1016/j.jnucmat.2007.05.016
- L.L. Snead, Issues and Overview of SiC-based Fuel and Clad Technologies in Support of Accident Tolerant Fuel Development, SiC/Accident Tolerant Fuel (ATF) Meeting, NSE Department Seminar, MIT Department of Nuclear Science and Engineering, Cambridge, Massachusetts, US, 2013, May 1.
- L.L. Snead, T. Nozawa, M. Ferraris, Y. Katoh, R. Shinavski, M. Sawan, Silicon carbide composites as fusion power reactor structural materials, J. Nucl. Mater. 417 (2011) 330-339. https://doi.org/10.1016/j.jnucmat.2011.03.005
- Y. Katoh, L.L. Snead, C.H. Henager Jr., T. Nozawa, T. Hinoki, A. Ivekovic, S. Novak, Current status and recent research achievements in SiC/SiC composites, J. Nucl. Mater. 455 (2014) 387-397. https://doi.org/10.1016/j.jnucmat.2014.06.003
- Y. Katoh, L.L. Snead, C.H. Henager Jr., A. Hasegawa, A. Kohyama, B. Riccardi, H. Hegeman, Current status and critical issues for development of SiC composites for fusion applications, J. Nucl. Mater. (2007) 659-671.
- Y. Katoh, L.L. Snead, T. Nozawa, S. Kondo, J.T. Busby, Thermophysical and mechanical properties of near-stoichiometric fiber CVI SiC/SiC composites after neutron irradiation at elevated temperatures, J. Nucl. Mater. 403 (2010) 48-61. https://doi.org/10.1016/j.jnucmat.2010.06.002
- Y. Katoh, T. Nozawa, L.L. Snead, K. Ozawa, T. Hiroyasu, Stability of SiC and its composites at high neutron fluence, J. Nucl. Mater. 417 (2011) 400-405. https://doi.org/10.1016/j.jnucmat.2010.12.088
- Y. Katoh, L.L. Snead, C.M. Parish, T. Hinoki, Observation and possible mechanism of irradiation induced creep in ceramics, J. Nucl. Mater. 434 (2013) 141-151. https://doi.org/10.1016/j.jnucmat.2012.11.035
- G. Newsome, L.L. Snead, T. Hinoki, Y. Katoh, D. Peters, Evaluation of neutron irradiated silicon carbide and silicon carbide composites, J. Nucl. Mater. 371 (2007) 76-89. https://doi.org/10.1016/j.jnucmat.2007.05.007
- Y. Katoh, K. Ozawa, C. Shih, T. Nozawa, R.J. Shinavski, A. Hasegawa, L.L. Snead, Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects, J. Nucl. Mater. 448 (2014) 448-476. https://doi.org/10.1016/j.jnucmat.2013.06.040
- 20 GWd SiC Clad Fuel Pin Examination. Report, ORNL/TM-2014/102, Oakridge National Laboratory (ORNL), 2014.
- K.A. Terrani, Y. Yang, Y.-J. Kim, R. Rebak, H.M. Meyer III, T.J. Gerczak, Hydrothermal corrosion of SiC in LWR coolant environments in the absence of irradiation, J. Nucl. Mater. 465 (2015) 488-498. https://doi.org/10.1016/j.jnucmat.2015.06.019
- X. Hu, K.A. Terrani, B.D. Wirth, L.L. Snead, Hydrogen permeation in FeCrAl alloys for LWR cladding application, J. Nucl. Mater. 461 (2015) 282-291. https://doi.org/10.1016/j.jnucmat.2015.02.040
- Personal correspondence, Center for Advanced Nuclear Energy Systems, Massachusetts Institute of Technology, Cambridge, U.S.A, 2013.
- R.V. Nieuwenhove, K. Daub, H. Nordin, Investigation of the Impact of Coatings on Corrosion and Hydrogen Uptake of Nuclear Components, Presentation slides, NUMAT (Nuclear Materials) Conference, Florida, October, 2014.
- T. Cheng, J.R. Keiser, M.P. Brady, K.A. Terrani, B.A. Pint, Oxidation of fuel cladding candidate materials in steam environments at high temperature and pressure, J. Nucl. Mater. 427 (2012) 396-400. https://doi.org/10.1016/j.jnucmat.2012.05.007
- A.T. Nelson, E.S. Sooby, Y.-J. Kim, B. Cheng, S.A. Maloy, High temperature oxidation of molybdenum in water vapor environments, J. Nucl. Mater. 448 (2014) 441-447. https://doi.org/10.1016/j.jnucmat.2013.10.043
- S. Bragg-Sitton, Development of Advanced Accident-tolerant Fuels for Commercial LWRs, Nuclear News, March 2014, pp. 83-91.
- B. Cheng, J. Deshon, Molybdenum-Based Fuel Cladding for Improved Accident Tolerance, EPRI (Electric Power Research Institute), June 2015.
- J.H. Sung, T.H. Kim, S.S. Kim, Fretting damage of TiN coated zircaloy-4 tube, Wear 250 (2001) 658-664. https://doi.org/10.1016/S0043-1648(01)00674-3
- U. Holzwarth, H. Stamm, Mechanical and thermomechanical properties of commercially pure chromium and chromium alloys, J. Nucl. Mater. 300 (2002) 161-177. https://doi.org/10.1016/S0022-3115(01)00745-0
- O. Tabata, T. Tsuchiya, in: J.G. Korvink, Oliver Paul (Eds.), Chapter 2. Material Properties: Measurement and Data, MEMS a practical guide to design, analysis and applications, William Andrew, Inc, NY, USA, 2006.
- R.O. Ritchie, in: Failure of Silicon: Crack Formation and Propagation, Presentation slides, 13th Workshop on Crystalline Solar Cell Materials and Processes, August 2003. Vail, Colorado.
- K. Petersen, Silicon as a mechanical material, Proceedings of the IEEE 70 (1982) 420-457. https://doi.org/10.1109/PROC.1982.12331
- A. Masolin, P.-O. Bouchard, R. Martini, M. Bernacki, Thermo-mechanical and fracture properties in single-crystal silicon, J. Mater. Sci. 48 (2013) 979-988. https://doi.org/10.1007/s10853-012-6713-7
- Thermal Alloys Engineering, Chemical composition and Properties of FeCrAl Alloys. [Internet]. Available from: http://www.thermalloys.com/index.php/en/alloys/fecralalloys.html.
- KANTHAL. Datasheet for Kanthal A-1 (FeCrAl alloy). [Internet]. Available from: http://kanthal.com/en/products/material-datasheets/strip/kanthal-a-1/.
- The Engineering ToolBox, Young Modulus of Elasticity for Metals and Alloys. [Internet]. Available from: http://www.engineeringtoolbox.com/youngmodulus-d_773.html.
- R. Boyer, G. Welsch, E.W. Collings, Material Properties Handbook: Titanium Alloys, ASM International, OH, USA, 1994.
- B.A. Latella, B.K. Gan, K.E. Davies, D.R. McKenzie, D.G. McCulloch, Titanium nitride/vanadium nitride alloy coatings: mechanical properties and adhesion characteristics, Surf. Coat. Technol. 200 (2006) 3605-3611. https://doi.org/10.1016/j.surfcoat.2004.09.008
- T. Namazu, S. Inoue, H. Takemoto, K. Koterazawa, Mechanical properties of polycrystalline titanium nitride films measured by XRD tensile testing, IEEJ Trans. Sensors Micromachines 125 (2005) 374-379. https://doi.org/10.1541/ieejsmas.125.374
- S.H. Kim, H. Park, K.H. Lee, S.H. Jee, D.-J. Kim, Y.S. Yoon, H.B. Chae, Structure and mechanical properties of titanium nitride thin films grown by reactive pulsed laser deposition, J. Ceram. Process. Res. 10 (2009) 49-53.
- J.W. Hutchinson, Plasticity at the micron scale, Int. J. Solid. Struct. 37 (2000) 225-238. https://doi.org/10.1016/S0020-7683(99)00090-6
- FRAPCON-3.5, A Computer Code for the Calculation of Steady-State, Thermal-Mechanical Behavior of Oxide Fuel Rods for High Burnup (NUREG/CR-7022), Pacific Northwest National Laboratory, Richland, WA, USA, 2014.
- Material Property Correlations, Comparisons between FRAPCON-3.5, FRAPTRAN-1.5, and MATPRO (NUREG/CR-7024), Pacific Northwest National Laboratory, Richland, WA, USA, 2014.
- R.F. Barron, B.R. Barron, Design for Thermal Stresses, John Wiley & Sons, New Jersey, 2012.
- M.F. Ashby, D. Jones, Engineering Materials 1: An Introduction to Properties, Applications and Design, third ed., Elsevier Butterworth-Heinemann, Boston, 2005.
Cited by
- Accident tolerant fuel cladding development: Promise, status, and challenges vol.501, pp.None, 2017, https://doi.org/10.1016/j.jnucmat.2017.12.043
- Early studies on Cr-Coated Zircaloy-4 as enhanced accident tolerant nuclear fuel claddings for light water reactors vol.517, pp.None, 2017, https://doi.org/10.1016/j.jnucmat.2019.02.018
- Cracking of Cr-coated accident-tolerant fuel during normal operation and under power-ramping conditions vol.353, pp.None, 2017, https://doi.org/10.1016/j.nucengdes.2019.110275
- Research and Development of Novel Materials for Accident Tolerant Fuel Cladding of Nuclear Reactors vol.2020, pp.4, 2020, https://doi.org/10.26565/2312-4334-2020-4-10
- Unveiling damage mechanisms of chromium-coated zirconium-based fuel claddings by coupling digital image correlation and acoustic emission vol.774, pp.None, 2020, https://doi.org/10.1016/j.msea.2019.138850
- Recent studies on potential accident-tolerant fuel-cladding systems in light water reactors vol.31, pp.3, 2017, https://doi.org/10.1007/s41365-020-0741-9
- Influence of Laser Energy Density on Interfacial Diffusion Bonding and Surface Density of Chromium Coating by Multi-Arc Ion Plating on Zirconium Alloy vol.10, pp.6, 2017, https://doi.org/10.3390/coatings10060565
- Application and Development Progress of Cr-Based Surface Coating in Nuclear Fuel Elements: II. Current Status and Shortcomings of Performance Studies vol.10, pp.9, 2017, https://doi.org/10.3390/coatings10090835
- Mechanical and chemical properties of PVD and cold spray Cr-coatings on Zircaloy-4 vol.541, pp.None, 2017, https://doi.org/10.1016/j.jnucmat.2020.152420
- Effects of Thermal Aging on the Mechanical Properties of FeCrAl-ODS Alloy Claddings vol.62, pp.8, 2017, https://doi.org/10.2320/matertrans.mt-m2021057
- Silicon carbide coatings on zirconium alloy for light water reactor fuel cladding studies vol.1989, pp.1, 2017, https://doi.org/10.1088/1742-6596/1989/1/012009
- Microstructural complexity and dimensional changes in heavily irradiated zirconium vol.5, pp.11, 2017, https://doi.org/10.1103/physrevmaterials.5.113604
- Sintered Silicon Carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere - Part I: Evaluation of scratch adhesion and tribology properties vol.306, pp.None, 2017, https://doi.org/10.1016/j.matlet.2021.130963
- Thermomechanical analysis of a lead-cooled fast reactor with a fast-running model vol.30, pp.None, 2017, https://doi.org/10.1016/j.csite.2021.101694