DOI QR코드

DOI QR Code

Analysis on Harmonic Loss of IPMSM for the Variable DC-link Voltage through the FEM-Control Coupled Analysis

  • Park, Hyun Soo (Department of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Jeung, Tae Chul (Department of Electrical Engineering, Hanyang University) ;
  • Lee, Jae Kwang (Department of Electrical Engineering, Hanyang University) ;
  • Lee, Byoung Kuk (Department of Electrical and Computer Engineering, Sungkyunkwan University)
  • Received : 2016.07.04
  • Accepted : 2016.08.06
  • Published : 2017.01.02

Abstract

This paper describes the loss analysis based on load conditions of the air conditioning compressor motors using variable dc-link voltage. The losses of PMSM (Permanent Magnet Synchronous Motor) should be analyzed by the PWM (Pulse Width Modulation) output of inverter. The harmonic loss by the PWM cannot consider that using the current source analysis of the inverter. In addition, when the voltage of dc-link is variable with the condition of variable speed and load conditions in motor, the losses of motor are also changeable, however it is hard to analyze those losses by only electromagnetic finite element method (FEM). Therefore, this paper proposes the analysis method considering the carrier frequency of the inverter and the varying state of the dc-link voltage through the FEM-control coupled analysis. Using proposed analysis method, additional core loss and eddy current loss of permanent magnet caused by PWM could be analyzed. Finally, the validity of the proposed analysis method is verified through the comparison the result of coupled analysis with experiment.

Keywords

References

  1. Guangxu Zhou, Jin-Woo Ahn, "A Novel Efficiency Optimization Strategy of IPMSM for Pump Applications", Journal of Electrical Engineering & Technology 4(4), 2009.12, 515-520 https://doi.org/10.5370/JEET.2009.4.4.515
  2. Gyu-Won Cho, Dong-Yeong Kim, Gyu-Tak Kim, "The Iron loss Estimation of IPMSM According to Current Phase Angle", Journal of Electrical Engineering & Technology 8(6), 2013.11, 1345-1351 https://doi.org/10.5370/JEET.2013.8.6.1345
  3. Han-woong Ahn, Sung-chul Go, Ju Lee, "Hybrid Pulse Width Modulation Strategy for Wide Speed Range in IPMSM with Low Cost Drives", Journal of Electrical Engineering & Technology 11(3), 2016.5, 670-674 https://doi.org/10.5370/JEET.2016.11.3.670
  4. Kwangyoung Jeong, Dianhai Zhang, Jaehoon Kwon, Ziyan Ren, Chang-Seop Koh, "Measurement and Comparison of Iron Loss in Bonded- and Embossed- Type Segmented Stator Cores for IPMSM", Journal of Electrical Engineering & Technology 9(6), 2014. 11, 2013-2018 https://doi.org/10.5370/JEET.2014.9.6.2013
  5. L. T. Mthombeni; P. Pillay, "Core losses in motor laminations exposed to high-frequency or nonsinusoidal excitation", IEEE Trans. Magn, Vol. 40, No. 5, pp. 1325-1332, Sep/Oct. 2004.
  6. Tae-Chul Jeong, Won-Ho Kim, Mi-Jung Kim, Ki- Deok Lee, Jae-Jun Lee, Jung-Ho Han, Tae-Hyun Sung, Hee-Jun Kim, Ju Lee, "Current Harmonics Loss Analysis of 150-kW Traction Interior Permanent Magnet Synchronous Motor Through Co-Analysis of d-q Axis Current Control and Finite Element Method", IEEE Trans. Magn, Vol. 49, No. 5, pp. 2343-2346, May. 2013. https://doi.org/10.1109/TMAG.2013.2246552
  7. K. Yamazaki, Y. Fukushima, and M. sato, "Loss analysis of permanent magnet motors with concentrated windings- Variation of magnet eddy current loss due to stator and rotor shapes," IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1334-E1342, Jul./Aug. 2009. https://doi.org/10.1109/TIA.2009.2023393