References
- Chou, S. and Krauss, P., "Imprint lithography with sub10 nm feature size and high throughput," Microe- lectronic Engineering, Vol. 35, pp. 237-240, (1997). https://doi.org/10.1016/S0167-9317(96)00097-4
- Guo, L. J. "Recent progess in nanoimprint technology and its applications," Journal of Physics D: Applied Physics, Vol.37, pp. R123-R142, (2004). https://doi.org/10.1088/0022-3727/37/11/R01
- Hirai, Y., Konish, T., Yoshikawa, T. and Yoshida, S., "Simulation and Experimental Study of Polymer Deformation in Nanoimprint Lithography," J. Vac. Sci. Technol. B, Vol. 22, pp. 3288-3293, (2004). https://doi.org/10.1116/1.1826058
- Kim, N.W., Kim, K.W. and Sin, H.-C., "A Viscoelasitc Finite Element Analysis of Thermal Nanoimprint Lithography Process," Journal of the Microelectronics & Packaging Society, Vol. 14, No. 4, pp. 1-7, (2007).
- Kim, N.W., Kim, K.W. and Sin, H.-C., "Effect of Pressure and Initial Polymer Resist Thickness on Low Temperature Nanoimprint Lithography," Journal of manufacturing engineering & technology, Vol. 18, No. 1, pp. 68-75, (2009).
- Kim, N.W., Kim, K.W. and Sin, H.-C., "Finite element analysis of low temperature thermal nanoimprint lithography using a viscoelastic model," Microelectronic Engineering, Vol. 85, pp. 1858-1865, (2008). https://doi.org/10.1016/j.mee.2008.05.030
- Lee, K.Y. and Kim, K.W., "A Study on the Filling Process and Residual Layer Formation in Nanoimprint Lithography Process," Journal of the Korea Academia-Industrial Cooperation Society, Vol. 13, No. 9, pp. 3835-3840, (2012). https://doi.org/10.5762/KAIS.2012.13.9.3835
- Lee, K.Y. and Kim, K.W., "Numerical Analysis of Pressure and Temperature Effects on Residual Layer Formation in Thermal Nanoimprint Lithography," Journal of the Semiconductor & Display Equipment Technology, Vol. 12, No. 2, pp. 93-98, (2013).
- Hirai, Y., Yoshida, S. and Takagi, N., "Defect Analysis in Thermal Nanoimprint Lithography," J. Vac. Sci. Technol. B, Vol. 21, pp. 2765-2770, (2003). https://doi.org/10.1116/1.1629289
- Worgull, M., Heckele, M., Hetu, J. F., and Kabanemi, K. K., "Modeling and optimization of the hot embossing process for micro and nanocomponent fabrication," J. Microlith. Microfab. Microsyst., Vol. 5, No. 1, pp. 011005/1-13, (2006).
- Song, Z., "Study of Demolding Process in Thermal Imprint Lithography via Numerical Simulation and Experimental Approaches," M.S. Thesis, Louisiana State University, (2007).
- Dirckx, M. E., "Demolding of Hot Embossed Polymer Microstructures," Ph. D. Thesis, MIT, (2010).
- Omar, F., "Hot Embossing Process Parameters: Simulation and Experimental Studies," Ph. D. Thesis, Cardiff University, (2013).