DOI QR코드

DOI QR Code

6시그마를 이용한 자동차 범퍼의 치수 최적화에 대한 연구

A Study on Dimension Optimization of Injection-molded Automotive Bumper by Six Sigma

  • 김주권 (부경대학교 기계공학과) ;
  • 김종선 (한국생산기술연구원 금형기술그룹) ;
  • 이준한 (한국생산기술연구원 금형기술그룹) ;
  • 곽재섭 (부경대학교 기계공학과)
  • Kim, Joo-Kwon (Department of Mechanical Engineering, Pukyong National Univ.) ;
  • Kim, Jong-Sun (Molds and Dies Technology Group, Korea Institute of Industrial Technology) ;
  • Lee, Jun-Han (Molds and Dies Technology Group, Korea Institute of Industrial Technology) ;
  • Kwak, Jae-Seob (Department of Mechanical Engineering, Pukyong National Univ.)
  • 투고 : 2017.09.26
  • 심사 : 2017.11.22
  • 발행 : 2017.12.31

초록

In this study, the optimization of the overall dimensions of an automobile bumper was investigated through CAE and experiment using the Six Sigma method and design of experiment (DOE) method, respectively. Injection pressure, injection speed, injection time, cooling time, holding time, injection temperature, and holding pressure were selected as the vital parameters affecting the overall width of product through analysis of trivial many using CAE. The optimal values were determined using the DOE method, and we analyzed the improvement by applying the optimal conditions to the production process. As a result, the mean value of the overall width was close to the target value, with a deviation of 0.05mm, and the processability and I-MR control were remarkably improved. Finally, the dimension pass rate of the product improved by 20%.

키워드

참고문헌

  1. Okatem, T., Erzurumlu, T. and Uzman, I., "Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part," Materials & design, Vol. 28, No. 4, pp. 1271-1278, 2007. https://doi.org/10.1016/j.matdes.2005.12.013
  2. Huang, M. C. and Tai, C. C., "The effective factors in the warpage problem of an injection-molded part with a thin shell feature," Journal of Materials Processing Technology, Vol. 110, No. 1, pp. 1-9, 2001. https://doi.org/10.1016/S0924-0136(00)00649-X
  3. Chang, T. C., "Shrinkage behavior and optimization of injection molded parts studied by the taguchi method," Polymer Engineering & Science, Vol. 41, No. 5, pp. 703-710, 2001. https://doi.org/10.1002/pen.10766
  4. Lyu, M. Y., Mo, J. H. and Chung, W. J., "Shrinkage in Injection Molded Part for Operational Conditions and Resins," Elastomers and Composites, Vol. 38, No. 4, pp. 295-302, 2003.
  5. Liao, S. J., Chang, D. Y., Chen, H. J., Tsou, L. S., Ho, J. R., Yau, H. T. and Hsieh, W. H., "Optimal process conditions of shrinkage and warpage of thin-wall parts," Polymer Engineering & Science, Vol. 44, No. 5, pp. 917-928, 2004. https://doi.org/10.1002/pen.20083
  6. Erzurmlu, T. and Ozcelik, B., "Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method." Materials & design, Vol. 27, No. 10, pp. 853-861, 2006. https://doi.org/10.1016/j.matdes.2005.03.017
  7. Lo, W. C., Tsai, K. M. and Hsieh, C. Y., "Six Sigma approach to improve surface precision of optical lenses in the injection-molding process," The International Journal of Advanced Manufacturing Technology, Vol. 41, No. 9-10, pp. 885-896, 2009. https://doi.org/10.1007/s00170-008-1543-0
  8. Altan, M., "Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods," Materials & Design, Vol. 31, No. 1, pp. 599-604, 2010. https://doi.org/10.1016/j.matdes.2009.06.049
  9. Park, J. C., Kim, K. M., Yin, J. J. and Lee, J. H., "Molding Design Factors Optimization for Maximizing Shrinkage Uniformity of Injection Molded Part using Design of Experiments," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 70-76, 2011.
  10. Park, J. C. and Cha, J. H., "Development of Practical Method to Optimize Two-Quality Characteristics in Injection molded Parts," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 90-97, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.090
  11. Han, S. R., "A Study on the Deformation Optimization of a Plastic Bezel Assembled on the Steering Wheel of an Automobiles," Jorunal of the Korean Society of Manufacturing Process Engineering, Vol. 16, No. 5, pp. 105-112, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.105

피인용 문헌

  1. A Study on the Process Optimization of Microcellular Foamed Ceiling Air-Conditioner 4-Way Panel vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.098