Composites Research

  • 제30권6호
  • /
  • Pages.338-342
  • /
  • 2017
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

원통형 복합재 격자구조체의 구조안전성 평가 기법 연구

Study on Evaluation Method of Structural Integrity of Cylindrical Composite Lattice Structures

  • Im, Jae-Moon (Graduate School of Mechanical Engineering, Hanbat National University) ;
  • Kang, Seung-Gu (Graduate School of Mechanical Engineering, Hanbat National University) ;
  • Shin, Kwang-Bok (Department of Mechanical Engineering, Hanbat National University) ;
  • Lee, Sang-Woo (Defense & Aerospace Division, Hankuk Fiber Group)
  • 투고 : 2017.08.01
  • 심사 : 2017.12.28
  • 발행 : 2017.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 원통형 복합재 격자구조체의 구조안전성 평가 기법에 대해 연구를 수행하였다. 구조안전성 평가는 유한요소해석을 통해 수행하였다. 구조안전성 평가를 위한 최적의 유한요소를 확인하기 위해 원통형 복합재 격자구조체 유한요소모델은 빔, 쉘 그리고 솔리드 요소를 사용해 생성하였다. 쉘과 솔리드 모델의 유한요소 해석결과는 서로 유사하게 발생되었다. 그러나 빔 모델의 경우, 쉘과 솔리드 모델의 결과와 큰 차이가 발생하였다. 이것은 빔 요소가 원통형 복합재 격자구조체 섬유 비교차부의 기계적 물성저하를 고려하지 못하기 때문이다. 원통형 복합재 격자구조체의 구조안전성 평가를 위한 유한요소해석은 쉘 또는 솔리드 요소를 사용해야 하는 것을 확인하였다.

In this paper, evaluation method of structural integrity of cylindrical composite lattice structures was conducted. A finite element analysis was used to evaluate the structural integrity of composite lattice structures. In order to verify the optimal finite element in the evaluation of the structural integrity, finite element models for cylindrical composite lattice structure were generated using beam, shell and solid elements. The results of the finite element analyses with the shell and solid element models showed a good agreement. However, considerable differences were found between the beam element model and the shell and solid models. This occurred because the beam element does not take into account the degradation of the mechanical properties of the non-intersection parts of cylindrical composite lattice structures. It was found that the finite element analysis of evaluation of structural integrity for cylindrical composite lattice structures have to use solid element.

키워드

참고문헌

  1. Vasiliev, V.V., Barynin, V.A., and Rasin, A.F., "Anisogrid Lattice Structures - Survey of Development and Application," Composite Structures, Vol. 54, 2011, pp. 361-370.
  2. Vasiliev, V.V., and Rasin, A.F., "Anisogrid Composite Lattice Structures for Spacecraft and Aircraft Applications," Composite Structures, Vol. 76, 2006, pp. 182-189. https://doi.org/10.1016/j.compstruct.2006.06.025
  3. Vasiliev, V.V., Barynin, V.A., and Razin, A.F., "Anisogrid Composite Lattice Structures - Development and Aerospace Applications," Composite Structures, Vol. 94, 2012, pp. 1117-1127. https://doi.org/10.1016/j.compstruct.2011.10.023
  4. Belardo, M., Paletta, N., and Mercurio, U., "Conceptual Design of the Composite Sandwich Fuselage of a Re-Entry Vehicle," Materialwissenschaft und Werkstofftechnik, Vol. 46, No. 4-5, 2015, pp. 420-430. https://doi.org/10.1002/mawe.201500417
  5. Krishan, P.K., and Muruganantham, P., "Design and Analysis of a typical Inter-Tank Structure of a Launch Vehicle using Integrally Stiffened Construction," International Journal of Research in Engineering & Technology, Vol. 1, No. 1, 2013, pp. 21-34.
  6. Querin, O.M., Toporov, V.V., Liu, D., Busch, L.H., et al., "Topology and Parametric Optimization of a Lattice Composite Fuselage Structure," http://www.altairuniversity.com/wpcontent/uploads/2014/04/Topology_and_Parametric_Optimization-ofa-Latice_Composite_Fuselage-_Structure_as_published.pdf, 2014.
  7. Doh, Y.D., Chung, S.K., Lee, S.W., and Son, J.H., "Design and Fabrication of Filament Wound Composite Lattice Structures," Proceeding of Spring Conference of The Korean Society of Propulsion Engineers, 2010, pp. 421-427.
  8. Doh, Y.D., Chung, S.K., Lee, S.W., and Chang, H.B., "Design and Fabrication of Cone Type Composite Lattice Structures," Proceeding of Spring Conference of the Korean Society of Propulsion Engineers, 2011, pp. 307-311.
  9. Barynin, V.A., Bunakov, V.A., Rasin, A.F., and Vasiliev, V.V., "Aerospace Composite Lattice Structure," Proceeding of ICCM, 2009.
  10. Im, J.M., Shin, K.B., and Lee, S.W., "A Study on Finite Element Modeling for Composite Lattice Structure with Hexagonal Cell," Proceeding of Korean Society for Precision Engineering, 2016, pp. 295.