Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Plugging Effect for Large Diameter Steel Pipe Piles Considering Driveability (CEL Method)

항타시공성을 고려한 대구경 항타강관말뚝의 폐색효과 분석(CEL해석)

  • Jeong, Sang-Seom (Dept. of Civil and Environment Engrg., Yonsei Univ.) ;
  • Song, Su-Min (Dept. of Civil and Environment Engrg., Yonsei Univ.) ;
  • Ko, Jun-Young (Dept. of Civil, Environmental and Construction Engrg., Texas Tech Univ.)
  • Received : 2017.08.24
  • Accepted : 2017.10.18
  • Published : 2017.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the analysis of plugging effect especially when the large diameter steel pipe pile was installed by considering driveability (BPM, blow per meter). The Coupled Eulerian-Lagrangian (CEL) technique was used to simulate the driving of open-ended piles into soil. To consider the driveability, the applied driving energy for each pile was obtained from the analysis results by using the wave equation. The parametric studies were performed for different pile diameters, penetration depths of pile, soil elastic modulus and BPM. It was found that the SPI is almost constant with increasing both the pile diameter and the required driving energy. It is also found that the plugging effect increases with increasing the pile length, resulting in the increase of lateral earth pressure. Based on this study the apparent magnitude and distribution of the lateral earth pressure is proposed for inside portion mobilizing soil plug.

본 연구에서는 항타시공성(BPM, blow per meter)을 고려하여 대구경 항타강관말뚝을 시공하였을 때 발생하는 폐색효과를 분석하였다. Coupled Eulerian-Lagrangian(CEL)해석 시 적용된 항타에너지는 파동방정식을 이용하여 산정하였고, CEL 대변형 3차원 유한요소 해석을 수행하여 말뚝 항타시공 과정을 모사하였다. 본 연구 결과, 말뚝 직경이 증가함에 따라 목표 깊이까지 소요되는 항타에너지는 증가(일정한 BPM인 경우에 해당함) 하였으며, 그 결과 soil plugging index(SPI)는 서로 유사하게 나타나지만 폐색효과는 감소함을 알 수 있었다. 또한, 말뚝의 근입 깊이가 증가할수록 SPI는 서로 유사한 값을 나타냈으나 관내토에서 발생하는 수평토압이 증가하게 되어 폐색효과는 오히려 증가하는 것으로 나타났다. 본 연구결과, 폐색효과의 대표적 영향인자인 말뚝 직경, 말뚝 근입 깊이, 지반 탄성계수, BPM에 따른 관내토의 수평토압계수 분포 경향을 제안하였다.

Keywords

References

  1. AASHTO (2002), Standard Specifications for Highway Bridges, 17 th Ed., American Association of State Highway and Transportation Officials, Washington D.C.
  2. ABAQUS. (2013), ABAQUS user's and theory manuals, Version 6.13. rhode island: Hibbitt, Karlsson & Sorensen, Inc.
  3. Beringen, F. I., Windle, D., and Van Hooydonk, W. R. (1979), "Results of Loading Tests on Driven Piles in Sand", Proceedings of the Conference on Recent Development in the Design and Construction of Piles, ICE, London, Vol.21-22, pp.213-225.
  4. Bowles, J. E. (2002), Foundation Analysis and Design, McGraw-Hill, New York, USA.
  5. Brucy, F., Meunier. J., and Nauroy, J.K. (1991), "Behavior of Pile Plug in Sandy Soils during and After Driving", Proceedings of 23rd Annual Offshore Technology Conference, Houston, 1, pp. 145-154.
  6. Goble, G. G., Raushe, F. R., and Likins, G. E. (1980), "The Analysis of Pile Driving-a State-of-the-art", Proceedings of International Seminar on the Application of Stress-Wave Theory on Piles, Stockholm, Sweden, pp.131-162.
  7. Jeong, S. S., Lee, K. W., Kim, Y. M., and Kim, J. H. (2014), "A Study on the Landslide/debris Flow based on Large Deformation Analysis", Proceedings of the 40th KSCE Conference, Daegu, Korea, pp.271-272 (In Korean).
  8. Jeong, S. S., Lee, K. W., and Ko., J. Y. (2015), "A Study on the 3D Analysis of Debris Flow based on Large Deformation Technique (Coupled Eulerian-Lagrangian)", Journal of the Korean Geotechnical Society, Vol.31, No.12, pp.45-57. (In Korean) https://doi.org/10.7843/kgs.2015.31.12.45
  9. Jeong, S. S., Ko, J. Y., Won, J. O., and Lee, K. W. (2015), "Bearing Capacity Analysis of Open-ended piles considering the Degree of Soil Plugging", Soils and Foundations, Vol.55, No.5, pp.1001-1014. https://doi.org/10.1016/j.sandf.2015.06.007
  10. Kim, Y. H. and Jeong, S. S. (2014), "Analysis of Dynamically Penetrating Anchor based on Coupled Eulerian-Lagrangian (CEL) Methods", Journal of the Korean Society of Civil Engineers, Vol.34, No.3, pp.895-906 (In Korean). https://doi.org/10.12652/Ksce.2014.34.3.0895
  11. Kishida, H. (1967), "The Ultimate Bearing Capacity of Pipe Piles in Sand", Proceedings of the 3rd Asian Regional Conference on Soil Mechanics and Foundation Engineering, Tokyo, Japan, Vol.1, pp.601-612.
  12. Klos, J. and Tejchman, A. (1981), "Bearing Capacity Calculation for Pipe Piles", Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Sweden, Vol.2, pp.751-754.
  13. Ko, J. Y. (2015), Evaluation of Bearing Capacity for Open-Ended Piles with Soil Plugging, Ph.D. thesis, Yonsei University, Seoul.
  14. Ko, J. Y., Jeong, S. S., and Lee, S. Y. (2015), "A Study on the 3D Analysis of Driven Pile Penetration based on Large Deformation Technique (Coupled Eulerian-Lagrangian)", Journal of the Korean Geotechnical Society, Vol.31, No.8, pp.82-97 (In Korean).
  15. Ko, J. Y. and Jeong, S. S. (2015) "Plugging Effect of Open-ended Piles in Sandy Soil", Canadian Geotechnical Journal, Vol.52, No.5, pp.535-547. https://doi.org/10.1139/cgj-2014-0041
  16. Ko, J. Y., Jeong, S. S., and Lee, J. K. (2016), "Large Deformation FE Analysis of Driven Steel Pipe Piles with Soil Plugging", Computers and Geotechnics, Vol.71, pp.82-97. https://doi.org/10.1016/j.compgeo.2015.08.005
  17. Lee, S. Y. (2016), A Study on the Excavation Damage Zone (EDZ) under TBM Excavation, M.S. thesis, Yonsei University, Seoul.
  18. Lee, S. Y., Kim, D, H., and Jeong, S. S. (2017), "A Study on the Excavation Damage Zone (EDZ) under TBM Advancement Based on Large Deformation Technique(CEL)", Journal of the Korean Society of Civil Engineers, Vol.32, No.12, pp.5-13 (In Korean).
  19. Matsumoto, T. and Takei, M. (1991), "Effects of Soil Plug on behavior of Driven Pipe Piles", Soils and Foundations, Vol.31, No.2, pp.14-34. https://doi.org/10.3208/sandf1972.31.2_14
  20. Paik, K. H. (1994), Characteristics of bearing capacities for openended steel pipe piles driven into cohesionless soil, Ph.D. thesis, Korea Advanced Institute of Science Technology, Daejeon, Korea.
  21. Paik, K.H., Salgado, R., Lee, J. H., and Kim, B. J. (2003), "Behavior of Open-and Closed-ended Piles Driven into Sands", Journal of Geotechnical and Geoenvironmental Engineering, Vol.129, No.4, pp.296-306. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:4(296)
  22. Paikowsky, S. G. (1989), A Static Evaluation of Soil Plug behavior with Application to the Pile Plugging Problem, D.Sc. thesis, Massachusetts Institute of Technology Cambridge, MA.
  23. Paikowsky, S. G., Whitman, R. V., and Baligh, M. M. (1989), "A New Look at the Phenomenon of Offshore Pile Plugging", Marine Georesources & Geotechnology, Vol.8, pp.213-230. https://doi.org/10.1080/10641198909379869
  24. Pile Dynamics Inc. (2010), GRLWEAP: Wave Equation Analysis of Pile Driving, Procedure and Models Manual, Cleveland.
  25. Qiu, G., Henke, S., and Grabe, J. (2011), "Application of a Coupled Eulerian-Lagrangian Approach on Geomechanical Problems Involving Large Deformations", Computers and Geotechnics, Vol.38, pp.30-39. https://doi.org/10.1016/j.compgeo.2010.09.002
  26. Szechy, C. H. (1959), "Tests with Tubular Piles", Acta Technica, Hungarian Academy of Science, Vol.24, pp.181-219.
  27. Yamahara, H. (1964), "Plugging Effects and Bearing Mechanism of Steel Pipe Piles", Transportation of the Architectural Institute of Japan, Vol.96, pp.28-35. https://doi.org/10.3130/aijsaxx.96.0_28