DOI QR코드

DOI QR Code

Effects of Mount Eccentricity and External Force Eccentricity on the Vibration Characteristics of Naval Shipboard Equipments Supported by Elastic Mounts

마운트편심과 기진력편심이 함정탑재장비의 진동특성에 미치는 영향

  • Lee, Hyun Yup (Department of Naval Architecture and Ocean Engineering, Chungnam National University) ;
  • Lee, Chung Hyun (Vibration Team, Super Century) ;
  • Ruy, Wonsun (Department of Naval Architecture and Ocean Engineering, Chungnam National University)
  • Received : 2017.07.24
  • Accepted : 2017.10.11
  • Published : 2017.12.20

Abstract

A rigid body supported by 4 linear springs has been analyzed, to investigate the effects of eccentricities on the vibration responses for naval shipboard equipments supported by elastic mounts. Considering mount eccentricity (the location of the center of spring reaction forces relative to the mass center) and excitation force eccentricity (the location of the center of the excitation force relative to the mass center), the vibration phenomena have been formulated and discussed. Also, the effects of the eccentricities have been evaluated and discussed for the elastically mounted naval shipboard equipment. Results show that the mount eccentricity has little effects on the structure-borne noise above the natural frequency of the system, however the excitation force eccentricity has significant effects all over the frequency range.

Keywords

References

  1. Choi, S.H. Kim, K.S. Cho, Y. & Kim, B.G., 2002. A study on the evaluation of vibration characteristics for onboard machinery with resilient mountings. Journal of the Society of Naval Architects of Korea, 39(1), pp.73-81. https://doi.org/10.3744/SNAK.2002.39.1.073
  2. Gatti, G. Kovacic, I. & Brennan, M.J., 2010. On the response of a harmonically excited two degree-of-freedom system consisting of a linear and a nonlinear quasi-zero stiffness oscillator. Journal of Sound and Vibration, 329(10), pp.1823-1835. https://doi.org/10.1016/j.jsv.2009.11.019
  3. Han, H.S. Lee, K.H. & Park, S.H., 2015. Design of the base for the onboard installed equipment to minimize structure-borne noise. Korean Society for Noise and Vibration Engineering, 25(6), pp.432-439. https://doi.org/10.5050/KSNVE.2015.25.6.432
  4. Ji, Y.J. Kwak, J.S. Lee, H.Y. & Kim, S.C., 2015. Optimal arrangement of resilient mount installed on frame support structure at shipboard equipment under shock load. Journal of the Society of Naval Architects of Korea, 52(4), pp.298-304. https://doi.org/10.3744/SNAK.2015.52.4.298
  5. Le, T.D. & Ahn, K.K., 2011. A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat. Journal of Sound and Vibration, 330(26), pp.6311-6335. https://doi.org/10.1016/j.jsv.2011.07.039
  6. Naval Sea Systems Command, 1986. MIL-STD-740-2 (SH) structure-borne vibratory acceleration measurements and acceptance criteria of shipboard equipment, Department of Defence, Naval Sea Systems Command, USA.
  7. Peicheng, S. Peilei, S. Gaofa, N. Ye, T. & Daoyuan, P., 2017. Research on displacement transfer characteristics of a new vibration-isolating platform based on parallel mechanism. Mathematical Problems in Engineering, Volume 2017, Article ID 8743868.
  8. Wang, J. Lu, L. Qian, P. Huang, L. Hua, Y. & Pu, G., 2015. Indirect inverse substructuring method for multibody product transport system with rigid and flexible coupling. Shock and Vibration, Volume 2015, Article ID 106416.