전기학회논문지P (The Transactions of the Korean Institute of Electrical Engineers P)

  • 제66권4호
  • /
  • Pages.263-266
  • /
  • 2017
  • /
  • 1229-800X(pISSN)
  • /
  • 2586-7792(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

PV 모듈 커버글라스 오염방지 코팅의 열처리 특성분석

Characteristics of Annealing Properties of Anti-pollution Coatings for the Cover Glass of PV Module

  • Jung, Sejin (Dept. of Electrical Engineering, Hanbat National University) ;
  • Lim, Yonnsik (Yeoju Institute of Technology) ;
  • Kim, Junghyun (Dept. of Advanced Materials Engineering, Hanbat National University) ;
  • Choi, Wonseok (Dept. of Electrical Engineering, Hanbat National University)
  • 투고 : 2017.10.31
  • 심사 : 2017.11.28
  • 발행 : 2017.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the characteristics of anti-pollution coatings on glass substrates through annealing treatment were investigated. To investigate the change of properties by coating method and number of annealing treatment, after the anti-pollution coating was performed on the surface of glass substrate in three ways, the annealing treatment was performed by setting three kinds of annealing treatment conditions. The annealing treatment method is a torch using gas, which is advantage in that it can be installed directly on the site in an easy way compared with a annealing treatment process which is generally difficult. The anti-pollution properties, contact angle, transmittance, hardness, and adhesion of films on glass substrate were measured under 9 conditions of combination of coating methods and annealing treatment conditions. It was confirmed that as the number of annealing treatment increases, the anti-pollution property of the film synthesized on glass substrate becomes better.

키워드

참고문헌

  1. V. V. Tyagi, Nurul A. A. Rahim, N. A. Rahim, and Jeyraj A./L. Selvaraj, "Progress in solar PV technology: Research and achievement," Renew. Sust. Energ. Rev., vol .20, pp. 443-461, 2013. https://doi.org/10.1016/j.rser.2012.09.028
  2. F. Cao, K. Chen, J. Zhang, X. Ye, J. Li, S. Zou, and X. Su, "Next-generation multi-crystalline silicon solar cells: Diamond-wire sawing, nano-texture and high efficiency," Sol. Energ. Mat. Sol. C., vol. 141, pp. 132-138, 2015. https://doi.org/10.1016/j.solmat.2015.05.030
  3. P. G. Jordan, "The Solar Labor Market-Efficiencies and Productivity," Solar Energy Markets, pp. 111-126, 2014.
  4. Hyunil Kang, Seung Kwon Shin, Hyungchul Kim, Yonnsik Lim, Youngsik Yoo, Yeun-Ho Joung, Junghyun Kim, Won Seok Choi, "Characteristic Analysis of Functional Nano-coating Films Synthesized according to the Annealing Ambient and Fabrication of Anti-pollution PV Module," Trans. Korean Inst. Electr. Eng., vol. 64P, pp. 182-186, 2015.
  5. J. H. Choi, K. S. Kim, G. H. Hwan, G. J. Yu, I. S. Kim, "The effect on Electrical Characteristics according to the Pollution of the Field Exposed PV Modules," proceeding of the KIEE Summer Conference, pp. 1322-1323, 2011.