DOI QR코드

DOI QR Code

Behavior of dry medium and loose sand-foundation system acted upon by impact loads

  • Ali, Adnan F. (Civil Engineering Department, University of Baghdad) ;
  • Fattah, Mohammed Y. (Building and Construction Engineering Department, University of Technology) ;
  • Ahmed, Balqees A. (Civil Engineering Department, University of Baghdad)
  • 투고 : 2017.05.11
  • 심사 : 2017.07.10
  • 발행 : 2017.12.25

초록

The experimental study of the behavior of dry medium and loose sandy soil under the action of a single impulsive load is carried out. Different falling masses from different heights were conducted using the falling weight deflectometer (FWD) to provide the single pulse energy. The responses of soils were evaluated at different locations (vertically below the impact plate and horizontally away from it). These responses include; displacements, velocities, and accelerations that are developed due to the impact acting at top and different depth ratios within the soil using the falling weight deflectometer (FWD) and accelerometers (ARH-500A Waterproof, and Low capacity Acceleration Transducer) that are embedded in the soil and then recorded using the multi-recorder TMR-200. The behavior of medium and loose sandy soil was evaluated with different parameters, these are; footing embedment, depth ratios (D/B), diameter of the impact plate (B), and the applied energy. It was found that increasing footing embedment depth results in: amplitude of the force-time history increases by about 10-30%. due to increase in the degree of confinement with the increasing in the embedment, the displacement response of the soil will decrease by about 25-35% for loose sand, 35-40% for medium sand due to increase in the overburden pressure when the embedment depth increased. For surface foundation, the foundation is free to oscillate in vertical, horizontal and rocking modes. But, when embedding a footing, the surrounding soil restricts oscillation due to confinement which leads to increasing the natural frequency, moreover, soil density increases with depth because of compaction, that is, tendency to behave as a solid medium.

키워드

참고문헌

  1. Al-Ameri, A.F.I. (2014), "Transient and steady state response analysis of soil foundation system acted upon by vibration", Ph.D. Thesis, Civil Engineering Department, University of Baghdad, Iraq.
  2. Al-Homoud, A.S. and Al-Maaitah, O.N. (1996), "An experimental investigation of vertical vibration of model footings on sand", Soil Dyn. Earthq. Eng., 15(7), 431-445. https://doi.org/10.1016/0267-7261(96)00023-1
  3. American Society of Testing and Materials (ASTM) (1969), Standared Test Method for Relative Density of Cohesionless Soils, ASTM D 2049-69 International, West Conshohocken, Pennsylvania, USA.
  4. American Society of Testing and Materials (ASTM) (1969), Standared Test Method for Relative Density of Cohesionless Soils, ASTM D 2049-69 International, West Conshohocken, Pennsylvania, USA.
  5. American Society of Testing and Materials (ASTM) (2000), Standard Test Method for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density, ASTM D4254-00 International, West Conshohocken, Pennsylvania, USA.
  6. American Society of Testing and Materials (ASTM) (2006), "Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer", ASTM D854, West Conshohocken, Pennsylvania, USA.
  7. American Society of Testing and Materials (ASTM) (2006), Standard Test Method for Particle Size-Analysis of Soils, ASTM D422-02 (2002), West Conshohocken, Pennsylvania, USA.
  8. Bhandari, P.K. and Sengupta, A. (2014), "Dynamic aAnalysis of machine foundation", Int. J. Innov. Res. Sci. Eng. Technol., 3(4), 169-176.
  9. Ergun, E., Yilmaz, Y. and Callio.lu, H. (2016), "Free vibration and buckling analysis of the impacted hybrid composite beams", Struct. Eng. Mech., 59(6), 1055-1070. https://doi.org/10.12989/sem.2016.59.6.1055
  10. FatihKarahan, M.M. and Pakdemirli, M., (2017), "Vibration analysis of a beam on a nonlinear elastic foundation", Struct. Eng. Mech., 62(2), 171-178. https://doi.org/10.12989/sem.2017.62.2.171
  11. Fattah, M.Y., Al-Mosawi, M.J. and Al-Ameri, A.F.I. (2016), "Vibrationresponse of saturated sand - foundation system", Earthq. Struct., 11(1), 83-107. https://doi.org/10.12989/eas.2016.11.1.083
  12. Fattah, M.Y., Salim, N.M. and Al-Shammary, W.T. (2015), "Effect of embedment depth on response of machinefoundation on saturated sand", Arab. J. Sci. Eng.,40(11), 3075-3098. https://doi.org/10.1007/s13369-015-1793-8
  13. Kim, Y.S., Miura, K., Miura, S. and Nishimura, M. (2001), "Vibration characteristics of rigid body placed on sand ground", Soil Dyn. Earthq. Eng., 21(1), 19-37. https://doi.org/10.1016/S0267-7261(00)00077-4
  14. Mandal, J.J. and Roychowdhury, S. (2008), "Response of rectangular raft foundations under transient loading", Proceedings, 12th International Conference of International Association for Computer Methods and Advanced in Geomechanis (IACMAG), India, 524-530.
  15. Prakash, S. and Puri, K.V. (2006), "Foundation for vibrating machines", J. Struct. Eng., 33(1), 13-29.
  16. Svinkin, M.R. (2008), "Dynamic effects of impact machine foundations", Geotechnical Earthquake Engineering and Soil Dynamics IV, 1-17).
  17. Turner, J.R. and Kulhawy, F.H. (1987), "Experimental analysis of drilled foundations subjected to repeated axial loads under drained conditions", Report EL-S32S, Electric Power Research Institute, Palo Alto, California.