DOI QR코드

DOI QR Code

Analysis of various composite patches effect on mechanical properties of notched Al-Mg plate

  • Meran, Ahmad P. (Department of Mechatronics Engineering, Faculty of Engineering and Architecture, Necmettin Erbakan University) ;
  • Samanci, Ahmet (Department of Aeronautical Engineering, Faculty of Aeronautics and Astronautics, Necmettin Erbakan University)
  • 투고 : 2016.08.09
  • 심사 : 2017.09.14
  • 발행 : 2017.12.30

초록

In this study, the effect of various adhesively bonded composite patches on mechanical properties of notched Al-Mg alloy plates was analyzed. For this purpose firstly, the un-notched and notched specimens were fabricated from 5086 Al-Mg alloys which have been used in armor-plated military vehicles. The surface notches as a flaw were machined with circular cutting tool to form notch aspect ratio a/c=0.15 and notch-to-thickness ratios a/t=0.5 in the radial direction on the test specimens. Then, various composite patches which reinforced by glass, carbon and Kevlar fibers were bonded adhesively at elliptically surface notches. Finally, experimental measurements conducted by applying tensile static loading. The experimental results showed that repairing with composite patches with order of carbon, glass and Kevlar fibers have remarkable effect on tensile strength of the notched plate. Also the finite element models were developed using Abaqus/Explicit code to predict the tensile strength and elongation of unrepaired notched specimen and specimen repaired by carbon fiber composite patch. The comparison between numerical and experimental results showed good agreement between them and proved the accuracy of numerical modeling.

키워드

과제정보

연구 과제 주관 기관 : Necmettin Erbakan University

참고문헌

  1. Baker, A.A. (1984), "Repair of cracked or defective metallic components with advanced fibre composites: an overview of Australian work", Compos. Struct., 2(2), 153-181. https://doi.org/10.1016/0263-8223(84)90025-4
  2. Baker, A.A. and Jones, R. (1988), Bonded Repair of Aircraft Structures, Springer Netherlands, Netherland.
  3. Baker, A.A., Rose, F. and Jones, R. (2002), Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Vol 1, Elsevier, NewYork.
  4. Baker, A.A., Rose, F. and Jones, R. (2002), Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Vol 2, Elsevier, NewYork, USA.
  5. Baldan, A. (2004), "Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment", J. Mater. Sci., 39(1), 1-49. https://doi.org/10.1023/B:JMSC.0000007726.58758.e4
  6. Benchiha, A., Madani, K., Touzain S., Feaugas, X. and Ratwani, M. (2016), "Numerical analysis of the Influence of the presence of disbond region in adhesive layer on the stress intensity factors (SIF) and crack opening displacement (COD) in plates repaired with a composite patch", Steel Compos. Struct., 20(4) 951-962. https://doi.org/10.12989/scs.2016.20.4.951
  7. Benyahia, F., Aminallah, L., Albedah, A., Bouiadjra, B.B. and Achour, T. (2015), "Experimental and numerical analysis of bonded composite patch repair in aluminum alloy 7075 T6", Mater. Des., 73(15), 67-73. https://doi.org/10.1016/j.matdes.2015.02.009
  8. Campilho, R.D.S.G., Moura, M.F.S.F., Ramantani, D.A., Morais, J.J.L. and Domingues, J.J.M.S. (2009), "Tensile behaviour of three-dimensional carbon-epoxy adhesively bonded single- and double-strap repairs", Int. J. Adhes. Adhesiv., 29(6), 678-686. https://doi.org/10.1016/j.ijadhadh.2009.02.004
  9. Cetisli, F. and Kaman, M.O. (2014), "Numerical analysis of interface crack problem in composite plates jointed with composite patch", Steel Compos. Struct., 16(2) 203-220. https://doi.org/10.12989/scs.2014.16.2.203
  10. Chow, W.T. and Atluri, S.N. (1997), "Composite patch repairs of metal structures: adhesive nonlinearity, thermal cycling, and debonding", AIAA J., 35(9), 1528-1535. https://doi.org/10.2514/2.7481
  11. Dausault Systems Inc. (2010), ABAQUS User's Manual, Version 6.10.
  12. Errouane, H., Deghoul, N., Sereir, Z. and Chateauneuf, A. (2017), "Probability analysis of optimal design for fatigue crack of aluminium plate repaired with bonded composite patch", Struct. Eng. Mech., 61(3) 325-334. https://doi.org/10.12989/sem.2017.61.3.325
  13. Fekirini, H., Bachir Bouiadjra, B., Belhouari, M., Boutabout, B. and Serier, B. (2008), "Numerical analysis of the performances of bonded composite repair with two adhesive bands in aircraft structures", Compos. Struct., 82(1), 84-89. https://doi.org/10.1016/j.compstruct.2006.12.004
  14. Gu, L., Kasavajhala, A.R.M. and Zhao, S. (2011), "Finite element analysis of cracks in aging aircraft structures with bonded composite-patch repairs", Compos Part B: Eng., 42(3), 505-510. https://doi.org/10.1016/j.compositesb.2010.11.014
  15. Heslehurst, R.B. (2014), Defects and Damage in Composite Materials and Structures, CRC Press, USA.
  16. Lena, M.R., Klug, J.C. and Sun, C.T. (1998), "Composite patches as reinforcements and crack arrestors in aircraft structures", J. Aircrft, 35(2), 318-23. https://doi.org/10.2514/2.2302
  17. Liu, X. and Wang, G. (2007), "Progressive failure analysis of bonded composite repairs", Compos. Struct., 81(3), 331-340. https://doi.org/10.1016/j.compstruct.2006.08.024
  18. Mechab, B., Chama, M., Kaddouri, K. and Slimani, D. (2016), "Probabilistic elastic-plastic analysis of repaired cracks with bonded compositepatch", Steel Compos. Struct., 20(6) 1173-1182. https://doi.org/10.12989/scs.2016.20.6.1173
  19. Oudad, W., Madani, K., Bouiadjra, B.B., Belhouari, M., Cohendoz, S., Touzain, S. and Feaugas, X. (2012), "Effect of humidity absorption by the adhesive on the performances of bonded composite repairs in aircraft structures", Compos. Part B: Eng., 43(8), 3419-3424. https://doi.org/10.1016/j.compositesb.2012.01.028
  20. Ouinas, D., Bouiadjra, B.B., Serier, B. and SaidBekkouche, M. (2007), "Comparison of the effectiveness of boron/epoxy and graphite/epoxy patches for repaired cracks emanating from a semicircular notch edge", Compos. Struct., 80(4), 514-522. https://doi.org/10.1016/j.compstruct.2006.07.005
  21. Rose, L.R.F. (1982), "A cracked plate repaired by bonded reinforcement", Int. J. Fract., 18(2), 135-44. https://doi.org/10.1007/BF00019638
  22. Umamaheswar, T.V.R.S. and Singh, R. (1999), "Modelling of a patch repair to a thin cracked sheet", Eng. Fract. Mech., 62(2), 267-289. https://doi.org/10.1016/S0013-7944(98)00088-5
  23. Wang, Q.Y. and Pidaparti, R.M. (2002), "Static characteristics and fatigue behavior of composite-repaired aluminum plates", Compos. Struct., 56(2), 151-155. https://doi.org/10.1016/S0263-8223(01)00176-3
  24. Yoo, J.S., Truong, V.H., Park, M.Y., Choi, J.H. and Kweon, J.H. (2016) "Parametric study on static and fatigue strength recovery of scarf-patch-repaired composite laminates", Compos. Struct., 140, 417-432. https://doi.org/10.1016/j.compstruct.2015.12.041
  25. Young, M.J., Rooke, D.P. and Cartwright, D.J. (1992), "Analysis of patched and stiffened cracked panels using the boundary element method", Int. J. Solid. Struct., 29(17), 2201-16. https://doi.org/10.1016/0020-7683(92)90066-3

피인용 문헌

  1. Towards hybridization of composite patch in repair of cracked Aluminum panel : Numerical and experimental study vol.10, pp.6, 2017, https://doi.org/10.1108/ijsi-03-2019-0015