한국건축시공학회지 (Journal of the Korea Institute of Building Construction)

  • 제17권6호
  • /
  • Pages.483-492
  • /
  • 2017
  • /
  • 1598-2033(pISSN)
  • /
  • 2233-5706(eISSN)
한국건축시공학회 (The Korean Institute of Building Construction)
권호 표지
DOI QR코드

DOI QR Code

동슬래그 및 자철석을 골재로 사용한 중량 콘크리트의 회파블록 적용을 위한 염해저항성 평가

Evaluation of Chloride Attack Resistibility of Heavyweight Concrete Using Copper Slag and Magnetite as Aggregate

  • Moon, Hoon (Department of Architectural Engineering, Pukyong National University) ;
  • Kim, Ji-Hyun (Department of Architectural Engineering, Pukyong National University) ;
  • Lee, Jae-Yong (Department of Architectural Engineering, Pukyong National University) ;
  • Chung, Chul-Woo (Department of Architectural Engineering, Pukyong National University)
  • 투고 : 2017.09.27
  • 심사 : 2017.11.23
  • 발행 : 2017.12.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

최근 국내에서는 다양한 형태로 연안이 개발되고 있다. 이에 따라 안전사고를 예방하고 경관을 저해시키지 않는 새로운 소파블록의 개발이 요구되고 있다. 회파블록은 상부가 평탄하여 친수공간으로 활용이 가능하지만, 구조 내부에 존재하는 회파관으로 인해 중량손실이 발생한다. 따라서 이에 대응하기 위해 중량콘크리트를 사용하여 파랑 저항성을 상승시킬 필요성이 있다. 이러한 목적을 위하여 본 연구에서는 동슬래그 및 자철석을 골재로 사용한 중량 콘크리트를 개발하고 이의 염해저항성을 평가하였다. 연구 결과에 따르면, 일반 골재와 중량골재를 각각 혼입한 콘크리트의 28일 압축강도는 큰 차이가 발생하지 않았으나, ASTM C1202에 의한 염소이온침투저항성 시험 시 자철석을 혼입한 콘크리트는 과도한 전류의 흐름으로 평가가 불가능한 것으로 나타났다. 그러나 염소이온의 침투깊이를 이용하는 NT Build 492 시험에서는 ASTM C 1202 시험법에서 관찰된 문제점 없이 실험 진행이 가능하였고, 동슬래그, 자철석을 골재로 사용한 중량 콘크리트의 염소이온침투저항성이 가장 우수한 것으로 나타났다. 따라서 동슬래그 및 자철석을 골재로 사용한 중량콘크리트는 회파블록에 적용이 가능할 것으로 판단된다.

Recently, the coastal area has become the popular place for infrastructure development. To provide a beautiful scenary of costal area to nearby facilities without any hinderance, and also to protect those facilities from the sea water overflow, it is necessary to develop a new type of wave dissipating block, which is a turning wave block. It is noticeable that the top of the turning wave block is flat and thus can provide spaces for various purposes. However, the unit weight of the block decreases due to the presence of pipeline that is installed for turning the direction of the waves. In order to mitigate such problem, a heavyweight concrete needs to be used to increase the resistance against tidal waves. The copper slag and magnetite were used as a source of fine and coarse aggregate, respectively. The 28 day compressive strength of concrete incorporating ordinary and heavyweight aggregate did not show significant differences. It should be noted that the chloride ion penetration resistance was evaluated using NT-BUILD 492 rather than ASTM C 1202 method because concrete incorporating magnetite as a coarse aggregate showed excessive current flow by ASTM C 1202 method. According to the results from NT Build 492 method, which uses the penetration depth of chlorine ions to obtain chloride ion diffusivity, the heavyweight concrete incorporating the copper slag and the magnetite showed the best resistance against the chloride ion penetration. Therefore, it is reasonable to say that heavyweight concrete made with copper slag and magnetite can be used for production of turning wave block.

키워드

참고문헌

  1. Park YH, Youn DO. Development of a new armor unit against high waves. Journal of the Korea Academia-Industrial. 2016 Jun;17(6):737-43.
  2. Park JS, Kang KR, Kang HS, Kim YH. Projection of the future wave climate changes over the western north pacific. Journal of Korean Society of Coastal and Ocean Engineers. 2013 Oct;25(5):267-75. https://doi.org/10.9765/KSCOE.2013.25.5.267
  3. Seo JH, Park YH, Han TH, Oh YM, Won DH. Structural performance evaluation of new-type wave dissipating block : tri-loc. Journal of Korean Society of Hazard Mitigation. 2016 Aug;16(4):287-93. https://doi.org/10.9798/KOSHAM.2016.16.4.287
  4. Paik IY, Oh YM. Static performance test for new wave dissipating block reinforced with frp. Journal of Korean Society of Coastal and Ocean Engineers. 2011 Dec;23(4):285-91. https://doi.org/10.9765/KSCOE.2011.23.4.285
  5. Lee, JS, Suh KD. Calculation of stability number of tetrapods using weights and biases of ann model. Journal of Korean Society of Coastal and Ocean Engineers. 2016 Oct; 28(5); 277-83. https://doi.org/10.9765/KSCOE.2016.28.5.277
  6. Lee DS, Oh S H, Cho, BS. Experimental investigation on the change of stability coefficient of tetrapod according to difference in density. Journal of Korean Society of Coastal and Ocean Engineers. 2016 Jun; 28(3):124-31. https://doi.org/10.9765/KSCOE.2016.28.3.124
  7. Mun JH, Mun JS, Yang KH. Stress-strain relationship of heavyweight concrete using magnetite aggregate. Journal of the Architectural Institute of Korea Structure & Construction. 2013 Aug;29(8):85-92. https://doi.org/10.5659/JAIK_SC.2013.29.8.85
  8. Ji SW, Seo CH. The application of copper smelting slag as concrete aggregate. Journal of the Korean Recycled Construction Resources Institute. 2006 Dec;3:68-75.
  9. Lee MH. A study on the evaluation of the durability of concrete using copper slag aggregates. Journal of the Korea Concrete Institute. 2008 Dec;20(6):773-84. https://doi.org/10.4334/JKCI.2008.20.6.773
  10. Hong CW, Lee JI, Ryu JH. Characteristics of fresh mortar with particle size and replacement ratio of copper slag. Journal of the Korean Crystal Growth and Crystal Technology. 2016 Feb;26(1):41-8. https://doi.org/10.6111/JKCGCT.2016.26.1.041
  11. ACI Committee 211.1. Standard practice for selectingproportions for normal, heavyweight, and mass concrete(ACI211.1-91). American Concrete Institute. Farmington Hills, MI,2002.
  12. ACI Committee 304. Heavyweight concrete : measuring, mixing, transporting, and placing (ACI 304.3R-96). American Concrete Institute. Farmington Hills, MI, 1996.
  13. ASTM C1202. Standard test method for electrical indication of concrete's ability to resist chloride ion penetration. ASTM International. West Conshohocken, PA, 2005.
  14. NT BUILD 492. Chloride migration coefficient from non-steady-state migration experiments. Nordtest, Taastrup, Denmark, 1999.
  15. Bjegovic D, Stirmer N, Serdar M. Durability properties of concrete with blended cements. Materials and Corrosion. 2012 Oct; 63(12):1087-96. https://doi.org/10.1002/maco.201206699
  16. Teng S, Lim TYD, Divsholi BS. Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag. Construction and Building Materials. 2013 Mar;40:875-81. https://doi.org/10.1016/j.conbuildmat.2012.11.052
  17. Liu X, Chia KS, Zhang MH. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete. Construction and building Materials. 2011 Jan; 25(1):335-43. https://doi.org/10.1016/j.conbuildmat.2010.06.020
  18. Yang WH, Hwang JS, Jeon CS, Lee SH. An Experimental Study on the Chloride Attack Resistibility of Alkali-Activated Ternary Blended Cement Concrete. Journal of the Korea Institute of Building Construction. 2016 Aug;16(4):321-29. https://doi.org/10.5345/JKIBC.2016.16.4.321
  19. Fleet ME. The structure of magnetite. Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry. 1981 Jan;37(4):917-20. https://doi.org/10.1107/S0567740881004597
  20. Reichmann HJ, Jacobsen SD. High-pressure elasticity of a natural magnetite crystal. American Mineralogist. 2004 Jul;89(7):1061-6. https://doi.org/10.2138/am-2004-0718
  21. Yoshida J, Iida S. X-ray diffraction study on the low temperature phase of magnetite. Journal of the Physical Society of Japan, 1977 Jul;42(1):230-37. https://doi.org/10.1143/JPSJ.42.230