참고문헌
- ANSI/IEEE Std 1-1986. 1986. IEEE Standard General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation : IEEE STANDARDS ASSOCIATION.
- Chun, Y. H., and Kwon, L. J. 1997. "Accelerated Life Test and Data Analysis of the Silver Through Hole Printed Wiring Board." J Korean Soc Qual Manag 25(2):15-27.
- Jung, J. H., Kim, M. S., Lim, H., and Kim, Y. S. 2013. "A Study on Accelerated Life of Halogen Lamps for Medical Device." J Korean Soc Qual Manag 41(4):659-672. https://doi.org/10.7469/JKSQM.2013.41.4.659
- Kim, S. B., and Kim, S. H. 2015. "Estimation of Elevator Wire Life Using Accelerated Degradation Model." J Korean Soc Qual Manag 43(1):409-420. https://doi.org/10.7469/JKSQM.2015.43.3.409
- Lim, H., and Lim, D-E. 2015. "Planning Accelerated Degradation Tests: the Case of Gamma Degradation Process." J Korean Soc Qual Manag 43(2):169-184. https://doi.org/10.7469/JKSQM.2015.43.2.169
- Lim, H. 2012. "Optimal Design of Accelerated Degradation Tests under the Constraint of Total Experimental Cost in the Case that the Degradation Characteristic Follows a Wiener Process." J Korean Soc Qual Manag 40(2):117-125. https://doi.org/10.7469/JKSQM.2012.40.2.117
- Kim, J-H., Kim, D-H., Hwang, J-K., and Kim, S. 2011. "Research on the Resources Investigations of Small Hydropower Generation in Northern Gyeong-Buk Area." Journal of Korea Water Resources Association 31(5):459-456.
- Han, S. W., Kwak, S. B., and Choi, N. S. 2014. "Accelerated Life Prediction of Ethylene-Propylene Diene Monomer Rubber Subjected to Combined Degradation." Trans. Korean Soc. Mech. Eng. 38(5):505-511. https://doi.org/10.3795/KSME-A.2014.38.5.505
- ANSI/IEEE Std 98-1984. 1984. IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulting Materials : IEEE STANDARDS ASSOCIATION.
- ANSI/IEEE Std 99-1980. 1980. IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation for Insulation Systems for Electrical Equipment : IEEE STANDARDS ASSOCIATION.
- ANSI/IEEE Std 275-1981. 1981. IEEE Recommended Practice for Thermal Evaluation of Systems of Insulating Materials for Random-Wound AC Electric Machinery : IEEE STANDARDS ASSOCIATION.
- Regulatory Guide 1.89 Rev. 1. 1984. Environmental Qualification of Criteria Electric Equipment Important to Safety for Nuclear Power Plants. U.S. Nuclear Regulatory Commission : OFFICE OF NUCLEAR REGULATORY RESEARCH.