한국항공우주학회지 (Journal of the Korean Society for Aeronautical & Space Sciences)

  • 제44권11호
  • /
  • Pages.981-988
  • /
  • 2016
  • /
  • 1225-1348(pISSN)
  • /
  • 2287-6871(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

혼성동력계에서 주요 설계변수가 제동성능에 미치는 효과분석

Effect of the Design Parameters Change on the Hybrid Dynamometer Braking Performance

  • Lee, Jong-Hoon (Department of Aerospace and Mechanical Engineering, Graduate School at KAU) ;
  • Hwang, Jai-Hyuk (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Jeong, Min-Ji (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Kwon, Jun-Yong (The 7th Research and Development Institute, ADD)
  • 투고 : 2016.10.08
  • 심사 : 2016.10.19
  • 발행 : 2016.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

브레이크 동력계는 브레이크의 성능을 시험하는 장치로 시험구역, 기계적 관성구역, 전기모터 및 제어구역으로 구성된다. 혼성동력계는 기계적 관성 구역의 크기를 줄이고 전기모터를 이용하여 브레이크 작동에 따른 기계적 관성의 손실을 보상하는 방식으로 상대적으로 작은 기계적 관성 크기와 적은 비용으로 시험이 가능한 장점이 있다. 본 논문에서는 공간적 제약이 있는 실험실에 적절한 혼성동력계를 설계하였고, 설계된 혼성동력계에서 마찰계수 변화 등 주요 설계변수가 혼성동력계 제동성능에 미치는 영향을 분석하였다. 본 연구를 통해 축소된 기계적 관성에 의한 에너지 손실을 보상하기 위한 전기 모터의 토크를 측정하면 마찰재의 불량여부를 판단 할 수 있는 결과를 얻었다.

Dynamometer is a device for testing the performance of the brake and it is composed of a test zone, the mechanical inertia zone, the electric motor and the control zone. Hybrid dynamometer is a way to compensate for the loss of mechanical inertia in accordance with the brake operation by using an electric motor to reduce the size of the mechanical inertia with the advantage that can be tested in the relatively small size of the mechanical inertia and low cost. In this paper, design the proper size of hybrid dynamometer in the laboratory level with the space constraints, analysed the effect of critical parameter on the braking performance of hybrid dynamometer such as changing the friction coefficient. With this study, could get the results of guideline to judge the poor friction material by measuring the torque of the electric motor to compensate the energy loss due to a reduced mechanical inertia.

키워드

참고문헌

  1. Ann Johnson "From Dynamometers to Simulations : Transforming Brake Testing Technology into Antilock Brake Systems", Fordham University, Bronx, NY, USA, 2001, Chapter 4. pp. 199-201.
  2. Talib Ria Jaafar, Mohamad Soib Selamat, and Ramlan Kasiran "Selection of Best Formulation for Semi-Metallic Brake Friction Materials Development", www.intechopen.com.
  3. James K. Thompson, Aaron Marks, "Inertia Simulation in Brake Dynamometer Testing", SAE Technical Paper 2002-01-2601
  4. Jijie Ma, Boda Wu, Xiaoyu Liu and Jingyang Sun "A New Method of Inertia Simulation in Brake Dynamometer Testing", SAE Technical Paper Series 2008-01-2578.
  5. J. H. Lee, J. H. Hwang, J. Y. Yang, Y. H. Joo, J. S. Bae, J. Y. Kwon, "Design of the Compound Smart Material Pump for Brake System of Small.Medium Size UAV", Journal of The Society for Aerospace System Engineering, Volume 9, No. 3, 2015, pp. 1-7.
  6. J. H. Lee, J. H. Hwang, J. Y. Yang, Y. W. Ju, J. S. Bae, J. Y. Kwon, " Design of Compound Smart Material Pump for an Aircraft Brake System", Proceedings of 2015 Asian Pacific Conference on Aerospace Technology and Science, May 20-23, 2015.
  7. Y. H. Joo, J. H. Hwang, J. Y. Yang, J. S. Bae, J. H. Lee, J. Y. Kwon, "On the Performance Test of the Piezoelectric-Hydraulic Pump", Journal of the Korean Society for Aeronautical & Space Science, Volume 43, No. 9, 2015, pp. 822-829. https://doi.org/10.5139/JKSAS.2015.43.9.822
  8. M. J. Jeong, J. H. Hwang, J. S. Bae, J. Y. Kwon, "On the Pressurization Characteristics of Small-Piezoelectric Hydraulic Pump for Brake System", Journal of the Korean Society for Aeronautical & Space Science, Volume 43, No.11, 2015, pp. 963-970. https://doi.org/10.5139/JKSAS.2015.43.11.963
  9. Cleveland Wheels & Brake, AWBPC 00001-12/USA, "Product Catalog".
  10. Nak Yoon Choi, Han Young Ko, Jong Hoon Lee, "Small Aircraft Manual-Power Generating Type Brake System Design and Analysis Report", ASDC-501-980853, 1998, pp 5-8.
  11. G.P. Ostermeyer, "Friction and wear of brake systems", Forschung im Ingenieurwesen 66(2001), 2001, pp 267-272. https://doi.org/10.1007/s100100100063
  12. Wei-Yi Loh, R. Hecht Basch, D. Li and P. Sanders, "Dynamic Modeling of Brake Friction Coefficients", SAE Technical Paper Series 2000-01-2753.
  13. http://www.matweb.com/
  14. Emad Said Addasi, "Modelling and Simulation of DC-Motor Electric Drive Control System with Variable Moment of Inertia", ACEEE Int. J. of Electrical and Power Engineering, Vol. 4, No.1, Feb. 2013.
  15. Austin Huges, "Electric Motors and Drives, Fundamentals, Types and Application", Third Edition, ELSEVIER, pp. 82-102
  16. ABB Co. Ltd., DC Motor Data.