DOI QR코드

DOI QR Code

The Evaluation for Slip Risk of Various Hospital's zones

병원 내 다양한 구역의 미끄럼 위험성 평가 연구

  • Kang, Hyun-Su (Department of Industrial Engineering, Ajou University) ;
  • Park, Peom (Department of Industrial Engineering, Ajou University)
  • 강현수 (아주대학교 산업공학과) ;
  • 박범 (아주대학교 산업공학과)
  • Received : 2016.07.20
  • Accepted : 2016.09.19
  • Published : 2016.09.30

Abstract

Floor slipperiness is a leading cause in slip and fall accidents which are a major source of occupational injuries in Korea. Researchers have estimated the slip and fall related accidents rank number one or two in number of the injured. The objectives of this study were to find the field contamination effect and improvement countermeasure. Slipping and falling are common accidents in large public facilities, especially facility which vulnerable adults generally use as like hospital. So, we measured the coefficient of friction of several floors on the floor in hospital, under dry and wet using BOT-3000. The results of the coefficient of friction measurements showed that floor type and surface conditions were all significant factors affecting the coefficient of friction. The most surprising finding of this study was that there were significant friction improvement when the floors were properly cleaned with cleaning equipments.

Keywords

References

  1. Lockhart T.E(1997), Biomechanics of slip and falls in the elderly. a thesis of master of science in industrial engineering. Texas Tech Univ.
  2. 2010 Population census report(2011), National statistical office.
  3. Sihvonen S(2004), Postural Balance and Aging, Cross-sectional Comparative Studies and a Balance Training Intervention. Studies in Sport Physical Education and Health 101. University of JYV SKYL
  4. Ruchinskas R(2003), "Clinical prediction of falls in the elderly.", American Geriatric Society, 51(6):841-846. https://doi.org/10.1046/j.1365-2389.2003.51267.x
  5. Shin W.C. et. al.(2007). Study for KOSHA-STAT. OSHRI report.
  6. Shin W.C. et. al(2008). The study for avoiding accidents caused by STF(slip, trip and fall). OSHRI report.
  7. Choi H.J,, Kim M.K., Kim J.S.(2015). Epidemiological investigation of occupational falls and preventing measures in the service area. KOSHA.
  8. Kim J.S.(2011). The development of green anti-slip outsole and it's field study. OSHRI report.
  9. The assessment of pedestrian slip risk, www.hse.gov.uk/pubns/web/slips 01.pdf.
  10. Leamon T.B and Murphy P.L(1995), "Occupational slips and falls: more than a trivial problem", Ergonomics. 38:487-498. https://doi.org/10.1080/00140139508925120
  11. Kim J.S.(2007), Study for KOSHA-STAT Robot. OSHRI report. 2007-119-1048.
  12. L. Strandberg L. Lanshammar H(1981), "The dynamics of slipping accidents.", Journal of Occupational Accidents, 3:153-162. https://doi.org/10.1016/0376-6349(81)90009-2
  13. Leclercq. S(1999), "Prevention of same level falls: a more global application of this type of accident.", Journal of safety research, 30(2):103-112. https://doi.org/10.1016/S0022-4375(99)00004-3
  14. IAPA(2007), "Preventing Slips/Falls and Loss of Balance in Industrial Workplaces.", www.iapa.ca/resources/resources_downloads.asp,:4.
  15. Courtney T.K., Sorock G.S, Manning D.P, Collins J.W, Holbein-Jenny M.A(2001), "Occupational slip, trip, and fall-related injuries can the contribution of slipperiness be isolated.", Ergonomics, 44(13):1118-1137. https://doi.org/10.1080/00140130110085538
  16. Strandberg L., Lanshammar H.(1981), "The dynamics of slipping accidents.", Journal of Occupational Accidents, 3:153-162. https://doi.org/10.1016/0376-6349(81)90009-2
  17. Courtney T.K, Chang W-R., Gronqvist R, Redfern M.S(2001), "The measurement of slipperiness-an international scientific symposium." Ergonomics, 44(13):1097-1101. https://doi.org/10.1080/00140130110085510
  18. Strandberg L.(1985), "The effect of conditions underfoot on falling and overexertion accidents." Ergonomics, 28(1):131-147. https://doi.org/10.1080/00140138508963123
  19. Strandberg L. Hildeskog L. Ottoson A.-L(1985), "Footwear friction assessed by walking experiments." VTI report 300 A. Swedish Road Traffic Research Institute Linkoping:12.
  20. R. O. Andres and D. B. Chaffin, ""Ergonomic analysis of slip-resistance measurement devices" Ergonomics, Vol. 28:1065-1079, 1985. https://doi.org/10.1080/00140138508963228
  21. Perkins P.J(1978), "Measurement of slip between the shoe and ground during walking. In: Anderson, C., Senne, J. (Eds.), Walkway Surfaces: Measurement of Slip Resistance, STP 649.", American Society for Testing and Materials (ASTM), Baltimore :71-87.
  22. Brungraber R.J(1976). An overview of floor resistance research with annotated bibliography. National Bureau of Standards, NBS Technical Note 895, Washington, D. C.
  23. Perkins P.J, Wilson M.P(1983), "Slip resistance testing of shoes-new developments." Ergonomics, 26:73-82. https://doi.org/10.1080/00140138308963314
  24. Stevenson M.G. Hoang K. Bunterngchit Y. Lloyd D.(1989), "Measurement of slip resistance of shoes or floor surfaces Part I: Methods." ournal of Occupationnal Health and Safety, Australia and New Zealand. 5(2):115-120.
  25. Harris G.W, Shaw S.R(1988), "Slip resistance of floors: Users' opinions, Tortus instrument readings and roughness measurement." Journal of Occupational Accidents. 9(4):287-298. https://doi.org/10.1016/0376-6349(88)90019-3
  26. Manning D.P. Jones C. Bruce M.(1990), "Proof of shoe slip resistance by a walking traction test." Journal of Occupational Accidents. 12:255-270. https://doi.org/10.1016/0376-6349(90)90050-6
  27. Manning D.P. Jone C.(1994), "The superior slip-resistance of footwear compound T66/103." Safety Science, 18:45-50. https://doi.org/10.1016/0925-7535(94)90040-X
  28. Chang W.R, "The effect of surface roughness on the measurement of slip resistance." International Journal of Industrial Ergonomics, 24(3):299-313. https://doi.org/10.1016/S0169-8141(98)00038-9
  29. Chang W.R. Simon M.(2001), "The slip resistance of common footwear materials measured with two slipmeters." Applied Ergonomics, 32(6):549-558. https://doi.org/10.1016/S0003-6870(01)00031-X