DOI QR코드

DOI QR Code

Confirmation Method of Target Detection for Vehicle Mounted Metal Detector

  • Received : 2016.07.26
  • Accepted : 2016.10.25
  • Published : 2016.10.31

Abstract

In this paper, the confirmation method of target detection for the vehicle mounted metal detector (MD) has been described. The vehicle mounted MD with the arrayed 6 coils to detect the width of 2.4 m was demonstrated. It is important and necessary to inform the location of the objects detected by the MD. The confirmation method of target detection was verified by using the MD GUI and the analysis of the receive signal processing. The receive signal processing is performed by comparing the threshold and the difference of the signal calibrated at initial location and the signal detected at present location.

Keywords

References

  1. Carl V. Nelson et al, "Wide Bandwidth Time-Domain Electromagnetic Sensor for Metal Target Classification," IEEE Transaction on geoscience and remote sensing, vol. 39, no. 6, pp. 1129-1138, June 2001. https://doi.org/10.1109/36.927425
  2. Claudio Bruschini, "A Multidisciplinary Analysis of Frequency Domain Metal Detectors for Humanitarian Demining," Thesis of Ph.D degree, Brussel University, 2002.
  3. Waymond R. Scott, "Broadband Array of Electromagnetic Induction Sensors for Detecting Buried Landmines," IEEE International Geoscience and Remote Sensing Symposium, vol. 2, 2008.
  4. Bobae Kim, Jungwon Yoon, Seung-eui Lee, Seung-hoon Han, and Kangwook Kim, "Pulse induction metal detector with time-domain bucking circuit for landmine detection," IET Electronics Letters, vol. 51, no. 2, pp. 159-161, Jan. 2015. https://doi.org/10.1049/el.2014.3895
  5. Byung-Min Jung, Yu-Shin Chang and Seung-Hoon Han, "Coil Design of Pulse Induction Metal Detector," The Journal of Korean Institute of Electromagnetic Engineering and Science, 26(4), pp. 389-396, Apr. 2015. https://doi.org/10.5515/KJKIEES.2015.26.4.389
  6. Martin Misakian, "Equations for the Magnetic Field Produced by One or More Rectangular Loops of Wire in the Same Plane," Journal of Research of the National Institute of Standards and Technoloty, vol. 105, no. 4, pp. 557-564, July 2000. https://doi.org/10.6028/jres.105.045