DOI QR코드

DOI QR Code

Experimental Investigation of the Thermal Hydraulics in Lead Bismuth Eutectic-Helium Experimental Loop of an Accelerator-Driven System

  • Xi, Wenxuan (Institute of Engineering Thermophysics, Chinese Academy of Sciences) ;
  • Wang, Yongwei (Institute of Engineering Thermophysics, Chinese Academy of Sciences) ;
  • Li, Xunfeng (Institute of Engineering Thermophysics, Chinese Academy of Sciences) ;
  • Huai, Xiulan (Institute of Engineering Thermophysics, Chinese Academy of Sciences) ;
  • Cai, Jun (Institute of Engineering Thermophysics, Chinese Academy of Sciences)
  • 투고 : 2016.01.26
  • 심사 : 2016.04.19
  • 발행 : 2016.10.25

초록

The heat transfer characteristics between liquid lead bismuth eutectic (LBE) and helium are of great significance for the two-loop cooling system based on an accelerator-driven system (ADS). This paper presents an experimental study on the resistance characteristics and heat transfer performance in a LBE-helium experimental loop of ADS. Pressure drops in the LBE loop, the main heat transfer, and the coupled heat transfer characteristics between LBE and helium are investigated experimentally. The temperature of LBE has a significant effect on the LBE thermo-physical properties, and is therefore considered in the prediction of pressure drops. The results show that the overall heat transfer coefficient increases with the increasing helium flow rate and the decreasing inlet temperature of helium. Increasing the LBE Reynolds number and LBE inlet temperature promotes the heat transfer performance of main heat transfer and thus the overall heat transfer coefficient. The experimental results give an insight into the flow and heat transfer properties in a LBE-helium heat exchanger and are helpful for the optimization of an ADS system design.

키워드

참고문헌

  1. C. Rubbia, Status of the Energy Amplifier Concept, Proceeding of the 2nd International Conference on Accelerator-driven Transmutation Technologies and Applications, Kalmar, Sweden, 1996.
  2. L. Cinotti, G. Gherardi, The Pb-Bi cooled XADS status of development, J. Nucl. Mater. 301 (2002) 8-14. https://doi.org/10.1016/S0022-3115(01)00721-8
  3. T. Schulenberg, X. Cheng, R. Stieglitz, Thermal-hydraulics of Lead-Bismuth for Accelerator Driven Systems, The 11th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Avignon, France, 2005.
  4. S. Ishiyama, Y. Muto, Y. Kato, S. Nishio, T. Hayashi, Y. Nomoto, Study of steam, helium and supercritical $CO_2$ turbine power generations in prototype fusion power reactor, Prog. Nucl. Energ. 50 (2008) 325-332. https://doi.org/10.1016/j.pnucene.2007.11.078
  5. X. Cheng, N.I. Tak, Investigation on turbulent heat transfer to lead-bismuth eutectic flows in circular tubes for nuclear applications, Nucl. Eng. Des. 236 (2006) 385-393. https://doi.org/10.1016/j.nucengdes.2005.09.006
  6. R.N. Lyon, Liquid metal heat transfer coefficients, Chem. Eng. Progr. 47 (1951) 75-79.
  7. P.L. Kirillov, The summary of experimental data on heat transfer in liquid metals, At. Energ. 13 (1962) 481-484.
  8. W.K. Stromquist, Effect of wetting on heat transfer characteristics of liquid metals, United States Atomic Energy Commission, Technical Information Service, 1953.
  9. W.M. Ma, E. Bubelis, A. Karbojian, B.R. Sehgal, P. Coddington, Transient experiments from the thermal-hydraulic ADS lead bismuth loop (TALL) and comparative TRAC/AAA analysis, Nucl. Eng. Des. 236 (2006) 1422-1444. https://doi.org/10.1016/j.nucengdes.2006.01.006
  10. W.M.Ma,A.Karbojian,B.R.Sehgal,T.N.Dinh,Thermal-hydraulic performance of heavy liquidmetal in straight-tube and U-tube heat exchangers, Nucl. Eng. Des. 239 (2009) 1323-1330. https://doi.org/10.1016/j.nucengdes.2009.03.014
  11. R. Stieglitz, J. Knebel, C. Fazio, G. Muller, K. Jurgen, Heavy Liquid Metal Technologies Development in Kalla, Proceedings of the 2006 International Congress on Advances in Nuclear Power Plants (ICAPP06), Reno, (NE), 2006.
  12. H. Xu, Y. He, P. Luo, China's Accelerator Driven Sub-critical System (ADS) Program, AAPPS Bull. 25 (2015).
  13. F. Chen, J. Cai, X. Li, X. Huai, 3D numerical simulation of fluid-solid coupled heat transfer with variable property in a LBE-helium heat exchanger, Nucl. Eng. Des. 274 (2014) 66-76. https://doi.org/10.1016/j.nucengdes.2014.04.024
  14. OECD/NEA Nuclear Science Committee, Handbook on Lead-bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-hydraulics and Technologies, Organisation for Economic Co-Operation and Development, France, 2007.
  15. W.M. Ma, A. Karbojian, B.R. Sehgal, Experimental study on natural circulation and its stability in a heavy liquid metal loop, Nucl. Eng. Des. 237 (2007) 1838-1847. https://doi.org/10.1016/j.nucengdes.2007.02.023
  16. S.W. Qian, Heat Exchanger Design Handbook, Chemical Industry Press, Beijing, 2002.
  17. H. Petersen, The Properties of Helium: Density, Specific Heats, Viscosity, and Thermal Conductivity at Pressures from 1 to 100 Bar and from Room Temperature to about 1800 K, 1970. Danish Atomic Energy Commission, RISO-224, Denmark.