DOI QR코드

DOI QR Code

인버터 서지와 온도 스트레스 하에서 Magnet Wire 절연 수명평가

Insulation Life Estimation for Magnet Wire Under Inverter Surge and Temperature Stress

  • 박재준 (중부대학교 전기전자공학과)
  • Park, Jae-Jun (Department of Electrical Electronic Engineering, Joongbu University)
  • 투고 : 2016.09.19
  • 심사 : 2016.09.24
  • 발행 : 2016.10.01

초록

Coil specimen was prepared by coating a copper wire with two varnish thin layers: the first was polyamideimide (PAI)/nanosilica (5 wt%) varnish and the second was anti-corona PAI/nanosilica (15 wt%) varnish. Insulation breakdown voltage was investigated under inverter surge condition at $20^{\circ}C$, $70^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, respectively. The insulation lifetime of the two layered coil was tens of times longer than that of original PAI coil. And the insulation lifetime decreased with increasing ambient temperature because there was weak binding strength between copper and varnish layer.

키워드

참고문헌

  1. H. Okubo, N. Hayakawa, and G. C. Montanari, IEEE TRNS. DIELECTR. ELECTR. INSUL., 14, 6, 1516-1530 (2007). [DOI: http://dx.doi.org/10.1109/TDEI.2007.4401236]
  2. H. Kikuchi and H. Hanawa, IEEE TRNS. DIELECTR. ELECTR. INSUL., 19, 1, 99-106 (2012). [DOI: http://dx.doi.org/10.1109/TDEI.2012.6148507]
  3. Y. Kikuchi. T. Murata, Y. Uozumi, N. Fukumoto, M. Nagata, Y. Wakimoto, and T. Yoshimitsu, IEEE TRNS. DIELECTR. ELECTR. INSUL., 15, 6, 1617-1625 (2008). [DOI: http://dx.doi.org/10.1109/TDEI.2008.4712665]
  4. E. Ildstad and S. R. Chalise, Proc. IEEE Conf. (2009) p. 85-88. [DOI: http://dx.doi.org/10.1109/ceidp.2009.5377720]
  5. G. C. Stone, I. Culbert, E. A. Boulter, and H. Dhirani, IEEE Press Series on Power Engineering (2004).
  6. E. Sugimoto, IEEE Electrical Insulation Magazine, 5, 1, 15-23, 1989. [DOI: http://dx.doi.org/10.1109/57.16949]
  7. Indian Standard Winding Wires-Test Methods Part 5 Electrical Properties (First Revision) ICS 29.060.10 (2012).
  8. J. J. Park, Y. B. Park, and J. Y. Lee, Trans. Electr. Electron. Mater., 12, 93 (2011). [DOI: http://dx.doi.org/10.4313/TEEM.2011.12.3.93]
  9. Y. Kikuchi, T. Murata, Y. Uozumi, N. Fukumoto, M. Nagata, Y. Wakimoto, and T. Yoshimitsu, IEEE TRNS. DIELECTR. ELECTR. INSUL., 15, 6, 1617-1625 (2008) [DOI: http://dx.doi.org/10.1109/TDEI.2008.4712665]
  10. H. Kikuchi and H. Hanawa, IEEE TRNS. DIELECTR. ELECTR. INSUL., 19, 1, 99-106 (2012). [DOI: http://dx.doi.org/10.1109/TDEI.2012.6148507]
  11. M. Q. Nguyen, D. Malec, D. Mary, P. Werynski, B. Gornicka, L. Therese, and Ph. Guillot, Proc. IEEE Electrical Insulation Conference (2009) p. 377-381.
  12. M. Q. Nguyen, D. Malec, D. Mary, P. Werynski, B. Gornicka, L. Therese, and P. Guillot, IEEE TRNS. DIELECTR. ELECTR. INSUL., 17, 5 (2010). https://doi.org/10.1109/TDEI.2010.5411996
  13. G. Zhang, T. Lin, L. Zhang, and G. Wu, Proc. IEEE International Conf., 2, 904-907 (2004).
  14. F. Guastavino and A. Ratto, IEEE Electrical Insulation Magazine, 28, 4, 35-41 (2012). [DOI: http://dx.doi.org/10.1109/MEI.2012.6232008]