참고문헌
- Lee, C. S., Kim, D. N., Hong, D. H., and Lee, S. H., "Control and Mechanism Design of Fully Automatic Sunvisor Using Photo Sensor," KSPE Spring Conference, pp. 319-320, 2006.
- Kim, T. H. and Jeon, E. S., "Definition of the Sunvisor Operating Range of Information and Sunshade," Korea Society of Automotive Engineers Conference Spring, pp. 824-826, 2014.
- Kim, T. H. and Jeon, E. S., "Pivot Arm Mechanism Design of Glass Type Sunvisor Using Inverse Kinematics," Korea Society of Automotive Engineers Annual Conference and Exhibition, pp. 919-920, 2014.
- Lin, L. C. and Yuan, K., "Control of Flexible Joint Robots Via External Linearization Approach," Journal of Robotic Systems, Vol. 7, No. 1, pp. 1-22, 1990. https://doi.org/10.1002/rob.4620070102
- Tomei, P., "A Simple PD Controller for Robots with Elastic Joints," IEEE Transactions on Automatic Control, Vol. 36, No. 10, pp. 1208-1213, 1991. https://doi.org/10.1109/9.90238
- Yeon, J. S. and Park, J. H., "Practical Robust Control for Flexible Joint Robot Manipulators," Proc. Of IEEE International Conference on Robotic and Automation, pp. 3377-3382, 2008.
- Jiang, Z.-H. and Goto, A., "Visual Sensor based Vibration Control and End-Effector Control for Flexible Robot Arms," IEEE International Conference on Industrial Technology, pp. 383-388, 2005.
- Shin, H. S. and Rhim, S. S., "Analysis of Lateral Vibration of an Axially Translating Flexible Link," Korean Society for Noise and Vibration Engineering Autumn Conference, pp. 706-707, 2013.
- Shin, H. S. and Rhim, S. S., "Comparison of Rayleigh and Euler-Bernoulli model for Vibration Analysis of An Axially Moving Flexible Link," Korean Society of Mechanical Engineers Spring Conference, pp. 2260-2262, 2012.
- Kim, G.-H. and Lee, S.-G., "Tip Position Control of a Flexible Cantilever based on Kalman Estimation Using an Accelerometer," J. Korean Soc. Precis. Eng., Vol. 28, No.5, pp. 591-598, 2011.
- Kim, J.-W., Yang, H.-S., and Park, Y.-P., "Fuzzy Vibration Control of 3 DOF Robot Manipulator with Flexible Link," Transactions of the Korean Society of Mechanical Engineers A, Vol. 20, No. 12, pp. 3883-3891, 1996. https://doi.org/10.22634/KSME-A.1996.20.12.3883
- Shin, H. C., Choi, S. B., and Kim, S. H., "Position and Vibration Control of Flexible 2-Link Robot Arm Using Piezoelectric Actuators and Sensors," J. Korean Soc. Precis. Eng., Vol. 17, No. 11, pp. 206-212, 2000.
- Li, K. and Darby, A. P., "Modelling a Buffered Impact Damper System Using a Spring-Damper Model of Impact," Structural Control and Health Monitoring, Vol. 16, No. 3, pp. 287-302, 2009. https://doi.org/10.1002/stc.238
- Kim, S.-H., Kang, H.-J., and Moon, D.-H., "Vibration Transfer Characteristic of Foaming Sponge Seat with the Auxiliary Member for Movie Theater Chair," Journal of the Korean Society for Power System Engineering, Vol. 17, No. 6, pp. 40-46, 2013. https://doi.org/10.9726/kspse.2013.17.6.040
- Kim, S., Kang, H., Kim, T., and Moon, D., "Vibration Transfer Characteristic of Foaming Sponge Chair Seat," Journal of the Korean Society for Power System Engineering, Vol. 16, No. 1, pp. 24-29, 2012.
- Karimi, A., Navidbakhsh, M., and Haghpanahi, M., "Constitutive Model for Numerical Analysis of Polyvinyl Alcohol Sponge Under Different Strain Rates," Journal of Thermoplastic Composite Materials, Vol. 28, pp. 1-10, 2015. https://doi.org/10.1177/0892705715604801
- Karimi, A., Navidbakhsh, M., and Faghihi, S., "Fabrication and Mechanical Characterization of a Polyvinyl Alcohol Sponge for Tissue Engineering Applications," Perfusion, Vol. 30, No. 7, pp. 1-7, 2013.
- Cha, H. K. and Sohn, J. H., "Handling and Ride Comfort Simulation of the Truck by Using ADAMS," Korea Society of Automotive Engineers Annual Conference and Exhibition, pp. 48-53, 2013.
- Zhou, Q., Bao, J., and Cheng, M., "Simulation and Analysis of High-Speed Low-End Suv Ride Comfort based on Adams/Car Ride," in Recent Advances in Computer Science and Information Engineering, Vol. 126, pp. 311-316, 2012.
- Gu, J., Wang, H., Wang, C., Pang, M., and Jin, X., "The Parameter Optimization and Performance Analysis of the Suspension System in the Cab of a Heavy Truck," Proc. of International Conference on Computer and Computing Technologies in Agriculture, Vol. 419, pp. 16-24, 2014.
- MSC Software Corporation, "Adams 2015 Student Edition," http://www.mscsoftware.co.kr./student-editions, (Accessed 7 September 2015)
- Shimizu, H., Shimizu, T., Tokuyama, M., Masuda, H., and Nakamura, S., "Numerical Simulation of Positioning Error Caused by Air-Flow-Induced Vibration of Head Gimbals Assembly in Hard Disk Drive," IEEE Transactions on Magnetics, Vol. 39, No. 2, pp. 806-811, 2003. https://doi.org/10.1109/TMAG.2003.808928
- Li, L., and Li, Q., "Vibration Analysis based on Full Multi-Body Model for the Commercial Vehicle Suspension System," Proc. of the 6th WSEAS International Conference on Signal Processing, pp. 203-207, 2007.
- Strydom, A. and Els, P. S., "Vibration Isolation Analysis of a Stabilized Platform Mounted on a Small Off-Road Vehicle," Proc. of 9th South African Conference on Computational and Applied Mechanics, pp. 228-236, 2014.
- Choi, J. and Kang, N., "Run-Flat Tire Optimization Using Response Surface Method and Genetic Algorithm," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 25, No. 4, pp. 247-254, 2015. https://doi.org/10.5050/KSNVE.2015.25.4.247
- Moon, H.-L., Lm, J.-S., and Kim, H.-Y., "Shape Optimization of an Automotive Wheel Bearing Seal Using the Response Surface Method," Transactions of the Korean Society of Automotive Engineers, Vol. 18, No. 6 pp. 84-90, 2010.
- Jang, J., Jung, W., Lee, D., Jung, J., and Jung, S. H., "The Structure Optimization Research of the Automation Welding Equipment of the Large L-Type Using the Response Surface Method," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 22, No. 1, pp. 138-144, 2013. https://doi.org/10.7735/ksmte.2013.22.1.138
- Khuri, A. I., "Response Surface Methodology and Related Topics," World Scientific, pp. 52-160, 2006.