Journal of Technologic Dentistry (대한치과기공학회지)

Korean Academy of Dental Technology (대한치과기공학회)
권호 표지
DOI QR코드

DOI QR Code

Surface Characteristics of Ground and Post-Sintered Zirconia

지르코니아의 소결 후 특성

  • Kim, Min-Jeong (Department of Medical & Biological Engineering, Graduate School, Kyungpook National University) ;
  • Kim, Im-Sun (Department of Dental Technology, Daegu Health College) ;
  • Choi, Byung-Hwan (Department of Dental Technology, Daegu Health College) ;
  • Kim, Won-Gi (Department of Dental Technology, Daegu Health College)
  • 김민정 (경북대학교 의용생체공학과) ;
  • 김임선 (대구보건대학교 치기공과) ;
  • 최병환 (대구보건대학교 치기공과) ;
  • 김원기 (대구보건대학교 치기공과)
  • Received : 2016.06.20
  • Accepted : 2016.09.20
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: It is to compare and evaluate the change of the wear rate and phase variation of the Zirconia before and after the sintering after the grinding by a high speed equipment manufactured for the Zirconia. Methods: The specimen of the sintered Zirconia was manufactured as size of $15mm{\times}15mm{\times}2mm$. The grinding has been applied to each of all pieces of each test groups for a minute fit for each condition at same speed of 50,000 rpm by a diamond bur at high speed handpiece with injection of the air and water. For the observation of the surface before and after the sintering of the each test piece, the cross section of it was observed as 100 magnification by a scanning electron microscope after it was coated by PT, and the diffraction analysis was performed by XDR to compare the crystal phase of the Zirconia. The average surface roughness value of all specimens were evaluated. The wear test was performed at room temperature by applying a load of 1kg for 120,000 cycles for the chewing period 6 months. Wear was analyzed for the enamel cusps by measurement of the vertical substance loss with a laser scanner. Conclusion: The phase variation from the tetragonal phase to the monoclinic phase was confirmed in the test group of the pre-sintered Zirconia after the grinding, and the value of the surface roughness and the wear rate was increased in experimental group.

Keywords

References

  1. Denry I, Holloway JA. Microstructural and crystallographic surface changes faer grinding zirconia-based dental ceramics, J Biomed Mater Res, 76B, 440-48, 2006. https://doi.org/10.1002/jbm.b.30382
  2. Heintze SD, Rousson V. Survival of irconia-and metal-supported fixed dental prostheses: a systemic review. Int J Prosthodont, 23: 493-502, 2010.
  3. Heintze SD, Zappini G, Rousson V. Wear of ten dental restorative materials in five wear simulators - results of a round robin test. Dent Mater, 21, 304-317, 2005. https://doi.org/10.1016/j.dental.2004.05.003
  4. Helvey GA. Zirconia and computer-aided design/computer-aided manufacturing (CAD/CAM)dentistry. Functional Esthet Rest Dent, Series J(3), 28-39, 2007.
  5. Kim HJ, Lim HP, Park YJ, Vang MS. Effect of zirconia surface treatments on the shear bond strength of veneering ceramic. J Prosthet Dent, 105, 315-322, 2011. https://doi.org/10.1016/S0022-3913(11)60060-7
  6. Karakoca S, Yilmaz H. Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics. J Biomed Mater Res, 91B, 930-937, 2009. https://doi.org/10.1002/jbm.b.31477
  7. Kosmac T, Oblac C, Jevnikar P, Funduk N, Marion L. Strength and reliability of surface treated Y-TZP dental ceramics. J Biomed Mater Res, 53, 304-313, 2000. https://doi.org/10.1002/1097-4636(2000)53:4<304::AID-JBM4>3.0.CO;2-S
  8. Kisi EH, Howard C. Crystal structures of zirconia phases and their inter-relation. Key Engineering Materials, 153, 1-36, 1998.
  9. Lee JH, Lee SJ, Lee JY, Ki SH, Lee JM, Properties of the machinability of dental zirconia using a handpiece and the zirconia brazing. The Korean Wellding Joining Society Spring, 176-176, 2013.
  10. Kim JE, Analysis on the bonding characteristics of interface between zirconia and veneered porcelain. Graduate school of Kyung Hee University, 2007.
  11. Lee JY, The effects of surface grinding and polishing on the phase transformation and Flexural Strength of Zirconia. Graduate school of Chosun University, 2014.
  12. Jones CS, Billington RW, Pearson GJ. he in vivo perception of roughness of restoration. Br Dent J, 196, 42-45, 2004. https://doi.org/10.1038/sj.bdj.4810881
  13. Manicone PF, Rossi Iommetti P, Raffaelli L. An overview of zirconia ceramics: basic properties and clinical applications. J Dent, 35(11), 819-826, 2007. https://doi.org/10.1016/j.jdent.2007.07.008
  14. Lambrechets P, Braem M, Vuylsteke-Wauters M, Vanherle G. Quantitative in vivo wear of human enamel. J Dent Res, 68, 1752-1754, 1989. https://doi.org/10.1177/00220345890680120601
  15. Masayuki K, Kunio I, Norihiko K. Effects of Zirconia Addition on Fracture Toughness and Bending Strength of Dental Porcelains. J Dental Mat, 9(2), 181-192, 1990. https://doi.org/10.4012/dmj.9.181
  16. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials. 20(1), 1-25, 1999. https://doi.org/10.1016/S0142-9612(98)00010-6
  17. Quirynen M. The clinical meaning of the surface roughness and the surface free energy of intra-oral hard substrata on the microbiology of the supra-and subgingival plaque:results of in vitro and in vivo experiments. J Dent, 22 Suppl 1, S13-6, 1994. https://doi.org/10.1016/0300-5712(94)90165-1
  18. Saracc D, Turk T, Elekdag-Turk S, Saracc YS. Comparison of 3 polishing techniques for 2 all-ceramic materials. Int J Prosthodont. 20, 465-468, 2007.
  19. Sakaguchi RL, Douglas WH, DeLong R, Pintado MR. The wear of a posterior composite in an artificial mouth: A clinical correlation. Dent Mater, 2, 235-240, 1986. https://doi.org/10.1016/S0109-5641(86)80034-3
  20. Jang SA, Kim YY, Park WH, Lee, YS. Comparative study of fracture strength depending on the occlusal thickness of full zirconia crown. J Koeran Acad Prosthodont, 51, 160-166, 2013. https://doi.org/10.4047/jkap.2013.51.3.160
  21. Sato T, Shimada M. Transformation of yttria-doped tetragonal $ZrO_2$ poly crystals by annealing under controlled humidity conditions. J Amer Ceram Soc, 68(12), C320-C322, 1985. https://doi.org/10.1111/j.1151-2916.1985.tb15233.x
  22. Seghi RR, Rosenstiel SF, Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res, 70, 221-225, 1991. https://doi.org/10.1177/00220345910700031301
  23. Siegel SC, Fraunhofer JA. Dental cutting with diamond burs: heavy-handed or light-touch. J Prosthodont, 8, 3-9, 1999. https://doi.org/10.1111/j.1532-849X.1999.tb00002.x
  24. Steiner M, Mitsias ME, Ludwig K, Kern M. In vitro evaluation of a mechanical testing chewing simulator. Dent Mater, 25, 494-499, 2009. https://doi.org/10.1016/j.dental.2008.09.010
  25. Bae TS, Properties of Dental CAD/CAM Zirconia. korean Dental Association, 49(5), 260-264, 2011.
  26. Vagkopoulou T, Koutayas SO, Koidis P. Zirconia indentistry: Part 1. Discovering the nature of an upcoming bioceramic. Eur J Esthet Dent, 4(2), 130-151, 2009

Cited by

  1. 유-무기 하이브리드 코팅액 제조를 위한 지르코니아 표면의 소수화 개질 연구 vol.34, pp.2, 2017, https://doi.org/10.12925/jkocs.2017.34.2.260