Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지
DOI QR코드

DOI QR Code

A technique for fabricating abutment replica with hot melt adhesive material to minimize residual cement in implant restoration: a case report

임플란트 보철 합착 시 잔여 시멘트 최소화를 위해 열가소성 접착제를 이용한 복제 지대주 제작 방법: 증례보고

  • Seo, Chi-Won (Department of Prosthodontics and Institute of Oral Bio-Science, School of Dentistry, Chonbuk National University) ;
  • Han, A-Reum (Department of Prosthodontics and Institute of Oral Bio-Science, School of Dentistry, Chonbuk National University) ;
  • Seo, Jae-Min (Department of Prosthodontics and Institute of Oral Bio-Science, School of Dentistry, Chonbuk National University) ;
  • Lee, Jung-Jin (Department of Prosthodontics and Institute of Oral Bio-Science, School of Dentistry, Chonbuk National University)
  • 서치원 (전북대학교 치의학전문대학원 치과보철학교실 및 구강생체과학연구소) ;
  • 한아름 (전북대학교 치의학전문대학원 치과보철학교실 및 구강생체과학연구소) ;
  • 서재민 (전북대학교 치의학전문대학원 치과보철학교실 및 구강생체과학연구소) ;
  • 이정진 (전북대학교 치의학전문대학원 치과보철학교실 및 구강생체과학연구소)
  • Received : 2016.08.08
  • Accepted : 2016.08.25
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Removal of excess cement is important to prevent biological complication in cementation of implant restoration with subgingival margin. It can be difficult to completely remove excess cement. Several techniques have been introduced to minimize excess cement using abutment replica. In this case report, a simple method for making abutment replica with hot melt adhesive material in dental office was described. This technique is simple and effective because it can be used for pre-fabricated or custom abutment without additional laboratory procedure. In addition, it can minimize excess cement after cementation of implant restoration.

치은 연하 변연을 갖는 임플란트 수복물 장착시 잔여 합착제의 제거는 임플란트 생물학적 합병증을 예방하기 위해 매우 중요하다. 치은 연하 잔여 합착제를 최소화하기 위해 인상용 실리콘이나 자가중합형 레진을 이용하여 복제 지대주를 제작하는 여러 방법이 소개되었다. 본 증례에서는 열가소성 접착제(hot melt adhesive material)를 이용하여 복제 임플란트 지대주(abutment replica)제작하는 방법을 소개하고자 한다. 이 방법은 간단하고 부가적인 기공과정이 필요 없어 진료실에서 쉽게 이용할 수 있어 이에 보고하는 바이다.

Keywords

References

  1. Hebel KS, Gajjar RC. Cement-retained versus screw-retained implant restorations: achieving optimal occlusion and esthetics in implant dentistry. J Prosthet Dent 1997;77:28-35. https://doi.org/10.1016/S0022-3913(97)70203-8
  2. Liang T, Hu X, Zhu L, Pan X, Zhou Y, Liu J. Comparative in vitro study of cementing techniques for implant-supported restorations. J Prosthet Dent 2016;116:59-66. https://doi.org/10.1016/j.prosdent.2016.01.014
  3. Chee WW, Duncan J, Afshar M, Moshaverinia A. Evaluation of the amount of excess cement around the margins of cement-retained dental implant restorations: the effect of the cement application method. J Prosthet Dent 2013;109:216-21. https://doi.org/10.1016/S0022-3913(13)60047-5
  4. Wadhwani C, Pineyro A. Technique for controlling the cement for an implant crown. J Prosthet Dent 2009;102:57-8. https://doi.org/10.1016/S0022-3913(09)60102-5
  5. Galvan G, Kois JC, Chaiyabutr Y, Kois D. Cemented implant restoration: a technique for minimizing adverse biologic consequences. J Prosthet Dent 2015;114:482-5. https://doi.org/10.1016/j.prosdent.2014.10.017
  6. Lee JH, Park IS, Sohn DS. A digital approach to fabricating an abutment replica to control cement volume in a cement-retained implant prosthesis. J Prosthet Dent 2016;116:25-8. https://doi.org/10.1016/j.prosdent.2016.01.008
  7. Rayyan MM, Makarem HA. A modified technique for preventing excess cement around implant supported restoration margins. J Prosthet Dent 2016 Jul 23. doi:10.1016/j.prosdent.2016.04.007. [Epub ahead of print]
  8. Li W, Bouzidi L, Narine SS. Current research and development status and prospect of hot-melt adhesives: a review. Ind Eng Chem Res 2008;47:7524-32. https://doi.org/10.1021/ie800189b
  9. Dimashkieh MR, Rayyan MR. Chairside technique for expediting indirect interim restorations. J Prosthet Dent 2016;115:510-1. https://doi.org/10.1016/j.prosdent.2015.09.025
  10. Siamos G, Winkler S, Boberick KG. Relationship between implant preload and screw loosening on implant-supported prostheses. J Oral Implantol 2002;28:67-73. https://doi.org/10.1563/1548-1336(2002)028<0067:TRBIPA>2.3.CO;2
  11. Wadhwani C, Goodwin S. Chung KH. Cementing an implant crown: a novel measurement system using computational fluid dynamics approach. Clin Implant Dent Relat Res 2016;18:97-106. https://doi.org/10.1111/cid.12258
  12. Hermann JS, Buser D, Schenk RK, Schoolfield JD, Cochran DL. Biologic width around one-and twopiece titanium implants. Clin Oral Implants Res 2001;12:559-71. https://doi.org/10.1034/j.1600-0501.2001.120603.x
  13. Gapski R, Neugeboren N, Pomeranz AZ, Reissner MW. Endosseous implant failure influenced by crown cementation: a clinical case report. Int J Oral Maxillofac Implants 2008;23:943-6.
  14. Pauletto N, Lahiffe BJ, Walton JN. Complications associated with excess cement around crowns on osseointegrated implants: a clinical report. Int J Oral Maxillofac Implants 1999;14:865-8.
  15. Wadhwani C, Rapoport D, La Rosa S, Hess T, Kretschmar S. Radiographic detection and characteristic patterns of residual excess cement associated with cement-retained implant restorations: a clinical report. J Prosthet Dent 2012;107:151-7. https://doi.org/10.1016/S0022-3913(12)60046-8

Cited by

  1. Full mouth rehabilitation of fully edentulous patient with implant-supported fixed prosthesis preceding bone graft: A case report vol.56, pp.1, 2018, https://doi.org/10.4047/jkap.2018.56.1.77
  2. 구개부 치조골 결손을 보이는 상악 전치 상실부의 임플란트 심미보철수복: 증례보고 vol.33, pp.4, 2016, https://doi.org/10.14368/jdras.2017.33.4.291