Abstract
This paper describes the development of a data bus analyzer for use in avionics systems integration test. The data bus analyzer is equipped with MIL-STD-1553B, CAN and Ethernet interface cards which is incorporated in a majority of the avionics systems to accommodate a variety of interfaces. It has an individual hardware for a capture engine and a analyzing engine in order to perform the collection and the analysis of the bus data at the same time efficiently. It provides a data display function of the grid, 2-dimensional and 3-dimensional form to increase the data analysis efficiency. Verification of the data bus analyzer was carried out module unit testing and inter-module integration testing on the basis of the test procedures. Verification of interlocking requirement and usefulness of developed equipment was confirmed through an integration test result performed on a system integration laboratory of aircraft which is an actual testing environment.
본 논문에서는 항공전자시스템 통합시험에 사용하기 위한 데이터 버스 분석 장비 개발에 대해 기술하였다. 본 데이터 버스 분석 장비는 다양한 인터페이스를 수용할 수 있도록 대부분의 항공전자시스템에 채택되고 있는 MIL-STD-1553B, CAN(Controller Area Network), Ethernet 인터페이스 카드를 갖추었다. 버스 데이터의 수집과 분석을 동시에 효율적으로 수행하기 위해 수집 엔진과 분석 엔진은 각각의 하드웨어를 가진다. 데이터 분석 효율성을 높이기 위해 Grid, 2D 및 3D 형태의 데이터 전시 기능을 제공한다. 데이터 버스 분석 장비의 검증은 시험 절차서에 입각하여 모듈 단위 테스트 및 모듈 간 통합 테스트를 수행하였다. 실제 시험 환경인 비행체 SIL(System Integration Laboratory) 환경에서 수행된 통합시험 결과를 통해 연동 요구도 검증 및 개발된 장비의 유용성을 확인하였다.