DOI QR코드

DOI QR Code

하이브리드 시스템의 ESS를 이용한 기상변화의 파장별 LED 항공유도등 동작특성

The Operation Characteristic of the LED Taxi Light for Wavelength According to Meteorological Changes for Hybrid System Using a ESS

  • Hwang, Lark-Hoon (Department of Electrical Engineering, Semyung University) ;
  • Kim, Jin-Sun (Department of Electrical Engineering, Semyung University) ;
  • Na, Yong- Ju (Department of Electrical Engineering, Semyung University)
  • 투고 : 2016.06.16
  • 심사 : 2016.08.29
  • 발행 : 2016.08.30

초록

본 논문에서는 태양광과 풍력을 조합한 하이브리드 발전시스템을 이용하여 승압 쵸퍼와 PWM (pulse width modulation) 전압형 인버터인 전력변환기로 구성하였고, 또한 PWM 전압형 인버터는 태양전지가 연속 발전할 수 없는 단점을 보완하기 위해 일반 상용전원과 연계하고 에너지저장장치 (ESS; energy storage system)를 상시 운영하여 공항의 기상 변화에 따른 파장별 LED 항공 유도등을 효율적으로 운용하는 시스템을 구성 하였다. 태양전지에 대한 특성 해석과 수학적 모델링을 통한 시뮬레이션을 행하여 태양전지 특성 사양과 비교하였고, PWM 전압형 인버터와 위상동기를 위해서 계통전압을 검출하여 계통전압과 인버터 출력을 동상 운전하므로 잉여전력을 계통과 연계할 수 있게 하였으며 공항의 활주로, 항공 유도등에 적용하여 양호한 동특성을 얻을 수 있는 제어회로를 동시에 개발하여 항공유도등의 다양성을 추구할 수 있음을 확인 하였다.

In this study, the system was composed of the booster chopper and the power converter, which is a pulse width modulation (PWM) voltage inverter using a hybrid power generation system solar cell energy and wind force, Furthermore, in order to compensate the PWM voltage type inverter was linked with the general commercial power source, and through a normal operation of energy storage system (ESS), the system operated the LED Taxi Light by Wavelength according to Meteorological Changes at the airport in an efficient manner. The performance of the system was compared with the solar cell characteristics specification. In addition, for phase synchronization with the PWM voltage type inverter, the grid voltage was detected so as to operate the grid voltage and inverter output in the same phase and to connect the surplus electric power with the system. Finally, by developing a control circuit at the same time from which an excellent dynamic characteristics can be obtained through applying to the airport runway taxi light, it was concluded that a variety of taxi light can be pursued.

키워드

참고문헌

  1. Van Der Broeck, Heinz, G.Sauerlander, and M.Wendt, "Power driver topologies and control schemes for LEDs," in APEC 07-Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, Anaheim: CA, pp. 1319-1325, 2007.
  2. H. J. Chiu, Y. K. Lo, J. T.Chen, S. J. Cheng, C. Y. Lin, and S. C. Mou, "A high-efficiency dimmable LED driver for low-power lighting applications," IEEE Transactions on Industrial Electronics, Vol.57, No.2, pp. 735-743, 2010. https://doi.org/10.1109/TIE.2009.2027251
  3. X. X. Wang, K. Murakami, O. Sugiyama, and S. Kaneko "Piezoelectric properties, densification behavior and microstructural evolution of low temperature sintered PZT ceramics with sintering aids," Journal European Ceramic Society, Vol 21, No. 10, pp. 1367-1373, 2011. https://doi.org/10.1016/S0955-2219(01)00020-6
  4. S. Zhang, R. Xia and T. R. Shrout, "Low temperature sintering and properties of piezoelectric ceramics PSNT-Mn with $LiBiO_2$ addition," Materials Science and Engineering: B, Vol. 129, No. 1-3, pp. 131-138, 2006. https://doi.org/10.1016/j.mseb.2006.01.001
  5. R. Zno, L. Li and Z. Gui, "Modified cofiring behaviors between PMN-PNN-PZT piezoelectric ceramics and PZT-doped 70Ag-30Pd alloy metallization," Material Science Engineering, Vol. 1, A326, No. 1,pp. 202-207, 2012.
  6. K. Nagata, J. Thongrueng, and K. Kato, "Evaluation of the reliability of piezoelectric ceramic transformers," Japan Journal Apply Physics, Vol. 36. No. 9B, pp. 6103-6108, 2007.
  7. S. K. Na, "A study on the power converter control of the photovoltaic generation system for controlling the temperature and humidity of hospital room", Ph.D dissertation, Semyung University, Chungcheongbuk-do, Korea, 2008.
  8. D. Cericola and R. Kotz "Hybridization of rechargeable batteries and electrochemical capacitors: principles and limits," Electrochimica Acta 72, pp. 1-17, 2012. https://doi.org/10.1016/j.electacta.2012.03.151
  9. "LED Lighting and Supercapacitors" KEMET Corporation 2013.
  10. J. Hu, Y. Fuda, M. Katsuno and T. Yoshida. "A study on the rectangular-bar-shaped multilayer piezoelectric transformer using length extensional vibration mode," Japan Journal Apply Physics, Vol. 38, No. 5B, pp. 3208-3212, 2009.
  11. S. Kawashima, S. Tagami, H. Hakamata, A. Fukuoka and K. Isobe, "Development of color-LCD backlight inverters utilizing piezoelectric transformer," NEC Research and Development, Vol. 36, No. 1, pp. 187-199, 2005.
  12. N. Narendran, N. Maliyagoda, L. Deng, and R. Pysar "Characterizing LEDs for general illumination applications: mixed-color and phosphor-based white source," SPIE Proceedings, Vol. 1, No.2 pp. 4445-4450, 2011.
  13. R. Itoh, and D. Eng, "Steady-state and transient characteristics for a single way step-down PWM GTO voltage-source converter with sinusoidal supply current," IEE Proceedings, Vol. 136, No. 4 pp. 168-174, July 1989
  14. S. Nonaka, K. Kesamaru, K. Yamasaki, "Interconnection system with sinusoidal output PWM current source Inverter between photovoltaic arrays and the utility line," in Proceeding of International Power Electronics Conference, IPEC-Tokyo, Tokyo: Japan, pp. 144-151, 2009.