References
- Rajagopalan, K. and Nihous, G. C., 2013, "Estimates of Global Ocean Thermal Energy Conversion (OTEC) Resources using an Ocean General Circulation Model," Renewable Energy, Vol. 50, pp. 532-540. https://doi.org/10.1016/j.renene.2012.07.014
- Berger, L. R. and Berger, J. A., 1986, "Countermeasures to Microbiofouling in Simulated Ocean Thermal-Energy Conversion Heat-Exchangers with Surface and Deep Ocean Waters in Hawaii," Applied and Environmental Microbiology, Vol. 51, pp. 1186-1198.
- Meegahapola, L., Udawatta, L. and Witharana, S., 2007, "The Ocean Thermal Energy Conversion Strategies and Analysis of Current Challenges," Proceeding of Second International Conference on Industrial and Information Systems (ICIIS 2007), Sri Lanka.
- Ahmadi, P., Dincer, I. and Rosen, M. A., 2013, "Energy and Exergy Analyses of Hydrogen Production via Solar-boosted Ocean Thermal Energy Conversion and PEM Electrolysis," International Journal of Hydrogen Energy, Vol. 38, pp. 1795-1805. https://doi.org/10.1016/j.ijhydene.2012.11.025
- Yeh, R. H., Su, T. Z. and Yang, M. S., 2005, "Maximum Output of an OTEC Power Plant," Ocean Engineering, Vol. 32, pp. 685-700. https://doi.org/10.1016/j.oceaneng.2004.08.011
- Sun, F. M., Ikegami, Y., Jia, B. and Arima, H., 2012, "Optimization Design and Exergy Analysis of Organic Rankine Cycle in Ocean Thermal Energy Conversion," Applied Ocean Research, Vol. 35, pp. 38-46. https://doi.org/10.1016/j.apor.2011.12.006
- Yang, M. H. and Yeh, R. H., 2014, "Analysis of Optimization in an OTEC Plant Using Organic Rankine Cycle," Renewable Energy, Vol. 68, pp. 25-34. https://doi.org/10.1016/j.renene.2014.01.029
- Yamada, N., Hoshi, A. and Ikegami, Y., 2009, "Performance Simulation of Solar-boosted Ocean Thermal Energy Conversion Plant," Renewable Energy, Vol. 34, pp. 1752-1758. https://doi.org/10.1016/j.renene.2008.12.028
- Wang, T., Ding, L., Gu, C. and Yang, B., 2008, "Performance Analysis and Improvement for CCOTEC system," Journal of Mechanical Science and Technology, Vol. 22, pp. 1977-1983. https://doi.org/10.1007/s12206-008-0742-9
- Nguyen, V. H. and Lee, G. S., 2013, "Performance Investigation of Solar-heating Ocean Thermal Energy Conversion (SH-OTEC) in Korea," Trans. Korean Soc. Mech. Eng. B., Vol. 37, pp. 43-49. https://doi.org/10.3795/KSME-B.2013.37.1.043
- Ozcelik, Y., 2007, "Exergetic Optimization of Shell and Tube Heat Exchangers using a Genetic Based Algorithm," Applied Thermal Engineering, Vol. 27, pp. 1849-1856. https://doi.org/10.1016/j.applthermaleng.2007.01.007
- Selbas, R., Kizilkan, O. and Reppich, M., 2006, "A New Design Approach for Shell-and-tube Heat Exchangers using Genetic Algorithms from Economic Point of View," Chemical Engineering and Processing, Vol. 45, pp. 268-275. https://doi.org/10.1016/j.cep.2005.07.004
- Tayal, M. C., Fu, Y. and Diwekar, U. M., 1999, "Optimal Design of Heat Exchangers: a Genetic Algorithm Framework," Industrial Engineering Chemical research, Vol. 38, pp. 456-467. https://doi.org/10.1021/ie980308n
- Ponce-Ortega, J. M., Serna-Gonzalez, M. and Jimenez-Gutierrez, A., 2009, "Use of Genetic Algorithms for the Optimal Design of Shell-and-tube Heat Exchangers," Applied Thermal Engineering, Vol. 29, pp. 203-209. https://doi.org/10.1016/j.applthermaleng.2007.06.040
- Caputo, A. C., Pelagagge, P. M. and Salini, P., 2008, "Heat Exchanger Design Based on Economic Optimi-zation," Applied Thermal Engineering, Vol. 28, pp. 1151-1159. https://doi.org/10.1016/j.applthermaleng.2007.08.010
- Ghosh, S., Ghosh, I., Pratihar, D.K., Maiti, B. and Das, P.K., 2011, "Optimum Stacking Pattern for Multi-stream Plate-fin Heat Exchanger through a Genetic Algorithm," International Journal of Thermal Sciences, Vol. 50, pp. 214-224. https://doi.org/10.1016/j.ijthermalsci.2010.07.003
- Allen, B. and Gosselin, L., 2008, "Optimal Geometry and Flow Arrangement for Minimizing the Cost of Shell and Tube Condensers," International Journal of Energy Research, Vol. 32, pp. 958-969. https://doi.org/10.1002/er.1398
- Sanaye, S. and Hajabdollahi, H., 2010, "Thermaleconomic Multi-objective Optimization of Plate Fin Heat Exchanger using Genetic Algorithm," Applied Energy, Vol. 87, pp. 1893-1902. https://doi.org/10.1016/j.apenergy.2009.11.016
- Hajabdollahi, H., Ahmadi, P. and Dincer, I., 2011, "An Exergy-Based Multi-Objective Optimization of a Heat Recovery Steam Generator (HRSG) in a Combined Cycle Power Plant (CCPP) using Evolutionary Algorithm," International Journal of Green Energy, Vol. 8, pp. 44-64. https://doi.org/10.1080/15435075.2010.529779
- Najafi, H., Najafi, B. and Hoseinpoori, P., 2011, "Energy and Cost Optimization of a Plate and Fin Heat Exchanger using Genetic Algorithm," Applied Thermal Engineering, Vol. 31, pp. 1839-1847. https://doi.org/10.1016/j.applthermaleng.2011.02.031
- Fettaka, S., Thibault, J. and Gupta, Y., 2013, "Design of Shell-and-tube Heat Exchangers using Multiobjective Optimization," International Journal of Heat and Mass Transfer, Vol. 60, pp. 343-354. https://doi.org/10.1016/j.ijheatmasstransfer.2012.12.047
- Amini, M. and Bazargan, M., 2014, "Two Objective Optimization in Shell-and-tube Heat Exchanger using Genetic Algorithm," Applied Thermal Engineering, Vol. 69, pp. 278-285. https://doi.org/10.1016/j.applthermaleng.2013.11.034
- Klein, S. A., 2013, Engineering Equation Solver (EES), fChart Software Inc.
- High Performance Tube, Inc., available from: www.highperformancetube.com
- Wolverine Tube, Inc., available from: www.wlv.com
- Costa, A. L. H. and Queiroz, E. M., 2008, "Design Optimization of Shell-and-tube Heat Exchangers," Applied Thermal Engineering, Vol. 28, pp. 1798-1805. https://doi.org/10.1016/j.applthermaleng.2007.11.009
- Kalac, S. and Liu, H., 1998, Heat Exchangers: Selection, Rating and Thermal Design, CRC Press LLC, Florida.
- Serth, R. W., 2007. Process Heat Transfer Principles and Applications, Elsevier Ltd., Texas.
- Cavallini, A., Censi, G., Col, D. D., Doretti, L., Longo, G.A., Rossetto, L. and Zilio, C., 2003, "Condensation inside and outside Smooth and Enhanced Tubes-a Review of Recent Research," International Journal of Refrigeration, Vol. 26, pp. 373-392. https://doi.org/10.1016/S0140-7007(02)00150-0
- Holland, J. H., 1975, "Adaptation in Natural and Artificial Systems," University of Michigan Press, Ann Arbor.
- Guo, D., Liu, M., Wang, J. and Xie, L., 2014, "Optimization in Plate-fin Safety Structure of Heat Exchanger using Genetic and Monte Carlo Algorithm," Applied Thermal Engineering, Vol. 70, pp. 342-349.
- Konak, A., Coit, D. W. and Smith, A. E., 2006, "Multi-objective Optimization using Genetic Algorithms: A Tutorial," Reliability Engineering and System Safety, Vol. 91, pp. 992-1007. https://doi.org/10.1016/j.ress.2005.11.018
- Nguyen, M. P. and Lee, G. S., 2011, "Characteristics of the Water Pressure Drop Considering Heat Transfer in the Evaporator and Condenser of a Water Chiller," Trans. Korean Soc. Mech. Eng. B, Vol. 35, No. 12, pp. 1293-1300. https://doi.org/10.3795/KSME-B.2011.35.12.1293
- Kim, S., Yang, J. and Choi, S., 2013, "Design Evaluation of Heavy Duty Heat Exchangers for Compact Steam Boilers," J. of the Korean Soc. of Comb., Vol. 18, No. 2, pp. 23-31. https://doi.org/10.15231/jksc.2013.18.2.023
- Wong, J. Y. Q., Sharma, S. and Rangaiah, G. P., 2016, "Design of Shell-and-tube Heat Exchangers for Multiple Objectives using Elitist Non-dominated Sorting Genetic Algorithm with Termination Criteria," Applied Thermal Engineering, Vol. 93, pp. 888-899. https://doi.org/10.1016/j.applthermaleng.2015.10.055