참고문헌
- R. P. Digby and D. E. Packham, "Pretreatment of aluminium : topography, surface chemistry and adhesive bond durability", Int. J. of Adhesion and Adhesives, Vol. 15 Issue 2, pp. 61-71, 1995. https://doi.org/10.1016/0143-7496(95)98739-9
- G. W. Critchlow, D. M. Brewis, D. C. Emmony and C. A. Cottam, "Initial investigation into the effective of CO2-laser treatment of aluminium for adhesive bonding", Int. J. of Adhesion and Adhesives, Vol. 15 Issue 4, pp. 233-236, 1995. https://doi.org/10.1016/0143-7496(96)83704-3
- G. W. Critchlow, C. A. Cottam, D. M. Brewis and D. C. Emmony, "Further studies into the effectiveness of CO2-laser treatment of metals for adhesive bonding", Int. J. of Adhesion and Adhesives, Vol. 17 Issue 2, pp. 143-150, 1997. https://doi.org/10.1016/S0143-7496(96)00037-1
- H. Kleinert, S. Grober, B. Schultrich and P. Siemroth, "Activating adherend surfaces by applying arc-dischage treatment", Int. J. of Adhesion and Adhesives, Vol. 17 Issue 3, pp. 203-206, 1997. https://doi.org/10.1016/S0143-7496(97)00002-X
- D. M. Brewis, G. W. Critchlow and C. A. Curtis, "Cyroblasting as a pretreatment to enhance adhesion to aluminium alloys : an initial study", nt. J. of Adhesion and Adhesives, Vol. 19 Issue 4, pp. 253-256, 1999. https://doi.org/10.1016/S0143-7496(98)00060-8
- F. Elbing, N. Anagreh, L. Dorn and E. Uhlmann, "Dry ice blasting as pretreatment of aluminium surfaces to improve the adhesive strength of aluminim bonding joints", nt. J. of Adhesion and Adhesives, Vol. 23 Issue 1, pp. 69-79, 2003. https://doi.org/10.1016/S0143-7496(02)00083-0
- M. Mellali, A. Grimaud, A. C. Leger, P. Fauchais and J. Lu, "Alumina grit blasting parameters for surface preparation in the plasma spraying blasting operation", J. of Thermal Spraying Technology, Vol. 6, No. 2, pp. 217-227, 1997. https://doi.org/10.1007/s11666-997-0016-6
- J. Day, X. Huang and N. L. Richards, "Examination of a grit-blasting process for thermal spraying using statistical methods", J. of Thermal Spray Technology, Vol. 14, No. 4, pp. 471-479, 2005. https://doi.org/10.1361/105996305X76469
- P. S. Park, M. W. Cho and T. I. Seo, "Mechanical etching of micro pockets by powder blasting", Int. J. of Adv. Manuf. Technology, Vol. 25, pp. 1098-1104, 2005. https://doi.org/10.1007/s00170-003-1941-2
- S. W. Kim, D. H. Wang and W. I. Kim, "A by micro abrasive blaster", J. of KSMPE, Vol 8, No 4, pp.20-27, 2009.
- S. H. Kim, D. H. Wang and S. H. Lee, "The Characteristics of Surface Roughness when Micro Blasting of Titanium Alloy with Spiral Movement", J. of KSMPE, Vol. 11, No, 4, pp.125-130, 2012.
- S. H. Park, J. W. Kim "Modern Design of Experiments Using MINITAB" Min Young Sa, Vol. 5, No.5, 2010.
피인용 문헌
- Analysis of Machined Surface Morphology According to Changes of Surface Condition in Micro Particle Blasting vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.070
- 미세입자 분사가공용 시퀸스 제어가 가능한 2축 스테이지 개발에 관한 연구 vol.19, pp.8, 2020, https://doi.org/10.14775/ksmpe.2020.19.08.081
- 미세입자 분사가공 시 평면과 나선형 곡면 차이에 의한 분사조건 변화 연구 vol.19, pp.9, 2016, https://doi.org/10.14775/ksmpe.2020.19.09.053
- 2축 시퀀스 제어 스테이지와 미세입자 분사장치에 의한 형상 분사가공시 실험계획법에 의한 주요인자 검출 vol.19, pp.11, 2016, https://doi.org/10.14775/ksmpe.2020.19.11.069
- Performance Evaluation of Microchip Removal Device Rotating by Conveyor Belt with Neodymium Permanent Magnet vol.20, pp.1, 2016, https://doi.org/10.14775/ksmpe.2021.20.01.103
- 미세입자 분사가공 시 분사높이 변화에 따른 육각형 가공형상 특성 vol.20, pp.9, 2016, https://doi.org/10.14775/ksmpe.2021.20.09.076