DOI QR코드

DOI QR Code

Laser Surface Treatment of Magnesium Alloy using ZrO2 for Corrosion Resistance

내식성 향상을 위한 마그네슘합금의 ZrO2 적용 레이저 표면 처리

  • Yoon, Sangwoo (Department of Mechanical Engineering, Graduate School, Seoul National University of Science and Technology) ;
  • Kang, Dongchan (Department of Mechanical Engineering, Graduate School, Seoul National University of Science and Technology) ;
  • Kim, Joohan (Department of Mechanical Engineering, Graduate School, Seoul National University of Science and Technology)
  • 윤상우 (서울과학기술대학교 일반대학원 기계공학과) ;
  • 강동찬 (서울과학기술대학교 일반대학원 기계공학과) ;
  • 김주한 (서울과학기술대학교 일반대학원 기계공학과)
  • Received : 2016.03.30
  • Accepted : 2016.06.16
  • Published : 2016.08.31

Abstract

The laser surface treatment of magnesium alloy was studied. $ZrO_2$ was used as sintering ceramics, and its corrosion resistance was verified. Appropriate laser parameters were proposed for homogeneous solidification of the sintered layer. The chemical compositions of the sintered layer were analyzed with laser-induced breakdown spectroscopy. $Na_2SO_4$ was used for a corrosion test, and the resistance of the sintered sample was confirmed. The microstructures of the sintered parts were also examined. The solidified grains on the top sintered surface were observed; however, reasonable fusion was obtained at the interface between the baseline and the ceramics. Laser surface treatment using $ZrO_2$ on magnesium alloy showed an improvement in corrosion resistance.

Keywords

References

  1. Zhuang, J. J., Guo, Y. Q., Xiang, N., Xiong, Y., Hu, Q., and Song, R. G., "A study on microstructure and corrosion resistance of $ZrO_2$-containing PEO coatings formed on AZ31 Mg alloy in phosphate-based electrolyte," Applied Surface Science, Vol. 357, pp. 1463-1471, 2015. https://doi.org/10.1016/j.apsusc.2015.10.025
  2. Qadri, S. B., Horwitz, J. S., Chrisey, D. B., Donovan, E. P., and Skelton, E. F., "Pulsed laser deposition and characterization of $ZrO_2-AL_2O_3$ film," Surface and Coatings Technology, Vol. 86, pp. 149-152, 1996.
  3. El-Lateef, H. M. A., and Khalaf, M. M., "Corrosion resistance of $ZrO_2-TiO_2$ nanocomposite multilayer thin films coated on carbon steel in hydrochloric acid solution," Materials Characterization, Vol. 108, pp. 29-41, 2015. https://doi.org/10.1016/j.matchar.2015.08.010
  4. Pei, Y. T., Ouyang, J. H., and Lei, T. C., "Laser cladding of $ZrO_2$-(Ni alloy) composite coating," Surface and Coatings Technology, Vol. 81, No. 131-135, 1996. https://doi.org/10.1016/0257-8972(95)02483-2
  5. Choi, H., Jang, J., An, E., and Kim, K. H., "MicroStructure, mechanical, oxidation and corrosion properties of Zr-Al-N coatings synthesized by the hybrid coating system," Journal of The Korean Institute of Surface Engineering, Vol. 46, pp. 242-247, 2013. https://doi.org/10.5695/JKISE.2013.46.6.242
  6. Ha, S. H., Lee, D. W., Rehman, A. U., Wasy, A., and Song, J. I., "Characterization of fracture toughness and wear behavior for plasma ceramic coated materials," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 4, pp. 123-130, 2013.
  7. Kim. H., "Zrconia coating of SiC whiskers using the aqueous solutions of $Zr(SO_4)_2$," Journal of the Korean Ceramic Society, Vol. 33, No. 12, pp. 1380-1386, 1996.
  8. Li, H., Liang, K., Mei, L., Gu, S., and Wang, S., "Corrosion protection of mild steel by zirconia sol-gell coatings," Journal of Materials Science Letters, Vol. 20, pp. 1081-1083, 2001. https://doi.org/10.1023/A:1010918224936
  9. Seo, W.C., Jo, C.J., Yoon, Y.S., and Hwang, W.S., "Crystallization of yttria-stabilized-zirconia film by sol-gel process," Journal of the Korean Ceramic Society, Vol. 30, No. 3, pp. 183-190, 1997.
  10. Khor, K. A., and Jana, S., "Pulsed laser processing of plasma sprayed thermal barrier coatings," Journal of Materials Processing Technology, Vol. 66, No. 1, pp. 4-8, 1997. https://doi.org/10.1016/S0924-0136(96)02418-1
  11. Kreutz, E. W., Lemmer, O., Wesner, D. A., Alunovic, M., Erkens, G., Leyendecker, T., and Voss, A., "Electron and laser radiation as sources of zirconia film deposition," Surface and Coatings Technology, Vol. 74, pp. 1005-1011, 1995.
  12. Song, B., Dong, S., Zhang, B., Liao, H., and Coddet, C., "Effects of Processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V," Materials and Design, Vol. 35, pp. 120-125, 2012. https://doi.org/10.1016/j.matdes.2011.09.051
  13. Joo, B. D., Jang, J. H., Yim, H. S., Son, Y. M., and Moon, Y. H., "Effect of process parameters on forming characteristics of selective laser sintered Fe-Ni-Cr powder," Transactions of Materials Processing, Vol. 18, No. 3, pp. 262-267, 2009. https://doi.org/10.5228/KSPP.2009.18.3.262
  14. Shishkovsky, I., Yadroitsev, I., Bertrand, P., and Smurov, I., "Alumina-zirconium ceramics synthesis by selective laser sintering/melting," Applied Surface Science, Vol. 254, pp. 966-970, 2007. https://doi.org/10.1016/j.apsusc.2007.09.001
  15. Rho, J. W., Kim, J., and Lee, C., "An overview of selective laser sintering," Journal of the Korean Welding and Joining Society, Vol. 26, No. 4, pp. 344-347, 2008.
  16. Lee, J. Y., Cho, Y. T., and Jung, Y. G., "Laser sintering Characteristics of Thin Metal Coated Transparent Substrate according to the Irradiation Direction," Proceeding of the KSMPE Autumn Conference, 157, 2014.
  17. Kang, B., Park, J., and Yang, M., "Laser Sintering of Copper Nanoparticles using Mild absorption," Proceeding of the KSMPE Spring Conference, 25, 2015.
  18. Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., and Smurov, I., "Ceramic components manufacturing by selective laser sintering," Applied Surface Science, Vol. 254, pp. 989-992, 2007. https://doi.org/10.1016/j.apsusc.2007.08.085
  19. Bae, S. W., Kim, D. S., Choi, K. H., and Yoo, S. Y. , "An experimental study on mechanical characteristics along a laser scan path in the SLS process," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 8, pp. 29-34, 2009.
  20. Jeon, B. C. and Kim, J. D., "Selective laser sintering by $CO_2$ laser," Journal of the Korean Society of Precision Engineering, Vol. 15, No. 7, 18-25, 1998.
  21. Song, K.Y., Baek, Y.J., Jo, H.T., Kim, D.S., and An, Y.J., "Development of rapid prototyping system using SLS process," Proceeding of the KSMPE Spring Conference, pp. 132-137, 2005.
  22. Bae, S.W., Kim, D.S., Kim, H.I., Kim, C.H., Cho, J.D. and Choi, B.O., "A study on polyamide-6 sintering and effect on SLS process," Proceeding of the KSMPE Spring Conference, pp. 198-203, 2006.
  23. Lee, H. S., Na, Y. M., Kang, T. H., Park, J. K., and Park, T. G., "Design and Analysis of Aluminum Melting Machine in Fused Deposition Modeling Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 62-72, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.062
  24. Kim, K. W., Kim, S. H., and Cho, H. Y., "Analytic study on pulsed-laser polishing on surface of NAK80 die steel," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 136-141, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.136
  25. Ko. S.H., "Status of research on selective laser sintering of nanomaterials for flexible electronics fabrication," Transactions of the Korean Society of Mechanical Engineers B, Vol. 35, No. 5, pp. 533-538, 2011. https://doi.org/10.3795/KSME-B.2011.35.5.533
  26. Yang, S. Y., Choi, S. D., Choi, M. S., and Jun, J. M., "Characteristics of Surface Hardened Press Die Materials by CO2 Laser Beam Irradiation," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 31-37, 2011.

Cited by

  1. A Study on Surface Characteristics of High Tensile Brass with Molybdenum Flame Spray Treatment vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.038
  2. CO2 Laser Drilling Processing of the Cover Glass using the Taguchi Method vol.37, pp.3, 2016, https://doi.org/10.5781/jwj.2019.37.3.1
  3. 마그네슘 합금 표면의 지르코니아 분말 레이저 소결과정에서 조사 패턴이 접합 계면 품질에 미치는 영향 vol.20, pp.2, 2021, https://doi.org/10.14775/ksmpe.2021.20.02.051