참고문헌
- 건축물 하중기준 및 해설, 대한건축학회, 2000.
- 국토해양부고시 건축구조기준, 대한건축학회, 2009.
피인용 문헌
- 2017년도 온실설계기준(안)에 따른 제주지역 비닐하우스의 내재해성 평가 vol.22, pp.1, 2016, https://doi.org/10.14577/kirua.2020.22.1.13
DOI QR Code
For the reason of economy, farmers and structural engineers prefer the vinyl house frame members that have the lightest cross sections. Therefore, in order to reach this aim, rod bracing system is the best method for multiple vinyl house frames. In this study, wire rods (tension members) are used to be bracing members in multiple vinyl house frames. The effects of additional wire rods in the frames are investigated by the variations of the bending moments, axial forces, displacements and combined stresses in the main frames that are reinforced by different shapes of rod bracing system. Vinyl house frames are usually made by steel pipe members and collapsed by the excessive wind and snow loads. Two kinds of bracing models are used for wind and snow loads separately in this study. The effective bracing models for each load are finally figured out.