참고문헌
- ASTM, F2792-12a, Standard Terminology for Additive Manufacturing Technologies
- Terner, Mathieu. "The Current State, Outcome and Vision of Additive Manufacturing." Journal of Welding and Joining (Vol. 33, No. 6) (2015), 12 https://doi.org/10.5781/JWJ.2015.33.3.12
- Ding, Donghong, et al., Wire-feed additive manufacturing of metal components, technologies, developments and future interests. The International Journal of Advanced Manufacturing Technology 81.1-4 (2015), 465- 481 https://doi.org/10.1007/s00170-015-7077-3
- Craeghs, Tom, et al., Online quality control of selective laser melting. Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX. (2011)
- Berumen, Sebastian, et al., Quality control of laser-and powder bed-based Additive Manufacturing (AM) technologies. Physics procedia, 5(2010), 617-622 https://doi.org/10.1016/j.phpro.2010.08.089
- Gharbi, Myriam, et al., Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy. Journal of Materials Processing Technology 213(5) (2013), 791-800 https://doi.org/10.1016/j.jmatprotec.2012.11.015
- Kim, Woosung, et al. "Effects and Application Cases of Injection Molds by using DED type Additive Manufacturing Process." Journal of Welding and Joining 32.4 (2014), 348-352
- Watson, J. K., et al., Development of a prototype low-voltage electron beam freeform fabrication system. (2002)
- Taminger, Karen, and Robert A. Hafley, Electron beam freeform fabrication, a rapid metal deposition process, (2003)
- Taminger, Karen M., and Robert A. Hafley, Electron beam freeform fabrication for cost effective near-net shape manufacturing, (2006)
- Stecker, S., et al., Advanced Electron Beam Free Form Fabrication Methods & Technology, Session 2 (2006), 12
- Seufzer, W. J., and K. M. Taminger, Control methods for the electron beam free form fabrication process, NATIONAL AERONAUTICS AND SPACE ADMIN LANGLEY RESEARCH CENTER HAMPTON VA, (2007)
- Mitzner, Scott, et al., Grain refinement of freeform fabricated Ti-6Al-4V alloy using beam/arc modulation, (2012)
- Fox, Jason, and Jack Beuth, Process mapping of transient melt pool response in wire feed E-beam additive manufacturing of Ti-6Al-4V, Solid Freeform Fabrication Symposium, Austin, TX, (2013)
- Gockel, Joy, Jack Beuth, and Karen Taminger, Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of Ti-6Al-4V, Additive Manufacturing, 1 (2014), 119-126
- Dickens, P. M., et al., Rapid prototyping using 3-D welding, Proc. Solid Freeform Fabrication Symp, (1992)
- Everton, Sarah K., et al., Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing, Materials & Design, (2016)
- Zhang, Yu Ming, et al., Automated system for welding-based rapid prototyping, Mechatronics 12(1) (2002), 37-53 https://doi.org/10.1016/S0957-4158(00)00064-7
- Zhang, YuMing, et al., Weld deposition-based rapid prototyping, a preliminary study, Journal of Materials Processing Technology 135(2) (2003), 347-357 https://doi.org/10.1016/S0924-0136(02)00867-1
- Almeida, P. S., and S. Williams, Innovative process model of Ti-6Al-4V additive layer manufacturing using cold metal transfer (CMT), Proceedings of the Twenty-first Annual International Solid Freeform Fabrication Symposium, University of Texas at Austin, Austin, TX, USA. (2010)
- Ding, J., et al., Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts, Computational Materials Science 50(12) (2011), 3315-3322 https://doi.org/10.1016/j.commatsci.2011.06.023
- Martina, F., et al., Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti- 6Al-4V, Journal of Materials Processing Technology 212(6) (2012), 1377-1386 https://doi.org/10.1016/j.jmatprotec.2012.02.002
- Zhai, Yun, Early cost estimation for additive manufacture, (2012)
- Adebayo, Adeyinka, Characterisation of integrated WAAM and machining processes, (2013)
- Bandari, Yashwanth K., et al., ADDITIVE MANUFACTURE OF LARGE STRUCTURES, ROBOTIC OR CNC SYSTEMS?
- Karunakaran, K. P., A. Sreenathbabu, and Vishal Pushpa, Hybrid layered manufacturing, direct rapid metal tool-making process, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture 218(12) (2004), 1657-1665 https://doi.org/10.1177/095440540421801202
- Akula, Sreenathbabu, and K. P. Karunakaran, Hybrid adaptive layer manufacturing, An Intelligent art of direct metal rapid tooling process, Robotics and Computer-I ntegrated Manufacturing, 22(2) (2006), 113-123 https://doi.org/10.1016/j.rcim.2005.02.006
- Suryakumar, S., et al., Weld bead modeling and process optimization in hybrid layered manufacturing, Computer-Aided Design, 43(4) (2011), 331-344 https://doi.org/10.1016/j.cad.2011.01.006
- Zhao, Huihui, et al., Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototyping, Journal of Materials Processing Technology, 212(1) (2012), 276-285 https://doi.org/10.1016/j.jmatprotec.2011.09.012
- Xiong, Jun, et al., Vision-sensing and bead width control of a single-bead multi-layer part, material and energy savings in GMAW-based rapid manufacturing, Journal of Cleaner Production, 41 (2013), 82-88 https://doi.org/10.1016/j.jclepro.2012.10.009
- Xiong, Jun, et al., Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing, Robotics and Computer-Integrated Manufacturing, 29(2) (2013), 417- 423 https://doi.org/10.1016/j.rcim.2012.09.011
- Xiong, Jun, et al., Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing, Robotics and Computer-Integrated Manufacturing, 29(2) (2013), 417-423 https://doi.org/10.1016/j.rcim.2012.09.011
- Xiong, Jun, et al., Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis, Journal of Intelligent Manufacturing, 25(1) (2014), 157-163 https://doi.org/10.1007/s10845-012-0682-1
- Aiyiti, Wurikaixi, et al., Investigation of the overlapping parameters of MPAW-based rapid prototyping, Rapid Prototyping Journal, 12(3) (2006), 165-172 https://doi.org/10.1108/13552540610670744
- Lin, J. J., et al., Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing, Materials & Design, 102 (2016), 30-40 https://doi.org/10.1016/j.matdes.2016.04.018
- Katou, M., et al., Freeform fabrication of titanium metal and intermetallic alloys by three-dimensional micro welding, Materials & design, 28(7) (2007), 2093-2098 https://doi.org/10.1016/j.matdes.2006.05.024
- Horii, Toshihide, Soshu Kirihara, and Yoshinari Miyamoto, Freeform fabrication of Ti-Al alloys by 3D micro-welding, Intermetallics, 16(11) (2008), 1245-1249 https://doi.org/10.1016/j.intermet.2008.07.009
- Horii, Toshihide, Soshu Kirihara, and Yoshinari Miyamoto, Freeform fabrication of superalloy objects by 3D micro welding, Materials & Design, 30(4) (2009), 1093-1097 https://doi.org/10.1016/j.matdes.2008.06.033
- Keizo, TANAKA, et al., Strength of manufacturing object made by direct metal lamination using arc discharge, The japan society of mechanical engineers, 79(800) (2013), 1168-1178 https://doi.org/10.1299/kikaic.79.1168
- Brandl, Erhard, et al., Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire, Materials & Design, 32(10) (2011), 4665-4675 https://doi.org/10.1016/j.matdes.2011.06.062
- Brandl, Erhard, et al., Deposition of Ti-6Al-4V using laser and wire, part I, Microstructural properties of single beads, Surface and Coatings Technology, 206(6) (2011), 1120-1129 https://doi.org/10.1016/j.surfcoat.2011.07.095
- Brandl, E., et al., Additive manufactured Ti-6Al-4V using welding wire, comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications, Physics Procedia, 5 (2010), 595-606 https://doi.org/10.1016/j.phpro.2010.08.087
- Levy, Gideon N., Ralf Schindel, and Jean-Pierre Kruth, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives, CIRP Annals-Manufacturing Technology, 52(2) (2003), 589-609 https://doi.org/10.1016/S0007-8506(07)60206-6
- Baufeld, Bernd, Erhard Brandl, and Omer Van der Biest, Wire based additive layer manufacturing, comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition, Journal of Materials Processing Technology, 211(6) (2011), 1146-1158 https://doi.org/10.1016/j.jmatprotec.2011.01.018
- Baufeld, Bernd, and Omer Van der Biest, Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition, Science and technology of advanced materials, (2016)
- Ding, Donghong, et al., A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM), Robotics and Computer-Integrated Manufacturing, 31 (2015), 101-110 https://doi.org/10.1016/j.rcim.2014.08.008
- Ma, Yan, et al., The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding, Materials Science and Engineering, A 631 (2015), 230-240 https://doi.org/10.1016/j.msea.2015.02.051
- Ma, Yan, et al., Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding, Additive Manufacturing, 8 (2015), 71-77 https://doi.org/10.1016/j.addma.2015.08.001
- Ding, Donghong, et al, Wire-feed additive manufacturing of metal components, technologies, developments and future interests, The International Journal of Advanced Manufacturing Technology, 81(1-4) (2015), 465-481 https://doi.org/10.1007/s00170-015-7077-3
- Ding, Donghong, et al., Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part, Computer-Aided Design, (2016)
- Ding, Donghong, et al., Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing, Robotics and Computer-Integrated Manufacturing, 39 (2016), 32-42 https://doi.org/10.1016/j.rcim.2015.12.004
- Song, Yong-Ak, et al., 3D welding and milling, Part I-a direct approach for freeform fabrication of metallic prototypes, International Journal of Machine Tools and Manufacture, 45(9) (2005), 1057-1062 https://doi.org/10.1016/j.ijmachtools.2004.11.021
- Song, Yong-Ak, Sehyung Park, and Soo-Won Chae, 3D welding and milling, part II-optimization of the 3D welding process using an experimental design approach, International Journal of Machine Tools and Manufacture, 45(9) (2005), 1063-1069. https://doi.org/10.1016/j.ijmachtools.2004.11.022
- Sang-Myung Cho, et al., Filler metal shpae for welding, Korea patent, 1016440190000 (2015)
- Sang-Myung Cho, et al., Filler metal shpae for welding, Korea patent, 1016273680000 (2016)
- Sang-Myung Cho, et al., Filler metal shpae for TIG welding, Korea patent, 1016216960000 (2016)
- Jun, Jae-Ho, Sung-Ryul Kim, and Sang-Myung Cho, A Study on Productivity Improvement in Narrow Gap TIG Welding, J. of Welding and Joining, 34(1) (2016), 68-74 (in Korean) https://doi.org/10.5781/JWJ.2016.34.1.68
- Jae-Gyu Byun, Jae-Ho Jun, Song-Yi Park, Sang-Jun Lee, Dong-Soo Oh, Sang-Myun Cho, Study of Mechanical Property of Metal 3D Printing by Super-TIG Welding, Abstracts of KWJS, 62(2015), 86 (in Korean)
- Jae-Gyu Byun, Jae-Ho Jun, Sang-Jun Lee, Dong-Soo Oh, Sang-Myung Cho, Development of The Process to Improve Degree of Freedom in STS316L Metal 3D Printing by Super-TIG Welding, Abstracts KWJS, 63 (2015), 62 (in Korean)
- Sang-Jun Lee, Jae-Gyu Byun, Sang-Myung Cho, Development of Additive Process on Cylindrical Parts by Super-TIG Metal 3D Printing, Abstracts o the KWJS, 64 (2016), 141 (in Korean)
- Jae-Gyu Byun, Sang-Jun Lee, Yung-Gyu Lee, Soo-Yoong Park, Young-Tae Cho, Sang-Myung Cho, Development of The Metal 3D Printing Equipment by Super-TIG Welding, Abstracts of KWJS, 64(2016), 148