DOI QR코드

DOI QR Code

Optimum design of steel floor system: effect of floor division number, deck thickness and castellated beams

  • Kaveh, A. (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology) ;
  • Ghafari, M.H. (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology)
  • 투고 : 2015.11.26
  • 심사 : 2016.06.30
  • 발행 : 2016.09.10

초록

Decks, interior beams, edge beams and girders are the parts of a steel floor system. If the deck is optimized without considering beam optimization, finding best result is simple. However, a deck with higher cost may increase the composite action of the beams and decrease the beam cost reducing the total cost. Also different number of floor divisions can improve the total floor cost. Increasing beam capacity by using castellated beams is other efficient method to save the costs. In this study, floor optimization is performed and these three issues are discussed. Floor division number and deck sections are some of the variables. Also for each beam, profile section of the beam, beam cutting depth, cutting angle, spacing between holes and number of filled holes at the ends of castellated beams are other variables. Constraints include the application of stress, stability, deflection and vibration limitations according to the load and resistance factor (LRFD) design. Objective function is the total cost of the floor consisting of the steel profile cost, cutting and welding cost, concrete cost, steel deck cost, shear stud cost and construction costs. Optimization is performed by enhanced colliding body optimization (ECBO), Results show that using castellated beams, selecting a deck with higher price and considering different number of floor divisions can decrease the total cost of the floor.

키워드

과제정보

연구 과제 주관 기관 : Iran National Science Foundation

참고문헌

  1. Adeli, H. and Kim, H. (2001), "Cost optimization of composite floors using neural dynamics model", Commn. Numer. Meth. Eng., 17(11), 771-787. https://doi.org/10.1002/cnm.448
  2. AISC (2010), Specification for Structural Steel Buildings (ANSI/AISC 360-10), American Institute of Steel Construction, Chigago, USA.
  3. ASCE (1994), Minimum design loads for buildings and other structures, Vol. 7, American Society of Civil Engineers, Chigago, USA.
  4. Benitez, M.A., Darwin, D. and Donahey, R.C. (1998), "Deflections of composite beams with web openings", J. Struct. Eng., ASCE, 124(10), 1139-1147. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1139)
  5. CSA, C. (2009), CSA-S16-09: design of steel structures, Canadian Standards Association, Mississauga, Ontario, Canada.
  6. Dorigo, M., Maniezzo, V. and Colorni, A. (1996), "Ant system: optimization by a colony of cooperating agents", IEEE Tran. Syst. Man, Cyber., Part B, 26(1), 29-41. https://doi.org/10.1109/3477.484436
  7. Eberhart, R.C. and Kennedy, J. (1995), "A new optimizer using particle swarm theory", Proceedings of the Sixth International Symposium on Micro Machine and Human Science.
  8. Erol, O.K. and Eksin, I. (2006), "A new optimization method: big bang-big crunch", Adv. Eng. Softw., 37(2), 106-111. https://doi.org/10.1016/j.advengsoft.2005.04.005
  9. Goncalves, M.S., Lopez, R.H. and Miguel, L.F.F. (2015), "Search group algorithm: a new metaheuristic method for the optimization of truss structures", Comput. Struct., 153, 165-184. https://doi.org/10.1016/j.compstruc.2015.03.003
  10. Kaveh, A. (2014), Advances in metaheuristic algorithms for optimal design of structures, Springer, Switzerland.
  11. Kaveh, A. and Abadi, A.S.M. (2010), "Cost optimization of a composite floor system using an improved harmony search algorithm", J. Constr. Steel Res., 66(5), 664-669. https://doi.org/10.1016/j.jcsr.2010.01.009
  12. Kaveh, A. and Ahangaran, M. (2012), "Discrete cost optimization of composite floor system using social harmony search model", Appl. Soft. Comput., 12(1), 372-381. https://doi.org/10.1016/j.asoc.2011.08.035
  13. Kaveh, A. and Bakhshpoori, T. (2016), "Water evaporation optimization: a novel physically inspired optimization algorithm", Comput. Struct., 167, 69-85. https://doi.org/10.1016/j.compstruc.2016.01.008
  14. Kaveh, A. Bakhshpoori, T. and Afshari, E. (2015), "Hybrid PSO and SSO algorithm for truss layout and size optimization considering dynamic constraints", Struct. Eng. Mech., 54(3), 453-474. https://doi.org/10.12989/sem.2015.54.3.453
  15. Kaveh, A. and Farhoudi, N. (2013), "A new optimization method: Dolphin echolocation", Adv. Eng. Softw., 59, 53-70. https://doi.org/10.1016/j.advengsoft.2013.03.004
  16. Kaveh, A. and Ilchi Ghazaan, M. (2014), "Enhanced colliding bodies optimization for design problems with continuous and discrete variables", Adv. Eng. Softw., 77, 66-75. https://doi.org/10.1016/j.advengsoft.2014.08.003
  17. Kaveh, A. and Khayatazad, M. (2012), "A new meta-heuristic method: ray optimization", Comput. Struct., 112, 283-294.
  18. Kaveh, A. and Mahdavi V.R. (2014), "Colliding bodies optimization: a novel meta-heuristic method", Comput. Struct., 139, 18-27. https://doi.org/10.1016/j.compstruc.2014.04.005
  19. Kaveh, A. and Massoudi, M. (2012), "Cost optimization of a composite floor system using ant colony system", Iran. J. Sci. Technol., Tran. Civil Eng., 36(C2), 139-148.
  20. Kaveh, A. and Talatahari, S. (2010), "A novel heuristic optimization method: charged system search", Acta Mech., 213(3-4), 267-289. https://doi.org/10.1007/s00707-009-0270-4
  21. Kaveh, A. and Zolghadr, A. (2014), "A new PSRO algorithm for frequency constraint truss shape and size optimization", Struct. Eng. Mech., 52(3), 445-468. https://doi.org/10.12989/sem.2014.52.3.445
  22. Kerdal, D. and Nethercot, D. (1984), "Failure modes for castellated beams", J. Constrt. Steel Res., 4(4), 295-315. https://doi.org/10.1016/0143-974X(84)90004-X
  23. Klansek, U. and Kravanja, S. (2007), "Cost optimization of composite I beam floor system", Am. J. Appl. Sci., 5(1), 7-17. https://doi.org/10.3844/ajassp.2008.7.17
  24. Mirjalili, S. (2015), "The ant lion optimizer", Adv. Eng. Softw., 83, 80-98. https://doi.org/10.1016/j.advengsoft.2015.01.010
  25. Mirjalili, S. and Lewis, A. (2016), "The whale optimization algorithm", Adv. Eng. Softw., 95, 51-67. https://doi.org/10.1016/j.advengsoft.2016.01.008
  26. Morton, S. and Webber, J. (1994), "Optimal design of a composite I-beam", Compos. Struct., 28(2), 149-168. https://doi.org/10.1016/0263-8223(94)90045-0
  27. Murray, T.M., Allen, D.E. and Ungar, E.E. (2003), Floor vibrations due to human activity, American Institute of Steel Construction.
  28. Naeim, F. (1991), Design practice to prevent floor vibrations, Steel Committee of California.
  29. Platt, B.S. and Mtenga, P.V. (2006), "Parametric optimization of steel floor system cost using evolver", Comput. Aid. Optim. Des. Eng., 91, 119-128,
  30. Poitras, G., Lefrancois, G. and Cormier, G. (2011), "Optimization of steel floor systems using particle swarm optimization", J. Constr. Steel Res., 67(8), 1225-1231. https://doi.org/10.1016/j.jcsr.2011.02.016
  31. Roll, F. (1971), "Effects of differential shrinkage and creep on a composite steel-concrete structure", ACI Special Publication, 27, 187-214.
  32. Sadollah, A., Eskandar, H., Bahreininejad, A. and Kim, J.H. (2015), "Water cycle, mine blast and improved mine blast algorithms for discrete sizing optimization of truss structures", Comput. Struct., 149, 1-16. https://doi.org/10.1016/j.compstruc.2014.12.003
  33. Saka, M.P. and Geem, Z.W. (2013), "Mathematical and metaheuristic applications in design optimization of steel frame structures: an extensive review", Math. Prob. Eng., 2013, Article ID 271031.
  34. Senouci, A.B. and Al-Ansari, M.S. (2009), "Cost optimization of composite beams using genetic algorithms", Adv. Eng. Softw., 40(11), 1112-1118. https://doi.org/10.1016/j.advengsoft.2009.06.001

피인용 문헌

  1. Metamodel-based design optimization of structural one-way slabs based on deep learning neural networks to reduce environmental impact vol.155, 2018, https://doi.org/10.1016/j.engstruct.2017.11.005
  2. Cost Optimization of Composite Floor Systems with Castellated Steel Beams vol.24, pp.1, 2019, https://doi.org/10.1061/(ASCE)SC.1943-5576.0000409
  3. MINLP optimization of a composite I beam floor system vol.22, pp.5, 2016, https://doi.org/10.12989/scs.2016.22.5.1163
  4. A new meta-heuristic optimization algorithm using star graph vol.20, pp.1, 2016, https://doi.org/10.12989/sss.2017.20.1.099
  5. Simplified method for prediction of elastic-plastic buckling strength of web-post panels in castellated steel beams vol.25, pp.6, 2017, https://doi.org/10.12989/scs.2017.25.6.671
  6. Castellated and common cruciform steel columns under axial and lateral cyclic loading vol.20, pp.1, 2016, https://doi.org/10.1007/s42107-018-0094-4