DOI QR코드

DOI QR Code

Percolation threshold and piezoresistive response of multi-wall carbon nanotube/cement composites

  • Nam, I.W. (Infrastructure Research Center, K-water Institute) ;
  • Souri, H. (Center of Advanced Composite Materials (CACM), Department of Mechanical Engineering, The University of Auckland) ;
  • Lee, H.K. (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST))
  • 투고 : 2014.12.31
  • 심사 : 2016.04.08
  • 발행 : 2016.08.25

초록

The present work aims to develop piezoresistive sensors of excellent piezoresistive response attributable to change in nanoscale structures of multi-wall carbon nanotube (MWNT) embedded in cement. MWNT was distributed in a cement matrix by means of polymer wrapping method in tandem with the ultrasonication process. DC conductivity of the prepared samples exhibited the electrical percolation behavior and therefore the dispersion method adopted in this study was deemed effective. The integrity of piezoresistive response of the sensors was assessed in terms of stability, the maximum electrical resistance change rate, and sensitivity. A composite sensor with MWNT 0.2 wt.% showed the lowest stability and sensitivity, while the maximum electrical resistance change rate exhibited by this sample was the highest (96 %) among others and even higher than those found in the literature. This observation was presumably attributed by the percolation threshold and the tunneling effect. As a result of the MWNT content (0.2 wt.%) of the sensor being near the percolation threshold (0.25 wt.%), MWNTs were close to each other to trigger tunneling in response of external loading. The sensor with MWNT 0.2 wt.% was able to maintain the repeatable sensing capability while sustaining a vehicular loading on road, demonstrating the feasibility in traffic flow sensing application.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF), Ministry of Land, Infrastructure and Transport (MOLIT)

참고문헌

  1. ASTM (2012), ASTM C109 - Standard test method for compressive strength of hydraulic cement mortars, West Conshohocken.
  2. ASTM (2013), ASTM C642 - Standard test method for density, absorption, and voids in hardened concrete, West Conshohocken.
  3. Azhari, F. and Banthia, N. (2012), "Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing", Cement Concrete Comp., 34, 866-873. https://doi.org/10.1016/j.cemconcomp.2012.04.007
  4. Banthia, N., Djeridane, S. and Pigeon, M. (1992), "Electrical resistivity of carbon and steel micro-fiber reinforced cements", Cement Concrete Res., 22, 804-814. https://doi.org/10.1016/0008-8846(92)90104-4
  5. Cao, J. and Chung, D.D.L. (2004), "Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement", Cement Concrete Res., 34, 481-485. https://doi.org/10.1016/j.cemconres.2003.09.003
  6. Chung, D.D.L. (2012), "Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing", Carbon, 50(9), 3342-3353. https://doi.org/10.1016/j.carbon.2012.01.031
  7. Han, B., Yu, X. and Kwon, E. (2009), "A self-sensing carbon nanotube/cement composite for traffic monitoring", Nanotechnology, 20, 445501(5pages) https://doi.org/10.1088/0957-4484/20/44/445501
  8. Han, B., Yu, X. and Ou, J. (2010), "Effect of water content on the piezoresistivity of MWNT/cement composites", J. Mater. Sci., 45(14), 3714-3719. https://doi.org/10.1007/s10853-010-4414-7
  9. Hu, N., Karube, Y., Yan, C., Masuda, Z. and Fukunaga, H. (2008), "Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor", Acta Mater., 56(13), 2929-2936. https://doi.org/10.1016/j.actamat.2008.02.030
  10. Jeon, J.H. (2012), "An experimental study on electrical resistance behavior of carbon nanotube/cement composite", Master thesis, Korea Advanced Institute of Science and Technology, Dae-jeon.
  11. Kakooei, S., Akil, H.M., Jamshidi, M. and Rouhi, J. (2012), "The effects of polypropylene fibers on the properties of reinforced concrete structures", Constr. Build. Mater., 27(1), 73-77. https://doi.org/10.1016/j.conbuildmat.2011.08.015
  12. Kang, I., Schulz, M.J., Kim, J.H., Shanov, V. and Shi, D. (2006), "A carbon nanotube strain sensor for structural health monitoring", Smart Mater. Struct., 15(3), 737-748. https://doi.org/10.1088/0964-1726/15/3/009
  13. Kendall, K., Howard, A.J., Birchall, J.D., Pratt, P.L., Proctor, B.A. and Jefferis, S.A. (1983), "The relation between porosity, microstructure and strength, and the approach to advanced cement-based materials", Philos. T. R. Soc. A, 310(1511), 139-153. https://doi.org/10.1098/rsta.1983.0073
  14. Kim, H.K., Nam, I.W. and Lee, H.K. (2014a), "Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume", Compos. Struct., 107, 60-69. https://doi.org/10.1016/j.compstruct.2013.07.042
  15. Kim, H.K., Park, I.S. and Lee, H.K. (2014b), "Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio", Compos. Struct., 116, 713-719. https://doi.org/10.1016/j.compstruct.2014.06.007
  16. Kim, Y.J., Shin, T.S., Choi, H.D., Kwon, J.H., Chung, Y.C. and Yoon, H.G. (2005), "Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites", Carbon, 43(1), 23-30. https://doi.org/10.1016/j.carbon.2004.08.015
  17. Li, C. and Chou, T.W. (2008), "Modeling of damage sensing in fiber composites using carbon nanotube networks", Compos. Sci. Technol., 68(15-16), 3373-3379. https://doi.org/10.1016/j.compscitech.2008.09.025
  18. Li, G.Y., Wang, P.M. and Zhao, X. (2007), "Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites", Cement Concrete Comp., 29, 377-382. https://doi.org/10.1016/j.cemconcomp.2006.12.011
  19. Li, H., Xiao, H. and Ou, J. (2004), "A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials", Cement Concrete Res., 34, 435-438. https://doi.org/10.1016/j.cemconres.2003.08.025
  20. Li, H., Xiao, H. and Ou, J. (2006), "Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites", Cement Concrete Comp., 28(9), 824-828. https://doi.org/10.1016/j.cemconcomp.2006.05.004
  21. Lu, K.L., Lago, R.M., Chen, Y.K., Green, M.L.H., Harris, P.J.F. and Tsang, S.C. (1996), "Mechanical damage of carbon nanotubes by ultrasound", Carbon, 34(6), 814-816. https://doi.org/10.1016/0008-6223(96)89470-X
  22. Luo, J., Duan, Z., Zhao, T. and Li, Q. (2011), "Hybrid effect of carbon fiber on piezoresistivity of carbon nanotube cement-based composite", Adv. Mater. Res., 143-144, 639-643.
  23. Lutwyche, M.I. and Wada, Y. (1995) "Observation of a vacuum tunnel gap in a transmission electron microscope using a micromechanical tunneling microscope", Appl. Phys. Lett., 66(21), 2807-2809. https://doi.org/10.1063/1.113482
  24. Nam, I.W., Lee, H.K., Sim, J.B. and Choi, S.M. (2012), "Electromagnetic characteristics of cement matrix materials with carbon nanotubes", ACI Mater. J., 109(3), 363-370.
  25. Park, J.M., Kim, P.G., Jang, J.H., Wang, Z., Kim, J.W., Lee, W.I., Park, J.G. and DeVries, K.L. (2008), "Self-sensing and dispersive evaluation of single carbon fiber/carbon nanotube (CNT)-epoxy composites using electro-micromechanical technique and nondestructive acoustic emission", Compos. Part B-Eng., 39, 1170-1182. https://doi.org/10.1016/j.compositesb.2008.03.004
  26. Sanches, F. and Ince, C. (2009), "Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites", Compos. Sci. Technol., 69, 1310-1318. https://doi.org/10.1016/j.compscitech.2009.03.006
  27. SEMI (2005), SEMI MF 43 - Standard test methods for resistivity of semiconductor materials, San Jose.
  28. Souri, H., Nam, I.W. and Lee, H.K. (2015), "Electrical properties and piezoresistive evaluation of polyurethane-based composites with carbon nano-materials", Compos. Sci. Technol., 121, 41-48. https://doi.org/10.1016/j.compscitech.2015.11.003
  29. Wen, W. and Chung, D.D.L. (2001), "Carbon fiber-reinforced cement as a strain-sensing coating", Cement Concrete Res., 31, 665-667. https://doi.org/10.1016/S0008-8846(01)00474-4
  30. Wood, J.R., Zhao, Q., Frogley, M.D., Meurs, E.R., Prins, A.D., Peljs, T., Dunstan, D.J. and Wagner, H.D. (2000), "Carbon nanotube: from molecular to macroscopic sensors", Phys. Rev. B, 62, 7571. https://doi.org/10.1103/PhysRevB.62.7571
  31. Xie, P., Gu, P. and Beaudoin, J.J. (1996), "Electrical percolation phenomena in cement composites containing conductive fibres", J. Mater. Sci., 31, 4093-4097. https://doi.org/10.1007/BF00352673
  32. Yap, S.P., Alengaram, U.J. and Jumaat, M.Z. (2013), "Enhancement of mechanical properties in polypropylene-and nylon-fibre reinforced oil palm shell concrete", Mater. Design, 49, 1034-1041. https://doi.org/10.1016/j.matdes.2013.02.070
  33. Yu, X. and Kwon, E. (2009), "A carbon nanotube/cement composite with piezoresistive properties", Smart Mater. Struct., 18(5), 0550109(5pages)
  34. Zhao, Q., Frogley, M.D. and Wagner, H.D. (2001), "The use of carbon nanotubes to sense matrix stresses around a single glass fiber", Compos. Sci. Technol., 61(14), 2139-2143. https://doi.org/10.1016/S0266-3538(01)00166-X

피인용 문헌

  1. Mechanical properties and piezoresistive sensing capabilities of FRP composites incorporating CNT fibers vol.178, 2017, https://doi.org/10.1016/j.compstruct.2017.07.008
  2. Flexural stress and crack sensing capabilities of MWNT/cement composites vol.175, 2017, https://doi.org/10.1016/j.compstruct.2017.04.078
  3. Electrical resistivity reduction with pitch-based carbon fiber into multi-walled carbon nanotube (MWCNT)-embedded cement composites vol.165, 2018, https://doi.org/10.1016/j.conbuildmat.2017.12.205
  4. Potential of metal monoliths with grown carbon nanomaterials as catalyst support in intensified steam reformer: a perspective vol.0, pp.0, 2018, https://doi.org/10.1515/revce-2018-0007
  5. Electrical conductivity of the graphene nanoplatelets coated natural and synthetic fibres using electrophoretic deposition technique vol.9, pp.3, 2018, https://doi.org/10.1080/19475411.2018.1476419
  6. Load transfer and energy absorption in transversely compressed multi-walled carbon nanotubes vol.6, pp.3, 2016, https://doi.org/10.12989/csm.2017.6.3.273
  7. Piezoresistive Load Sensing and Percolation Phenomena in Portland Cement Composite Modified with In-Situ Synthesized Carbon Nanofibers vol.9, pp.4, 2019, https://doi.org/10.3390/nano9040594
  8. State of the Art on Sensing Capability of Poorly or Nonconductive Matrixes with a Special Focus on Portland Cement-Based Materials vol.31, pp.11, 2016, https://doi.org/10.1061/(asce)mt.1943-5533.0002901
  9. Smart Graphite–Cement Composite for Roadway-Integrated Weigh-In-Motion Sensing vol.20, pp.16, 2020, https://doi.org/10.3390/s20164518
  10. A Study on Mechanical Characteristics of Cement Composites Fabricated with Nano-Silica and Carbon Nanotube vol.11, pp.1, 2021, https://doi.org/10.3390/app11010152
  11. Nonlinear Behavior of Single Walled Carbon Nanotube Reinforced Aluminium Alloy Beam vol.69, pp.None, 2016, https://doi.org/10.4028/www.scientific.net/jnanor.69.89
  12. Electromagnetic Wave Shielding Properties of Amorphous Metallic Fiber-Reinforced High-Strength Concrete Using Waveguides vol.14, pp.22, 2016, https://doi.org/10.3390/ma14227052
  13. A Comparative Study on the Electrical and Piezoresistive Sensing Characteristics of GFRP and CFRP Composites with Hybridized Incorporation of Carbon Nanotubes, Graphenes, Carbon Nanofibers, and Graphi vol.21, pp.21, 2016, https://doi.org/10.3390/s21217291
  14. Effects of exposure temperature on the piezoresistive sensing performances of MWCNT-embedded cementitious sensor vol.47, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103816