한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제33권7호
  • /
  • Pages.601-606
  • /
  • 2016
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

초소형 전자기 유도방식 에너지 하베스터용 연성 박막 다적층 평판 코일 설계 및 제작

Design and Fabrication of Flexible Thin Multilayered Planar Coil for Micro Electromagnetic Induction Energy Harvester

  • 박현철 (STX엔진주식회사 엔진기술연구소)
  • 투고 : 2015.11.20
  • 심사 : 2016.04.29
  • 발행 : 2016.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, an energy harvester is developed that has advantages regarding piezoelectric noise minimization, mass production, and an easily available environmental energy source, electromagnetic induction, as well as low-frequency bandwidth and high amplitude. A process for fabricating a three-dimensional multilayered planar coil using micro-electro-mechanical systems (MEMS) on a flexible printed circuit board FPCB is introduced. Optimal shape and size were calculated via internal resistance and inductance, and a prototype was fabricated through the MEMS procedure while considering the possibility of mass production. Although the internal resistance matched the designed value, the electromotive force generated did not reach the intended amount. The main reason for the decrease in efficiency was the low area of coil outskirt exposed to the magnetic field while there was relative motion between the magnet and the coil.

키워드

참고문헌

  1. Shin, Y.-H. and Lee, Y.-P., "Measurement on Vibration Mode of Tire Wheel as an Energy Source of Micro Power," Transactions of the Korean Hydrogen and New Energy Society, Vol. 20, No. 1, pp. 64-72, 2009.
  2. Park, H. and Kim, J., "Electromagnetic Induction Energy Harvester for High-Speed Railroad Applications," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 3, No. 1, pp. 41-48, 2016. https://doi.org/10.1007/s40684-016-0006-6
  3. Mohan, S. S., del Mar Hershenson, M., Boyd, S. P., and Lee, T. H., "Simple Accurate Expressions for Planar Spiral Inductances," IEEE Journal of Solid- State Circuits, Vol. 34, No. 10, pp. 1419-1424, 1999. https://doi.org/10.1109/4.792620
  4. Zhao, J., "A New Calculation for Designing Multilayer Planar Spiral Inductors," Electrical Design News, Vol. 55, No. 14, pp. 37-40, 2010.
  5. Williams, C. B. and Yates, R. B., "Analysis of a Micro-Electric Generator for Microsystems," Sensors and Actuators A: Physical, Vol. 52, No. 1, pp. 8-11, 1996. https://doi.org/10.1016/0924-4247(96)80118-X
  6. Park, H., Moon, Y., and Kwon, S., "Development of Rotational Type of Wheel-Based Electromagnetic Induction Energy Harvester by Using Orthogonal Array," Transactions of the Korean Society of Mechanical Engineers B, Vol. 37, No. 2, pp. 125-130, 2013. https://doi.org/10.3795/KSME-B.2013.37.2.125