동력기계공학회지 (Journal of Power System Engineering)

  • 제20권3호
  • /
  • Pages.57-63
  • /
  • 2016
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

작동각을 고려한 차량 후드 프레임의 실험식 개발

Development of Experimental Equation of Hood Frame for Vehicle Considering Operating Angle

  • 송요선 (한국폴리텍대학 구미캠퍼스 컴퓨터응용기계과) ;
  • 허관도 (동의대학교 기계공학과) ;
  • 손인수 (동의대학교 기계공학과)
  • Song, Yo-Sun (Computer Aided Machinery, Korea Polytechnics Gumi Campus) ;
  • Hur, Kwan-Do (Department of Mechanical Engineering, Dong-eui University) ;
  • Son, In-Soo (Department of Mechanical Engineering, Dong-eui University)
  • 투고 : 2016.04.16
  • 심사 : 2016.06.07
  • 발행 : 2016.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the experimental result and theoretical analysis result to investigate the correlation between the operating force, angle and locking torque for vehicle hood frame. Also, we derived the experimental equation that using the results for experiment and theory. The hood frame is switching-devices used for opening and closing the vehicle hood. It needs the correlation data between locking torques of each joint, operating force and angle of hood frame. The correlation data for torque and reaction force of hood frame obtained through experiment and theory analysis. Finally, the experimental equation of the locking torque prediction for the hood frame is derived.

키워드

참고문헌

  1. S. H. Shin, C. Cheong and S. S. Jung, 2007, "Experimental Evaluation of Buzz, Squeak and Rattle Noise of Vehicle Doors and Its Prevention", Transactions of Korean Society for Noise and Vibration Engineering, Vol. 17, No. 12, pp. 1217-1222. https://doi.org/10.5050/KSNVN.2007.17.12.1217
  2. S. J. Ahn et al., 2013, "Study on Property of NVH of Vehicle Doors Latch Part", Proceedings of the KSMPE Autumn Conference, p. 113.
  3. J. Hong, S. Seo, S. Kang, D. Lee, J. Ju and B. Park, 2013, "The Study of Hood Trembling on Driving Bumpy Road", Proceedings of the KSAE 2016 Annual Fall Conference, pp. 1065-1066.
  4. J. Y. Park, M. K. Im, Y. K. Oh, J. Y. Park and S. Y. Han, 2010, "Topology Optimization of the Inner Reinforcement of a Vehicle's Hood using Reliability Analysis", Journal of KSMTE, Vol. 19, No. 5, pp. 691-697.
  5. I. S. Son, S. J. Ahn, H. S. Eom, K. D. Hur, S. P. Lee and J. K. Lee, 2015, "Design Analysis of 4-Link Hood Frame for Vehicle", Proceedings of the KSME Fall Annual Meeting. p. 2069.
  6. K. S. Kim, J. Hwang, D. W. Lee, S. M. Lee and S. J. Lee, 2015, "Study on the Frictional Torque in the Angular Contact Ball Bearing for Machine Tool Spindle by Empirical Formula", Journal of KSPE, Vol. 32, No. 2, pp. 149-157. https://doi.org/10.7736/KSPE.2015.32.2.149
  7. Y. W. Shin and S. K. Lee, 2011, "Development an Empirical Formula for the Friction Coefficient of a Circular Friction Damper", Transactions of Korean Society for Noise and Vibration Engineering, Vol. 21, No. 6, pp. 491-498. https://doi.org/10.5050/KSNVE.2011.21.6.491
  8. S. I. Hong, 2007, "Machine Design", Munundang, Chapter 6.

피인용 문헌

  1. Characteristics of Forging Hinge of Sidegate for Wing Body and Refrigerated Van Special Vehicles vol.24, pp.6, 2016, https://doi.org/10.9726/kspse.2020.24.6.045