초록
산악지 풍화대를 관통하는 도로 NATM터널에서 록볼트+숏크리트 타설과 강관다단 그라우팅 보강작업 진행 중, 터널 천단부붕락(토피고 25m) 및 지표면 함몰($V=12m{\times}14m{\times}$높이 5m = $840m^3$)과 터널 내 과다한 변위가 발생하였다. 원활한 후속 공사를 위해 각종 조사 자료와 시험, 분석을 통해 함몰(땅꺼짐) 원인을 분석하고 수치해석을 통하여 적절한 갱내외 보강범위를 다양하게 검토한 후 대책공법을 제시하였다. 수치해석 결과 터널 종횡방향 0.5D, 터널 상단 1.0D에서 보강효율이 가장 좋은 것으로 분석되었다. 터널 지상부는 시멘트밀크그라우팅으로, 터널 내부는 대구경강관다단 3열 중첩으로 보강하였다. 라이닝에 철근을 보강하고 잔여 터널구간에 선진수평보링을 적용하여 사전에 막장 전방상태를 파악하고 필요시 적절한 보강을 하도록 하였다.
The construction of the road NATM tunnel, which undergoes the weathered zone of the mountain, was in process with the reinforcement methods such as the rock bolt, shotcrete depositing, and the multi step grout with large diameter steel pipe. The collapse from the ceiling, and on the ground surface area(sink hole), of which were measured to be 25m from the ground surface($V=12m(W){\times}14m(L){\times}5m(H)=840m^3$), as well as excessive displacements in the tunnel, had occurred. In order to execute the necessary reconstruction work, the causes of the surface collapses were inspected through the field investigation, in-situ tests, and numerical analysis. As a result, several proper solutions were suggested for both internal and external reinforcements for the tunnel. As a result of numerical analysis, the collapsed zone of the tunnel was reinforced up to 0.5D~1.0D laterally by the cement grouting on the ground surface, 0.5D longitudinally by the multi step grout with large diameter steel pipe in tunnel. With further reinforcement implemented by rebars in lining, the forward horizontal boring was executed to the rest of the tunnel to evaluate the overall status of the tunnel face. Appropriate reinforcement methods were provided if needed.
