References
- Thyer AM, Jagger SF, Atherton W, Ash JW. A review of catastrophic failures of bulk liquid storage tanks. Loss Prev Bull 2009;205:3-11.
- United States Environmental Protection Agency (EPA). Chemical alert: rupture hazard from liquid storage tanks. Washington DC (WA): EPA; 2001. Report No.: EPA 550-F-01-001.
- Thyer AM, Hirst IL, Jagger SF. Bund overtopping-the consequence of catastrophic tank failure. J Loss Prev Proc Ind 2002;15:357-63. https://doi.org/10.1016/S0950-4230(02)00023-2
- Atherton W, Ash JW, Alkhaddar RM. An empirical study into overtopping and dynamic pressures on a bund wall post catastrophic failure of a storage vessel. IChemE Symposium Series No. 153. 2007.
- Allied Terminals, Inc. Catastrophic tank collapse (two serious injuries, community evacuation). Chesapeake, Virginia November 12, 2008. Washington DC (WA): U.S. Chemical Safety and Hazard Investigation Board; May 2009. Report No. 2009-03-I-Va.
- Geary W, Hobbs J. Catastrophic failure of a carbon steel storage tank due to internal corrosion. Case Stud Eng Fail Anal 2013;1:257-64. https://doi.org/10.1016/j.csefa.2013.09.002
- Weinreich E. Vellykket men stinkende indsats. Brandvaesen 2011;9:75-7 [in Danish].
- Olycka med utslapp av svavelsyra vid Kemira Kemi AB i Helsingborg, M lan, den 4 Februari 2005, Karlstad, Sweden: Statens haverikommission (SHK)/ Swedish Accident Investigation Board; May 2008. Rapport RO 2008:02 [in Swedish].
- The Pressure Equipment Directive (PED). Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997.
- Huige NJ. Brewery by-products and effluents. In: Priest FG, Stewart GG, editors. Handbook of brewing. 2nd ed. Abingdon (UK): Taylor & Francis; 2006.
- American Petroleum Institute (API). Welded steel tanks for oil storage. API Standard 650. 10th ed. Addendum 3. Lansing (MI): API; 2003.
- Kurttila H. Isentropic exergy and pressure of the shock wave caused by the explosion of a pressure vessel (PhD thesis). Lappeenranta (Finland): Lappeenranta University of Technology; 2003.
- Turner B. Man-made disasters. London (UK): Wykeham Science Press; 1978.
- Maurino DE, Reason J, Johnston N, Lee RB. Beyond aviation human factors: safety in high technology systems. Burlington (VT): Ashgate; 1995.
- Reason JT. Managing the risks of organizational accidents. Burlington (VT): Ashgate; 1997.
- Smith P, Zappe RW. Rupture discs. In: Valve selection handbook. Engineering fundamentals for selecting the right valve design for every industrial flow application. 5th ed. Houston (TX): Gulf; 2004. p. 227-67.
- International Organization for Standardization (ISO). Diagrams for the chemical and petrochemical industrydpart 2: graphical symbols. European Committee for Standardization (CEN); 2012. Report ISO 10628-2:2012.
- American National Standards Institute/International Society of Automation (ANSI/ISA). Instrumentation symbols and identification. Research Triangle Park (NC): ISA; 2009. Report ANSI/ISA-5.1-2009.
- Kayser DS, Liptak BG, Miller D. Rupture discs. In: Liptak BG, editor. Instrument Engineers' Handbook. Process Measurement and Analysis, Chapter 7.17. 4th ed., Vol. 1. Boca Raton, London, New York, Washington DC (WA): CRC Press; 2003. p. 1018-29.
- Watton BK, Brodie GW. Reverse domed buckling discs, a pressure relief device, their performance and problems. Institution of Chemical Engineers Symposium Series 1984. Rugby (UK): Institution of Chemical Engineers. 1984;I85:51-65.
- Swift I, Experimental study of the consequences of improperly specified or installed rupture discs. Summer National Meeting Minneapolis, Minnesota, Aug 16-19, 1987. New York (NY): American Institute of Chemical Engineers. 1987. Paper no. 51E.
- Schrank M. Investigation on the degradation and opening behavior of knife blade burst disks. Loss Prev Proc Ind 2014;32:161-4. https://doi.org/10.1016/j.jlp.2014.08.011
Cited by
- Reducing the Risk of Failure by Deliberate Weaknesses : vol.9, pp.2, 2016, https://doi.org/10.4018/ijrcm.2020040103