DOI QR코드

DOI QR Code

Evaluation on the Mechanical Performance of Low-Quality Recycled Aggregate Through Interface Enhancement Between Cement Matrix and Coarse Aggregate by Surface Modification Technology

  • 투고 : 2015.09.01
  • 심사 : 2015.12.20
  • 발행 : 2016.03.30

초록

In this study, a quantitative review was performed on the mechanical performance, permeation resistance of concrete, and durability of surface-modified coarse aggregates (SMCA) produced using low-quality recycled coarse aggregates, the surface of which was modified using a fine inorganic powder. The shear bond strength was first measured experimentally and the interface between the SMCA and the cement matrix was observed with field-emission scanning electron microscopy. The results showed that a reinforcement of the interfacial transition zone (ITZ), a weak part of the concrete, by coating the surface of the original coarse aggregate with surface-modification material, can help suppress the occurrence of microcracks and improve the mechanical performance of the aggregate. Also, the use of low-quality recycled coarse aggregates, the surfaces of which were modified using inorganic materials, resulted in improved strength, permeability, and durability of concrete. These results are thought to be due to the enhanced adhesion between the recycled coarse aggregates and the cement matrix, which resulted from the improved ITZ in the interface between a coarse aggregate and the cement matrix.

키워드

참고문헌

  1. Choi, H. S., Kitagaki, R., & Noguchi, T. (2012). A study on the completely recovery of surface modification aggregate using microwave and effective utilization. In Proceedings of the 5th ACF international conference, Pattaya, Thailand, October 2012, Session 1-2, ACF2012-0093 (pp. 41-46).
  2. Choi, H. S., Kitagaki, R., & Noguchi, T. (2014a). Effective recycling of surface modification aggregate using microwave heating. Journal of Advanced Concrete Technology, 12, 34-45. https://doi.org/10.3151/jact.12.34
  3. Choi, H. S., Kitagaki, R., & Noguchi, T. (2014b). Using microwave heating to completely recycle concrete. Journal of Environmental Protection, 5, 583-596. https://doi.org/10.4236/jep.2014.57060
  4. Hendriks, C. H. F., & Janssen, G. M. T. (2001). Construction and demolition waste-General process. HERON, 46, 79-88.
  5. Hilsdorf, H. K., & Kropp, J. (1995). Performance criteria for durability, RILEM Report 12, London, UK, pp. 166-178.
  6. Jacobsen, S. (1996). Effect of cracking and healing on chloride transport in OPC concrete. Cement and Concrete Research, 26(6), 869-881. https://doi.org/10.1016/0008-8846(96)00072-5
  7. Khatri, R. P., & Sirivivatnanon, V. (1997). Role of permeability in sulfate attack. Cement and Concrete Research, 27(8), 1179-1189. https://doi.org/10.1016/S0008-8846(97)00119-1
  8. Kumar Mehta, P., & Moneiro, P. J. M. (2006). Concrete-Microstructure, Properties and Materials. New York, NY: McGraw-Hill Companies.
  9. Nagataki, S., Gokce, A., & Saeki, T. (2000). Effects of recycled aggregate characteristics on performance parameters of recycled aggregate concrete. American Concrete Institute, ACI Special Publication, 52, 462-467.
  10. Noguchi, T. (2008). Resource recycling in concrete: Present and future. Stock Management for Sustainable Urban Regeneration, 4, 255-274.
  11. Noguchi, T., & Tamura, M. (2001). Concrete design towards complete recycling. Structural Concrete Journal of the fib, 2, 155-167. https://doi.org/10.1680/stco.2001.2.3.155
  12. Shima, H., Tateyashiki, H., Matsuhashi, R., & Yoshida, Y. (2005). An advanced concrete recycling technology and its applicability assessment through input-output analysis. Journal of Advanced Concrete Technology, 3, 53-67. https://doi.org/10.3151/jact.3.53
  13. Tazawa, E. (2002). Concrete engineering (p. 127). Tokyo, Japan: Asakura Publication.
  14. Tsujino, M., Noguchi, T., Tamura, M., Kanematsu, M., & Maruyama, I. (2007). Application of conventionally recycled coarse aggregate to concrete structure by surface modification treatment. Journal of Advanced Concrete Technology, 5, 13-25. doi:10.3151/jact.5.13.
  15. Tsujino, M., Noguchi, T., Kitagaki, R., & Nagai, H. (2010). Completely recyclable concrete of aggregate-recovery type by a new technique using aggregate coating. Architectural Institute of Japan, 75(647), 17-24. (in Japanese).
  16. Tsujino, M., Noguchi, T., Kitagaki, R., & Nagai, H. (2011). Completely recyclable concrete of aggregate-recovery type by using microwave heating. Architectural Institute of Japan, 76(660), 223-229. (in Japanese).
  17. Um, T. S., & Choi, S. H. (1997). The effect of the mineralogical features of aggregates in the bonding force and workability of the concrete. Journal of the Korea Concrete Institute, 9(5), 207-216. (in Korean).
  18. Wang, K., Jansen, D. C., & Shah, S. P. (1997). Permeability study of cracked concrete. Cement and Concrete Research, 27(3), 381-393. https://doi.org/10.1016/S0008-8846(97)00031-8
  19. Xiao, J. (2013). Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation. Cement and Concrete Research, 37(3), 276-292. https://doi.org/10.1016/j.cemconcomp.2013.01.006

피인용 문헌

  1. Effect of Surface Modifications of Recycled Concrete Aggregate on Concrete Properties vol.8, pp.1, 2016, https://doi.org/10.3390/buildings8010002
  2. Experimental Investigation of PCC Incorporating RAP vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0227-x
  3. Effects of Redispersible Polymer Powder on Mechanical and Durability Properties of Preplaced Aggregate Concrete with Recycled Railway Ballast vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0304-1
  4. Quality Improvement Techniques for Recycled Concrete Aggregate: A review vol.17, pp.4, 2016, https://doi.org/10.3151/jact.17.151
  5. Seismic performance of full-scale RC columns containing high proportion recycled aggregate vol.17, pp.11, 2016, https://doi.org/10.1007/s10518-019-00687-0
  6. Mechanical Behavior of Recycled Fine Aggregate Concrete with High Slump Property in Normal- and High-Strength vol.13, pp.1, 2016, https://doi.org/10.1186/s40069-019-0372-x
  7. Strength evaluation of eco-friendly concrete using Taguchi method vol.22, pp.3, 2016, https://doi.org/10.1016/j.matpr.2019.11.136
  8. Influence of the Aggregate Surface Conditions on the Strength of Quick-Converting Track Concrete vol.10, pp.6, 2016, https://doi.org/10.3390/cryst10060543
  9. Effect of Aggregate Type and Specimen Configuration on Concrete Compressive Strength vol.10, pp.7, 2016, https://doi.org/10.3390/cryst10070625
  10. A review on methods to improve the quality of recycled concrete aggregates vol.10, pp.2, 2016, https://doi.org/10.1080/21650373.2020.1748742
  11. Treatment of recycled concrete aggregate to enhance concrete performance vol.307, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2021.124960
  12. Utilization of Recycled Aggregate Concrete for Marine Site Based on 7-Year Field Monitoring vol.15, pp.1, 2016, https://doi.org/10.1186/s40069-021-00473-w