한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제19권3호
  • /
  • Pages.281-287
  • /
  • 2016
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

자주포 보조동력장치 엔진 마운트 강도안전율 향상에 관한 연구

A Study on Improvement of Strength Safety Factor for K55A1 APU Engine Mounts

  • 김병현 (국방기술품질원 창원센터) ;
  • 서재현 (국방기술품질원 창원센터) ;
  • 박영일 (국방기술품질원 창원센터) ;
  • 김용욱 (국방기술품질원 창원센터) ;
  • 김병호 (국방기술품질원 창원센터)
  • Kim, Byung Hyun (Changwon Center, Defense Agency for Technology and Quality) ;
  • Seo, Jae Hyun (Changwon Center, Defense Agency for Technology and Quality) ;
  • Park, Young Il (Changwon Center, Defense Agency for Technology and Quality) ;
  • Kim, Yong Wook (Changwon Center, Defense Agency for Technology and Quality) ;
  • Kim, Byung Ho (Changwon Center, Defense Agency for Technology and Quality)
  • 투고 : 2015.11.02
  • 심사 : 2016.04.29
  • 발행 : 2016.06.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study is to analyze the vibration characteristics and develop a mounting which can improve the strength safety factor to replace the high failure rate APU(auxiliary power unit) imported metal mounts with rubber mount that can be domestically produced. For this study, we analyzed in 3 kinds of rubber mounts hardness for the natural frequency to avoid the average excited frequency of the APU. In addition, allowed vibration acceleration of rubber mount confirmed to 90.8 g by adding a strength safety factor. To assure the validity of the design, we measure the vibration acceleration equipped with a metal mount and rubber mount 2 species(Hs 50 and 60). As a result, the proposed design method in this study is reasonable because the rubber mounts is excellent strength safety factor and vibration transmissibility than metal mounts.

키워드

참고문헌

  1. B. H. Kim, H. J. Kang, Y. I. Park, J. H. Seo, "The Optimal Design Technique for Improving Durability of Spline Shaft of the Self Propelled Artillery' Generator," Journal of the Korea Institute of Military Science and Technology, Vol. 18, No. 5, pp. 1-7, 2015. https://doi.org/10.9766/KIMST.2015.18.1.001
  2. DTaQ, "A Report on the Improvement for the Auxiliary Power Unit(APU) Mounts of K55A1," 2014.
  3. S. Y. Youn, S. C. Lee, "Development of Shear Type Rubber Isolator," Journal of the Korean Society of Precision Engineering, Vol. 15, No. 10, 1998.
  4. S. J. Moon., Y. H. Shin, J. H. Chung and C. K. Song "Experimental Review on Dynamic Characteristics of the Commercial Mounts for Vibration Reduction," Trans. Korean Soc. Noise Vib. Eng., Vol. 24, No. 9, pp. 687-694, 2014. https://doi.org/10.5050/KSNVE.2014.24.9.687
  5. Y. K. Ahn, D. W. Kim "Hybrid Rubber Mount by Using Magnetic Force," Trans. Korean Soc. Noise Vib. Eng., Vol. 24, No. 3, pp. 236-246, 2014. https://doi.org/10.5050/KSNVE.2013.24.3.236