DOI QR코드

DOI QR Code

Dynamic Performance Evaluation of Blood Flow Simulator Based on Windkessel Models

공기압력모델에 기반한 혈류 시뮬레이터의 동적 특성 평가

  • Chun, Sejong (Division of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Jin, Jonghan (Division of Physical Metrology, Korea Research Institute of Standards and Science)
  • 전세종 (한국표준과학연구원 기반표준본부) ;
  • 진종한 (한국표준과학연구원 기반표준본부)
  • Received : 2015.09.14
  • Accepted : 2016.02.29
  • Published : 2016.06.03

Abstract

A blood flow simulator is one of the experimental devices used to better understand the cardiovascular system. Time-Domain analysis is not sufficient to understand the cardiovascular system because of the effects related to pulsating flows. Even when the mean pressure and mean flow rate of the blood flow simulators are satisfied, the dynamic properties can differ from the desired performance. In this paper, the Windkessel model, a well-known mathematical model of the cardiovascular system, was employed to obtain optimized pressure using initial values. The Windkessel parameters, including flow resistance, R, are expected to lead to a better understanding of the dynamic behavior of cardiovascular systems.

Keywords

References

  1. Kim, D. H., Kim, H. R., Oh, H. J., and Jeon, H. H., "Basic Introduction of Cardiology," Yedang Books, pp. 23-24, 2011.
  2. Fine, J. and Waite, L., "Applied Biofluid Mechanics," McGraw-Hill, pp. 275-297, 2007.
  3. Kim, E. J., Yoo, J. Y., Cheon, W. S., Han, S. W., Choi, Y. J., et al., "Coronary Artery Size in Korean: Normal Value and Its Determinants," Korean Circulation Journal, Vol. 35, No. 2, pp. 115-122, 2005. https://doi.org/10.4070/kcj.2005.35.2.115
  4. Parragh, S., Hametner, B., and Wassertheurer, S., "Influence of an Asymptotic Pressure Level on the Windkessel Models of the Arterial System," IFAC-PapersOnLine, Vol. 48, No. 1, pp. 17-22, 2015.
  5. Tyberg, J. V., Bouwmeester, J. C., Parker, K. H., Shrive, N. G., and Wang, J.-J., "The Case for the Reservoir-Wave Approach," International Journal of Cardiology, Vol. 172, No. 2, pp. 299-306, 2014. https://doi.org/10.1016/j.ijcard.2013.12.178
  6. Alimohammadi, M., Agu, O., Balabani, S., and Diaz- Zuccarini, V., "Development of a Patient-Specific Simulation Tool to Analyse Aortic Dissections: Assessment of Mixed Patient-Specific Flow and Pressure Boundary Conditions," Medical Engineering & Physics, Vol. 36, No. 3, pp. 275-284, 2014. https://doi.org/10.1016/j.medengphy.2013.11.003
  7. Hametner, B., Wassertheurer, S., Kropf, J., Mayer, C., Eber, B., et al., "Windkessel-Model Derived Reservoir and Excess Pressures Predict Cardiovascular Events in High-Risk Patients," Artery Research, Vol. 6, No. 4, p. 147, 2012.
  8. Om, K., Ahn, J., and Min, B., "Static State Hemodynamic Variables Estimation Model for the Moving-Actuator Type Total Artificial Heart. Part. I--Cardiac Output Estimation," The International Journal of Artificial Organs, Vol. 22, No. 1, pp. 21-26, 1999. https://doi.org/10.1177/039139889902200106
  9. Om, K., Jo, Y., and Min, B., "Static State Hemodynamic Variables Estimation Model for the Moving-Actuator Type Total Artificial Heart. Part II-Aortic Pressure Estimation," The International Journal of Artificial Organs, Vol. 22, No. 2, pp. 108-112, 1999. https://doi.org/10.1177/039139889902200208
  10. Nam, K. W., Lee, J. J., Hwang, C. M., Choi, J., Choi, H., et al., "Development of an Algorithm to Regulate Pump Output for a Closed Air-Loop Type Pneumatic Biventricular Assist Device," Artificial Organs, Vol. 33, No. 12, pp. 1063-1068, 2009. https://doi.org/10.1111/j.1525-1594.2009.00809.x
  11. Chun, S. and Jin, J., "Output Power Measurement of a Blood Pump Considering Pulsating Flows," Journal of Mechanical Science and Technology, Vol. 26, No. 3, pp. 793-798, 2012. https://doi.org/10.1007/s12206-011-1239-5
  12. Ray, S., Unsal, B., and Durst, F., "Development Length of Sinusoidally Pulsating Laminar Pipe Flows in Moderate and High Reynolds Number Regimes," International Journal of Heat and Fluid Flow, Vol. 37, pp. 167-176, 2012. https://doi.org/10.1016/j.ijheatfluidflow.2012.06.001
  13. Aygun, C. and Aydin, O., "Hydrodynamics of Piston-Driven Laminar Pulsating Flow: Part 1. Developing Flow," Nuclear Engineering and Design, Vol. 274, pp. 164-171, 2014. https://doi.org/10.1016/j.nucengdes.2014.02.017
  14. Aygun, C. and Aydin, O., "Hydrodynamics of Piston-Driven Laminar Pulsating Flow: Part 2. Fully Developed Flow," Nuclear Engineering and Design, Vol. 274, pp. 172-180, 2014. https://doi.org/10.1016/j.nucengdes.2014.02.018