DOI QR코드

DOI QR Code

Shaft 가공라인 자원 가동률 향상을 위한 모델링

Support of shaft process line Modeling for improving operation rate

  • 임상백 (명지대학교 산업경영공학과) ;
  • 강경식 (명지대학교 산업경영공학과)
  • Lim, Sang-Baek (Department of Industrial Management Engineering, MYONGJI University) ;
  • Kang, Kyung-Sik (Department of Industrial Management Engineering, MYONGJI University)
  • 투고 : 2016.10.20
  • 심사 : 2016.12.20
  • 발행 : 2016.12.30

초록

The purposes of this research are to modelize test system of SM TESTING by ARENA, software, input several items of specimen's testing process, resources of system and transfer loop, etc, give a hypothesis and then, obtain results reducing the efficiency of the whole system finally by overload of specific facilities in the testing system through the simulation so as to obtain several materials such as specimen and testing facility, transfer loop, etc. by simple and various forms without any necessity of numerical modelization. It will add facilities of over load and reduce facilities with low operation rate, so increase the efficiency of the system.

키워드

참고문헌

  1. Written by Yang Sung-min, (2003), Computer simulation, Publishing department of Gyungsung Univ.
  2. Written by two writers including W. David kelton, (2002), Simuilation with Arena Kyobo Book Centre.
  3. Written by Kim Ju-yun, (1994), Computer simulation, Pakyoungsa.
  4. Written by Kim Yong-sik, (2004), Realization of the design of multi-channel visualized module based on PC cluster for virtual factory simulation, Korea advanced institute for science and technology.
  5. Written by Sung Jae-hyun, (2003), A study on the simulation for engine block process line designing resources, graduate school of industrial information, Changwon Univ.