대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

  • 제32권5호
  • /
  • Pages.3-10
  • /
  • 2016
  • /
  • 1226-9107(pISSN)
  • /
  • 2384-1788(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

LW 그라우팅 주입재로서 무시멘트 결합재의 적용 가능범위 산정

Estimation of the Applicable Range of Non-cement Binder as LW Grouting Materials

  • 투고 : 2015.12.22
  • 심사 : 2016.05.11
  • 발행 : 2016.05.30
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, it is more important to develop the environment-friendly binder as soil grouting materials for conforming to the government policy, "Green Growth". In this research, characteristic properties of gel time and homo gel strength of liquid chemical grouting materials for soil grouting using non-cement binder(NCB) were evaluated according to binder types, liquid B's W/B, liquid B's replacement ratio and the binder volume in order to estimate the applicable range of NCB as LW grouting materials. The test was performed using ordinary portland cement(OPC) as well as NCB1, NCB2, NCB3 which are environment-friendly inorganic binders developed by means of collaboration research by our company and which are different from chemical composition ratio each other. In conclusion, it was found that experimental estimated applicable range of binder volume is albe to a range of $92.6{\sim}166.6{\ell}$(NCB1), $32.0{\sim}151.3{\ell}$(NCB2), $20.4{\sim}91.0{\ell}$(NCB3) which is satisfied with the target gel time range(20~50sec.) and target homo gel strength range(more than 2MPa) in condition of $20^{\circ}C$(water temperature). And NCB could be applied to LW grouting materials and replace OPC, because NCB had the most excellent performance in certain section of gel time and homo gel strength in condition of this experiment.

키워드

과제정보

연구 과제번호 : BK21플러스

연구 과제 주관 기관 : 충남대학교

참고문헌

  1. An, Y., Hyung, W., Mun, K., & Yoon, S. (2012). Strength Characteristics of Solidified Soil with Binder made of Industrial By-products, Proceeding of the Korea Institute of Building Construction, 2012 Nov., 213-214.
  2. Cho, Y. (2011). A Study on the Characteristics of Alkali Silicasol Grouting Material, Hanyang University Master's Thesis, 1-40.
  3. Han, Y. (2012). Strength Development Characteristics of Inorganic Ground Injection Material(NDS), Hanyang University Master's Thesis, 1-50.
  4. Kim, H. (2011). A Study on the Characteristics of Alkali Silicasol-Cement Grout Material for Ground Reinforcement, Hanyang University Doctor Dissertation, 1-89.
  5. Kim, J. (1999). A study on the injection properties of ultrafine cement grouting materials, Hanyang University Doctor Dissertation, 1-139.
  6. Kim, Y. (2014). A Study on the Characteristics of Alkali Silicasol-Cement Grout Material for Ground Reinforcement, Hanyang University Doctor Dissertation, 1-89.
  7. Lee, J. (2014). Research on Cost Saving Binder, Daelim Industrial Yearly Research Report, 1-105.
  8. Mun, K., Lee, M., & Yoon, S. (2014). Development of Non-cement Material using Recycled Resources, Proceeding of the Korea Institute of Building Construction, 2014 Nov., 156-157.
  9. Park, D. (2009). Environmentally Friendly Characteristics and Durability of Inorganic Reinforcement Materials, Hanyang University Doctor Dissertation, 1-121.