DOI QR코드

DOI QR Code

Pile-cap Connection Behavior Dependent on the Connecting Method between PHC pile and Footing

PHC말뚝과 확대기초 연결방법에 따른 접합부 거동

  • Received : 2015.11.02
  • Accepted : 2015.12.29
  • Published : 2016.05.01

Abstract

The pile-cap connection part which transfers foundation loads through pile body is critical element regarding flexural and shear force because the change of area, stress, and stiffness occurs in the this region suddenly. The purpose of this study is to investigate the structural behavior of pile-cap connection dependent on fabrication methods using conventional PHC pile and composite PHC pile. A series of test under cyclic lateral load was performed and the connection behavior was discussed. From the test results, it was found that the initial rotational stiffness of pile-cap connection was affected by the length of pile-head inserted in footing and the location of longitudinal reinforcing bars. The types of pile and location of longitudinal reinforcing bars governed the behavior of pile-cap connection regarding load-carrying capacity, ductility, and energy dissipation.

말뚝머리-확대기초 접합부는 상부구조물의 하중을 말뚝으로 전달하는 연결부분으로서 부재의 단면과 강성의 급격히 변화하는 부위이기 때문에 응력이 집중되고 작용하는 휨모멘트와 전단력이 큰 취약부분이다. 이 연구에서는 제작조건에 따른 PHC말뚝 및 합성 PHC말뚝과 확대기초 접합부의 구조성능을 평가하는데 목적이 있다. 반복가력 하중 조건하에서의 균열패턴, 하중-변위관계, 연성비, 초기 회전강성 및 에너지소산 특성을 각각 평가하였다. 접합부 초기 회전강성은 확대기초 내부로 삽입되는 말뚝삽입 깊이와 축방향철근 배근위치에 큰 영향을 받는 것으로 나타났다. 또한 접합부 강도, 연성비 및 누적 에너지소산 등의 접합부 거동은 말뚝의 종류와 축방향 철근 배근 위치에 영향을 받는 것으로 나타났다.

Keywords

References

  1. Bang, J. W., Hyun, J. H., Lee, B. Y., and Kim, Y. Y. (2014), Cyclic Behavior of Connection between Footing and Concrete-Infilled Composite PHC Pile, Structural Engineering and Mechanics, 50(6), 741-754. https://doi.org/10.12989/sem.2014.50.6.741
  2. Bang, J. W., Hyun, J. H., Lee, B. Y., Lee, B. J., and Kim, Y. Y (2014), Effects of Infilled Concrete and Longitudinal Rebar on Flexural Performance of Composite PHC Pile, Structural Engineering and Mechanics, 52(4), 843-855. https://doi.org/10.12989/sem.2014.52.4.843
  3. Choi, S. S. (2002), A Suggestion of High Quality Concrete for PHC Pile, Magazine of the Korea Concrete Institute, 14(6), 41-48. https://doi.org/10.4334/JKCI.2002.14.1.041
  4. Chun, Y. S., Park, J. B., and Sim, Y. J. (2010), Mechanical Properties of PHC Pile Head Connection with Foundation Slab and Field Application, Magazine of the Korea Concrete Institute, 22(5), 71-77. https://doi.org/10.22636/MKCI.2010.22.5.71
  5. Hwang, Y. C., and Cho, C. H. (2005), Pile Foundations in Korea, Journal of the Korean Geotechnical Society, 21(2), 8-20.
  6. Hyun, J. H., Bang, J. W., Lee, S. S., and Kim, Y. Y. (2012), Shear strength enhancement of hollow PHC pile reinforced with infilled concrete and shear reinforcement, Journal of the Korea Concrete Institute, 24(1), 71-78. https://doi.org/10.4334/JKCI.2012.24.1.071
  7. Iskander, M., and Hassan, M. (1998), State of the Practice Review in FRP Composite Piling, Journal of Composites for Construction, 2(3), 116-120. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:3(116)
  8. Kim, H., D., Yang, J., G., Lee, J., Y., and Lee, H., D. (2014) Evaluation of the Initial Rotational Stiffness of a Double Split Tee Connection, Journal of Korean Society of Steel Construction, 26(2), 133-142. https://doi.org/10.7781/kjoss.2014.26.2.133
  9. Korean Society of Civil Engineers. (2008), Highway Bridge Design Code, Seoul, 905-915.
  10. Kwak, S., S., Kim, H., S., Jung, S., J., Hong, G., H., and Lee, K., E. (2003), An Experimental Study on Shear and Ratation Stiffness in the Connetion Parts of Shores, Journal of the Korea Concrete Institute, 15(6), 848-855. https://doi.org/10.4334/JKCI.2003.15.6.848
  11. Park, J. B., Sim, Y. J., Chun, Y. S., Park, S. S., and Park, Y. B. (2010), Assessment of Optimum Reinforcement of Rebar for Joint of PHC Pile and Foundation Plate, LHI journal, 1(1), 67-73.
  12. Song, T. E. (2008), Decision Procedure in Applying PHC Piles instead of Steel Plies, Technical Magazine Ssangyong Engineering and Construction. 48, 32-36.