References
- El-Hofy, H., Advanced Machining Processes: Nontraditional and Hybrid Machining Processes, McGraw-Hill, pp. 115-139, 2005.
- Kim, M. Y. Byiringiro, J. B. Park, J. K. and Ko, T. J., "A Study of EDM and Milling Hybrid Machining", Proceeding of KSMTE 2010 Spring Conference, pp. 24, 2010.
- Pramila, A., "Natural Frequencies of a Submerged Axially Moving Band", Journal of Sound and Vibration, Vol. 113, No. 1, pp. 198-203, 1987. https://doi.org/10.1016/S0022-460X(87)81354-8
- Wickert, J. A. amd Mote, C. D., "Classical Vibration Analysis of Axially Moving Continua", Journal of Applied Mechanics, Vol. 57, No. 3, pp. 738-744, 1990. https://doi.org/10.1115/1.2897085
- Lee, S. Y. Mote Jr. C. D., "Traveling Wave Dynamic In a Translating String Coupled To Stationary Constraints: Energy Transfer And Mode Localization", Journal of Sound and Vibration, Vol. 212, No. 1, pp. 1-22, 1998. https://doi.org/10.1006/jsvi.1997.1285
- Chae, H. J. and Lee, S. Y., "Vibration Characteristics and Tension Control of a Wire in WEDM", J. Korean Soc. Precis. Eng., Vol. 18, No. 11, pp. 86-92, 2001.
- Ryu, C. W. Choi, S. D. and Lee, S. K., "Effects of Surface Roughness in the Wire-cut Electric Discharge Cutting Conditions of the Aircraft Structural Al alloy 2024", Proceeding of KSMTE Autumn Conference 2010, pp. 420-425, 2010.
- Ryu, C. W. and Choi, S. D., "Characteristics of Surface Roughness Based on Wire Vibration and Wire-cut Electric Discharge Machining of Aluminum Alloy 6061 (I)", J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 2, pp. 59-66, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.059
Cited by
- 리드용 와이어의 Von Mises 응력 최소화를 위한 최적설계 vol.16, pp.4, 2017, https://doi.org/10.14775/ksmpe.2017.16.4.119
- A Study on Fracture Characteristics in Opening Mode of a DCB Specimen Using a Lightweight Material vol.20, pp.1, 2016, https://doi.org/10.14775/ksmpe.2021.20.01.042
- Adhesive Fracture Characteristic of DCB Specimen due to Single and Heterogeneous Materials under Tearing Load vol.20, pp.4, 2016, https://doi.org/10.14775/ksmpe.2021.20.04.127