DOI QR코드

DOI QR Code

골 절삭용 초음파 수술기의 실험적 평가에 관한 연구

A Study about Experimental Evaluation of an Ultrasonic Surgery Unit for Bone-cutting

  • Sa, Min-Woo (Department of Mechanical Engineering, Andong National UNIV.) ;
  • Shim, Hae-Ri (Department of Mechanical Engineering, Andong National UNIV.) ;
  • Ko, Tae-Jo (Department of Mechanical Engineering, Yeungnam UNIV.) ;
  • Lee, Jong-Min (R&D Center, Micro-NX, LTD.) ;
  • Kim, Jong Young (Department of Mechanical Engineering, Andong National UNIV.)
  • 투고 : 2015.12.10
  • 심사 : 2015.12.17
  • 발행 : 2016.02.29

초록

In the dentistry field, an ultrasonic surgery unit is widely used in bone cutting and scaling to reduce operation time and minimize hemorrhage. The purpose of this study was to evaluate bone cutting and the effect of a specimen's temperature on the two-type ultrasonic surgery unit using a handpiece moving system(HMS). A HMS, which can cut the bone, was developed to perform the experimental procedure with precision of motion control. Bone specimens were prepared from a combination of epoxy-hardener and cortical bone of bovine leg. Through the bone-cutting experiment, the cutting depth was evaluated by not only scanning electron microscopy, but also Vernier calipers. Also, the temperature distribution was measured by a thermo-graphic camera. This study may be applied methodically in various experimental evaluations on a performance test by a HMS.

키워드

참고문헌

  1. Vercellotti, T., "Technological characteristics and clinical indications of piezoelectric bone surgery," Miverva Stomatologica, Vol. 53, No. 5, pp. 207-214, 2004.
  2. Li, C. P., Kim, M. Y., Park, J. K. and Ko, T. J., "A Study on the Development of Rotary Ultrasonic Machining Spindle," J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 4, pp. 160-166, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.160
  3. Son D. S., Clinical Applications of Piezoelectric Bone Surgery, Koonja Publisher, 2008.
  4. Lee, H. C., Kim, B. J., and Yun, M. S., "On-site Sinus Compaction technique (Crestally approached sinus graft using piezoelectric device)," J. Dent. Implant Res., Vol. 27, No. 2, pp. 17-30, 2008.
  5. Harder, S., Wolfart, S., Mehl, C. and Kern, M., "Performance of Ultrasonic Devices for Bone Surgery and Associated Intraosseous Temperature Development," Int. J. Oral Maxillofac. Implants, Vol. 24, No. 3, pp. 484-490, 2009.
  6. Grunder, U. and J. R. Strub. "Die Problematik der Temperaturehöhung beim Bearbeiton des Knochens mit rotierenden Instrumenten/eine Literaturübersicht." Schweiz Monatsschr Zahnmed, Vol. 96, No. 8, pp. 956-959, 1986.
  7. Lee, S. M., Chae, S. S., Lee, J. K., Choi, H. and Lee, J. C., "A Study on the Drilling Characteristics for Implant Procedure Drill," J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 2, pp. 49-54, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.049
  8. Eriksson A. R., Albrektsson, T. and Albrektsson. B., "Heat caused by drilling cortical bone: Temperature measured in vivo in patients and animals", Acta Orthop. Scand., Vol. 55, No. 6, pp. 629-631, 1984. https://doi.org/10.3109/17453678408992410