품질경영학회지 (Journal of Korean Society for Quality Management)

  • 제44권1호
  • /
  • Pages.77-94
  • /
  • 2016
  • /
  • 1229-1889(pISSN)
  • /
  • 2287-9005(eISSN)
한국품질경영학회 (Korean Society for Quality Management)
권호 표지
DOI QR코드

DOI QR Code

Type 1 Study, Gage R&R Study와 ISO 22514-7의 측정능력지수 간 연관성 분석

Some Relationships between Measurement Capability Indices of Type 1 Study, Gage R&R Study, and ISO 22514-7

  • 이승훈 (동의대학교 산업경영공학과) ;
  • 임근 (동의대학교 산업경영공학과)
  • Lee, Seung-Hoon (Dept. of Industrial & Management Engineering, Dong-Eui University) ;
  • Lim, Keun (Dept. of Industrial & Management Engineering, Dong-Eui University)
  • 투고 : 2015.12.04
  • 심사 : 2015.12.21
  • 발행 : 2016.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: This paper reviews Type 1 Gage study, Gage R&R study, and procedure of ISO 22514-7 for assessing a measurement system, and discusses some relationships between the measurement capability indices. Methods: The gage capability index $C_g$ of Type 1 Gage study, precision-to-tolerance ratio PTR of Gage R&R study, and measurement performance ratio $Q_{MS}$ and $Q_{MP}$ of ISO 22514-7 are considered in this paper. Results: This paper derives the relationships between $C_g$ and $Q_{MS}$, PTR and $Q_{MP}$, and $Q_{MS}$ and $Q_{MP}$, respectively, and discusses the acceptance conditions for each procedures. Conclusion: The measurement capability analysis is the first step for the quality improvement of the manufacturing processes. Therefore the result of this study provides a helpful guidelines for assessing the measurement system, enabling proper evaluation of manufacturing processes.

키워드

참고문헌

  1. Al-Rafaie, Abbas, and Bata, Nour. 2010. "Evaluating Measurement and Process Capabilities by GR&R with Four Quality Measures." Measurement 43:842-851. https://doi.org/10.1016/j.measurement.2010.02.016
  2. Automotive Industry Action Group(AIAG). 2010. Measurement Systems Analysis, 4th ed. Michigan, USA.
  3. Bosch. 2003. Bosch Booklet 10: Capability of Measurement and Test Procedures.
  4. Chang, Mu Sung, and Kim, Sang Bu. 2007. "Estimations of Measurement System Variability and PTR under Nonnormal Measurement Error." Journal of the Korean Society for Quality Management 35: 10-9.
  5. GM. 2010. Measurement Systems Specification Document: SP-Q-MSS, http://www.q-das.com/uploads/tx_sbdownloader/SP-Q-MSS_Final_08-JAN-2010_vG2_01.pdf.
  6. International Organization for Standardization(ISO). 2005. ISO/IEC 17025, General Requirements for the Competence of Testing and Calibration Laboratories, Geneva, Switzerland.
  7. International Organization for Standardization(ISO). 2007. ISO/IEC Guide 99, International Vocabulary of Metrology-Basic and General Concepts and Associated Terms (VIM), Geneva, Switzerland.
  8. International Organization for Standardization(ISO). 2008. ISO/IEC Guide 98-3, Guide to the Expression of the Uncertainty in Measurement (GUM), Geneva, Switzerland.
  9. International Organization for Standardization(ISO). 2012. ISO 22514-7, Statistical Methods in Process Management-Capability and Performance-Part 7: Capability of Measurement Processes, Geneva, Switzerland.
  10. Korean Agency for Technology and Standards. 2012. KS Q ISO 22514-1, Statistical Methods in Process Management-Capability and Performance-Part 1: General Principles and Concepts.
  11. Korean Agency for Technology and Standards. 2014. KS Q ISO 22514-2, Statistical Methods in Process Management-Capability and Performance-Part 2: Process Capability and Performance of Time-Dependent Process Models.
  12. Korean Agency for Technology and Standards. 2011. KS Q ISO 22514-3, Statistical Methods in Process Management-Capability and Performance-Part 3: Machine Performance Studies for Measured Data on Discrete Parts.
  13. Korean Agency for Technology and Standards. 2011. KS Q ISO/TR 22514-4, Statistical Methods in Process Management-Capability and Performance-Part 4: Process Capability Estimates and Performance Measures.
  14. Lee, Seung-Hoon, and Lee, Jong-Hwan. 2000. "A Statistical Software for Measurement Systems Analysis." Journal of the Korean Society for Quality Management 28:175-195.
  15. Majeske, Karl D., and Andrews, Richard W. 2002. "Evaluating Measurement Systems and Manufacturing Processes Using Three Quality Measures." Quality Engineering 15:243-251. https://doi.org/10.1081/QEN-120015856
  16. Seo, Sun-Keun. 2014. "Two-Dimensional Assessment for Measurement System Analysis." Journal of the Korean Society for Quality Management 42:607-616. https://doi.org/10.7469/JKSQM.2014.42.4.607
  17. Verband der Automobilindustrie(VDA). 2011. VDA Volume 5-Capability of Measurement Processes, 2nd ed. Berlin, Germany.
  18. White, T. Kelvin, and Borror, Connie M. 2011. "Two-Dimensional Guidelines for Measurement System Indices." Journal of Quality Technology 27:479-487.
  19. Woodall, William H., and Borror, Connie M. 2008. "Some Relationships between Gage R&R Criteria." Quality and Reliability Engineering International 24:99-106. https://doi.org/10.1002/qre.870