DOI QR코드

DOI QR Code

Probabilistic-based assessment of composite steel-concrete structures through an innovative framework

  • Matos, Jose C. (ISISE, Department of Civil Engineering, School of Engineering, University of Minho) ;
  • Valente, Isabel B. (ISISE, Department of Civil Engineering, School of Engineering, University of Minho) ;
  • Cruz, Paulo J.S. (Lab2PT, School of Architecture, University of Minho) ;
  • Moreira, Vicente N. (ISISE, Department of Civil Engineering, School of Engineering, University of Minho)
  • 투고 : 2015.10.10
  • 심사 : 2016.02.19
  • 발행 : 2016.04.30

초록

This paper presents the probabilistic-based assessment of composite steel-concrete structures through an innovative framework. This framework combines model identification and reliability assessment procedures. The paper starts by describing current structural assessment algorithms and the most relevant uncertainty sources. The developed model identification algorithm is then presented. During this procedure, the model parameters are automatically adjusted, so that the numerical results best fit the experimental data. Modelling and measurement errors are respectively incorporated in this algorithm. The reliability assessment procedure aims to assess the structure performance, considering randomness in model parameters. Since monitoring and characterization tests are common measures to control and acquire information about those parameters, a Bayesian inference procedure is incorporated to update the reliability assessment. The framework is then tested with a set of composite steel-concrete beams, which behavior is complex. The experimental tests, as well as the developed numerical model and the obtained results from the proposed framework, are respectively present.

키워드

참고문헌

  1. Barbato, M., Zona, A. and Conte, J. (2014), "Probabilistic nonlinear response analysis of steel-concrete composite beams", J. Struct. Eng., 140(1), 04013034. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000803
  2. Bergmeister, K., Novak, D., Pukl, R. and Cervenka, V. (2009), "Structural assessment and reliability analysis for existing engineering structures, theoretical background", Struct. Infra. Eng., 5(4), 267-275. https://doi.org/10.1080/15732470601185612
  3. Bernardo, J.M. and Smith, A.F.M. (2004), Bayesian Theory, John Wiley & Sons, Ltd., Chichestc, England, Chichestc, England.
  4. Beyer, H.-G. and Schwefel, H.-P. (2002), "Evolution strategies-A comprehensive introduction", Natural Comput., 1(1), 3-52. https://doi.org/10.1023/A:1015059928466
  5. Casas, J.R. and Wisniewski, D. (2011), "Safety requirements and probabilistic models of resistance in the assessment of existing railway bridges", Struct. Infra. Eng., 9(6), 529-545. https://doi.org/10.1080/15732479.2011.581673
  6. Caspeele, R. and Taerwe, L. (2014), "Influence of concrete strength estimation on the structural safety assessment of existing structures", Construct. Build. Mater., 62, 77-84. https://doi.org/10.1016/j.conbuildmat.2014.03.033
  7. Cervenka, V., Jendele, L. and Cervenka, J. (2009), ATENA(R) Program Documentation, Part 1: Theory, Prague, Czech Republic.
  8. EN 1992-1-1 (2004), Eurocode 2: Design of concrete structures-Part 1-1: General rules and rules for buildings,;European Committee for Standardization (CEN), Brussels, Belgium.
  9. EN 1993-1-1 (2010), Eurocode 3: Design of steel structures-Part 1-1: General rules and rules for buildings; European Committee for Standardization (CEN), Brussels, Belgium.
  10. EN 1994-1-1 (2004), Eurocode 4: Design of composite steel and concrete structures-Part 1-1: General Rules and Rules for Buildings; European Committee for Standardization CEN, Brussels, Belgium.
  11. EN 10025-1 (2004), Hot rolled products of structural steels. Part 1: General technical delivery conditions; European Committee for Standardization (CEN), Brussels, Belgium.
  12. EN 10025-2 (2004), European structural steel standard: Grade designations, properties and nearest equivalents; European Committee for Standardization (CEN), Brussels, Belgium.
  13. Enright, M.P. and Frangopol, D.M. (1999), "Reliability-based condition assessment of deteriorating concrete bridges considering load redistribution", Struct. Safety, 21(2), 159-195. https://doi.org/10.1016/S0167-4730(99)00015-6
  14. Enevoldsen, I. (2001), "Experience with probabilistic-based assessment of bridges", Struct. Eng. Int., 11(4), 251-260. https://doi.org/10.2749/101686601780346814
  15. EuroLightCon (2000), Mechanical Properties of LWAC compared with both NWC and HSC; BE96-3942/R27, EuroLightCon-Economic Design and Construction with Lightweight Aggregate Concrete.
  16. Goulet, J.-A., Kripakaran, P. and Smith, I.F.C. (2009), Estimation of Modelling Errors in Structural System Identification, Zurich, Switzerland.
  17. Henriques, A.A.R. (1998), "Application of new safety concepts in the design of structural concrete (Aplicacao de novos conceitos de seguranca no dimensionamento do betao estrutural)", Ph.D. Dissertation; Universidade do Porto, Porto, Portugal. [In Portuguese]
  18. Iman, R.L. and Conover, W.J. (1982), "A distribution-free approach to inducing rank correlation among input variables", Commun. Statistics-Simul. Comput., 11(3), 311-334. https://doi.org/10.1080/03610918208812265
  19. Jacinto, L.A. (2011), "Safety assessment of existing bridges-Bayesian probabilistic approach (Avaliacao da Seguranca de Pontes Existentes-Abordagem Probabilistica Bayesiana)", Ph.D. Dissertation; Universidade Nova de Lisboa, Lisboa, Portugal. [In Portuguese]
  20. JCGM (2008), Evaluation of measurement data-Guide to the expression of uncertainty in measurement, JCGM 100:2008.
  21. JCSS, J.C.o.S.S. (2001), Probabilistic Model Code, (12th Draft), JCSS-Joint Committee on Structural Safety.
  22. Leming, M.L. (1988), "Properties of high strength concrete-An investigation of high strength concrete characteristics using materials in North Carolina", 23241-86-3; North Carolina State University, Raleigh, NC, USA.
  23. Matos, J.C. (2013), Uncertainty Evaluation of Reinforced Concrete and Composite Structures Behavior, Ph.D. Dissertation; Escola de Engenharia, Guimaraes, Portugal.
  24. Matos, J.C., Valente, M.I.B., Neves, L.C. and Cruz, P.J.S. (2011), Avaliacao probabilistica do comportamento ate a rotura de estruturas: aplicacao a vigas mistas, Guimaraes, Portugal.
  25. Matos, J.C., Valente, M.I.B., Cruz, P.J.S. and Neves, L.C. (2012), Uncertainty Evaluation of the Behavior of a Composite Beam, Lake Maggiore-Italy.
  26. Matos, J.C., Cruz, P.J.S., Valente, I.B., Neves, L.C. and Moreira, V.N. (2015), "An innovative framework for probabilistic-based structural assessment with an application to existing reinforced concrete structures", Eng. Struct., 111, 552-564.
  27. Mujagic, J.R.U. and Easterling, W.S. (2009), "Reliability assessment of composite beams", J. Construct. Steel Res., 65(12), 2111-2128. https://doi.org/10.1016/j.jcsr.2009.07.007
  28. Nowak, A.S., Szersen, M.M., Szeliga, E.K., Szwed, A. and Podhorecki, P.J. (2008), "Reliability-based calibration for structural concrete, Phase 3", PCA R&D Serial No. 2849; Portland Cement Association.
  29. Olsson, A., Sandberg, G. and Dahlblom, O. (2003), "On Latin hypercube sampling for structural reliability analysis", Structural Safety. 25(1), 47-68. https://doi.org/10.1016/S0167-4730(02)00039-5
  30. Roik, E.H.K., Hanswille, G. and Lanna, A.C.-O. (1989), "Report on Eurocode 4. Clause 6.3.2.: Stud Connectors, Harmonisation of the European Construction Codes, Eurocode 3, 4 and 8 / part 3", EC4/8/88, Institut fur Konstruktiven Ingenieurbau.
  31. Rucker, W., Hille, F. and Rohrmann, R. (2006), "F08a-Guideline for the Assessment of Existing Structures", Federal Institute of Materials Research and Testing (BAM).
  32. Shields, M.D., Teferra, K., Hapij, A. and Daddazio, R.P. (2015), "Refined Stratified Sampling for efficient Monte Carlo based uncertainty quantification", Reliability Engineering & System Safety. 142,310-325. https://doi.org/10.1016/j.ress.2015.05.023
  33. Strauss, A., Frangopol, D.M. and Kim, S. (2008), "Use of monitoring extreme data for the performance prediction of structures: Bayesian updating", Eng. Struct., 30(12), 3654-3666. https://doi.org/10.1016/j.engstruct.2008.06.009
  34. Valente, I.B. (2007), Experimental studies on shear connection systems in steel and lightweight concrete composite bridges, Ph.D. Dissertation, University of Minho, Guimaraes, Portugal.
  35. Valente, I.B. and Cruz, P.J. (2010), "Experimental analysis on steel and lightweight concrete composite beams", Steel and Composite Structures. 10(2), 169-185. https://doi.org/10.12989/scs.2010.10.2.169
  36. Valum, R. and Nilsskog, J.E. (1999), Production and Quality Control of High Performance Lightweight Concrete for the Raftsundet Bridge, Sandefjord, Norway.
  37. Zona, A., Barbato, M. and Conte, J.P. (2006), "Finite element response sensitivity analysis of continuous steel-concrete composite girders", Steel Compos. Struct., Int. J., 6(3), 183-202. https://doi.org/10.12989/scs.2006.6.3.183
  38. Zona, A., Barbato, M., Dall'Asta, A. and Dezi, L. (2010), "Probabilistic analysis for design assessment of continuous steel-concrete composite girders", J. Construct. Steel Res., 66(7), 897-905. https://doi.org/10.1016/j.jcsr.2010.01.015

피인용 문헌

  1. Probabilistic-based assessment of a masonry arch bridge considering inferential procedures vol.134, 2017, https://doi.org/10.1016/j.engstruct.2016.11.067
  2. Optimum design of a composite floor system considering environmental and economic impacts vol.15, pp.3, 2016, https://doi.org/10.1590/s1983-41952022000300002