International Journal of Fluid Machinery and Systems

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Analysis of Damping Effect of Liquid Film on Material in High Speed Liquid Droplet Impingement

  • Sasaki, Hirotoshi (Graduate School of Engineering, Tohoku University) ;
  • Ochiai, Naoya (Institute of Fluid Science, Tohoku University) ;
  • Iga, Yuka (Institute of Fluid Science, Tohoku University)
  • Received : 2015.11.27
  • Accepted : 2016.12.21
  • Published : 2016.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

By high speed Liquid Droplet Impingement (LDI) on material, fluid systems are seriously damaged, therefore, it is important for the solution of the erosion problem of fluid systems to consider the effect of material in LDI. In this study, by using an in-house fluid/material two-way coupled method which considers reflection and transmission of pressure, stress and velocity on the fluid/material interface, high-speed LDI on wet/dry material surface is simulated. As a result, in the case of LDI on wet surface, maximum equivalent stress are less than those of dry surface due to damping effect of liquid film. Empirical formula of the damping effect function is formulated with the fluid factors of LDI, which are impingement velocity, droplet diameter and thickness of liquid film on material surface.

Keywords

References

  1. Press release of Tohoku Electric Power, 2007, "Investigation and Preventive Steps of Vent Piping System Feedwater Heater 2 of Onagawa Nuclear Power Station Unit 2, Dec. 12th, (in Japanese).
  2. Heymann, F. J., 1979, "Conclusions from the ASTM interlaboratory test program with liquid impact erosion facilities", Proc. 5th Int. Conf. on Erosion by Liquid and Solid Impact, pp. 20-1-20-10.
  3. Sanchez-Caldera, L. E., 1984, "The Mechanism of Corrosion-Erosion in Steam Extraction Lines of Power Stations", Ph. D. Thesis. Dep. Mech. Eng., Massachusetts Institute of Technology.
  4. Hattori, S., Hayakawa, H. and Takinami, M., 2008, "Liquid Impingement Erosion of Steels", Proc. 13th Forefront of Power and Energy Systems Symposium, JSME, pp. 37-40 (in Japanese).
  5. Fujisawa, N., Yamagata, T., Hayashi, K. and Takano, T., 2012, "Experiments on Liquid Droplet Impingement Erosion by High-Speed Spray", Nucl. Eng. Des., Vol. 250, pp. 101-107. https://doi.org/10.1016/j.nucengdes.2012.06.022
  6. Fujisawa, N., Yamagata, T., Saito, K. and Hayashi, K., 2013, "The effect of liquid film on liquid droplet impingement erosion", Nucl. Eng. Des., Vol. 265, pp. 909-917. https://doi.org/10.1016/j.nucengdes.2013.07.039
  7. Sasaki, H., Iga, Y., and Ikohagi, T., 2010, "Study of Droplet Impingement Phenomena by Fluid/Solid Coupled Simulation", Proc. Joint Int. Conf. on Supercomputing in Nuclear Applications and Monte Carlo 2010, Paper No. 10189.
  8. Okuda, K. and Ikohagi, T., 1996, "Numerical Simulation of Collapsing Behavior of Bubble Clouds", Trans. JSME, Ser. B., Vol. 62 (603), pp. 3792-3797 (in Japanese). https://doi.org/10.1299/kikaib.62.3792
  9. Iga, Y. and Konno, T., 2012, "Numerical Analysis of the Influence of Acceleration on Cavitation Instabilities that arise in Cascade", International Journal of Fluid Machinery and Systems, Vol. 5, No. 1 (January - March), pp. 1-9. https://doi.org/10.5293/IJFMS.2011.5.1.001
  10. Brackball, J. U., Kothe, D. B. and Zemach, C., 1992, "A Continuum Method for Modeling Surface Tension", J. Comp. Phys., Vol. 100 (2), pp. 335-354. https://doi.org/10.1016/0021-9991(92)90240-Y
  11. Nakamori, I. and Ikohagi, T., 2002, "Numerical Method for Cavitating Flow with Phase Change", Proc. 5th JSME/KSME Fluids Eng. Conf., Paper No. 322.
  12. Fujikawa, S., and Akamatsu, T., 1980, "Effects of the Non-equilibrium Condensation of Vapor on the Pressure Wave Produced by the Collapse of a Bubble in a Liquid", J. Fluid Mech., Vol. 97, pp. 481-512. https://doi.org/10.1017/S0022112080002662
  13. Sugawara, S., 1932, "New Steam Tables", JSME, Vol. 35 (186), pp. 999-1004, (in Japanese).
  14. Takano, Y., Goto, T. and Nishino, S., 1998, "A Finite Volume Scheme for Elastodynamic Equations (1st Report, Algorithm for Elastodynamics)", JSME. Ser. A., Vol. 64 (626), pp. 2471-2476 (in Japanese). https://doi.org/10.1299/kikaia.64.2471
  15. Shima, E. and Jounouchi, T., 1994, "Role of Computational Fluid Dynamics in Aeronautical Engineering (No.12) - Formulation and Verification of Uni - Particle Upwind Schemes for the Euler Equations -", NAL-SP27, Proc. 12th NAL Symp. on Aircraft Computational Aerodynamics, pp. 255-260.
  16. Edwards, J. R., Franklin, R. and Liou, M., 2000, "Low-Diffusion Flux-Splitting Methods for Real Fluid Flows with Phase Transitions", AIAA J., Vol. 38 (9), 1624-1633. https://doi.org/10.2514/2.1145
  17. Godunov, S. K., 1959, "A Difference Method for Numerical Calculation of Discontinuous Solutions of the Equations of Hydrodynamics", Matematicheskii Sbornik, Vol. 47 (89), No. 3, pp. 271-306.
  18. Yasuda, K., 2004, "Mechanical Acoustics", CORONA PUBLISHING CO., LTD., Tokyo (in Japanese).

Cited by

  1. Research on fine boring simulation based on squeezed liquid film damper vol.2018, pp.1, 2018, https://doi.org/10.1186/s13638-018-1164-8
  2. Removal Mechanism of Artificial Dental Plaque by Impact of Micro-Droplets vol.8, pp.2, 2019, https://doi.org/10.1149/2.0091902jss