References
- Lin, Y. Z., Huang, G. Y., 2014,"Overview of research status on hydraulic rock drill," Hydraulic Pneumatics &Seals, Vol. 34, No. 2, pp. 1-4.
- Oh, J.Y., Lee, G.H., Kang, H.S, et al, 2012, "Modeling and performance analysis of rock drill drifters for rock stiffness," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 12, pp. 2187-2193. https://doi.org/10.1007/s12541-012-0290-1
- Li X. B., Zhou Z. R., 2005, "Comparative analysis and development trend of rock drill," Engineering Sciences, Vol. 3, No. 9, pp. 81-84.
- Chiang L. E., 2004, "Dynamic force-penetration curves in rock by matching theoretical to experimental wave propagation response," Experimental Mechanics, Vol. 34, No. 2, pp. 167-175.
- Russell, A. C., 2014, "Rigs, rods and bits review," Engineering and Mining Journal, Vol. 215, No. 3, pp. 38-41.
- Hu Q., Yang C. H., 2014, "Dynamic simulation and test research of impact performance of hydraulic rock drill with no constant-pressurized chamber," Automation in Construction, Vol. 37, No. 1, pp. 211-216. https://doi.org/10.1016/j.autcon.2013.08.011
- He Q. H., 1995, "Theoretical analysis and design/calculation formulae for hydraulic impact mechanism," Transactions of Nonferrous Metals Society of China, Vol. 5, No. 1, pp. 116-121.
- Song, C. H., Kwon, K. B., Cho, M. G., et al, 2015, "Development of lab-scale rock drill apparatus for testing performance of a drill bit," International Journal of Precision Engineering and Manufacturing, Vol. 16,No. 7,pp. 1405-1414. https://doi.org/10.1007/s12541-015-0185-z
- Kwon, K. B., Song, C. H., Park, J. Y, et al, 2014, "Evaluation of drilling efficiency by percussion testing of a drill bit with new button arrangement," International journal of precision engineering and manufacturing, Vol. 15, No. 6, pp. 1063-1068. https://doi.org/10.1007/s12541-014-0437-3
- Chen J. W., 2014, "Development of YZ45 high frequency hydraulic rock drill drifter," Jianglu Machinery Electronics Group Co., LTD, Xiangtan.
- Lundberg B., Okrouhlik M., 2006, "Efficiency of a percussive rock drilling process with consideration of wave energy radiation into the rock," International Journal of Impact Engineering, Vol. 32, No. 10, pp. 1573-1583. https://doi.org/10.1016/j.ijimpeng.2005.02.001
- Lee, T. S., Low, H. T., Nguyen, D. T., et al, 2008, "Experimental study of check valves in pumping systems with air entrainment," International Journal of Fluid Machinery and Systems, Vol. 1, No.1, pp.140-147. https://doi.org/10.5293/IJFMS.2008.1.1.140
- Van, T. T., Yang, B. S., 2009, "Machine fault diagnosis and prognosis: the state of the art," International Journal of Fluid Machinery and Systems, Vol. 2, No. 1, pp. 61-71. https://doi.org/10.5293/IJFMS.2009.2.1.061
- Shih, T. I., 2008, " Control of shock-wave/bound-layer interactions by bleed," International Journal of Fluid Machinery and Systems, Vol. 1, No. 1, pp. 24-32. https://doi.org/10.5293/IJFMS.2008.1.1.024
- Lundberg B., Henchoz A., 1977, "Analysis of elastic waves form two-point strain measurement," Experimental Mechanics, Vol. 24, No. 2, pp. 67-75.
- Park S. W., Zhou M., 1999, "Separation of elastic waves in split Hopkinson bars using one-point strain measurements," Experimental Mechanics ,Vol. 39, No. 4, pp. 287-294. https://doi.org/10.1007/BF02329807
- Elias E. A., Chiang L.E., 2003, "Dynamic analysis of impact tools by using a method based on stress wave propagation and impulse-momentum principle," Journal of Mechanical Design, Vol. 125, No 1, pp. 131-142. https://doi.org/10.1115/1.1539509