International Journal of Fluid Machinery and Systems

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

Robust Design of Main Control Valve for Hydraulic Pile Hammer Flexible Control System

  • Guo, Yong (Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan university of science and technology) ;
  • Hu, Jun Ping (Mechanical Engineering Department, Central South University) ;
  • Zhang, Long Yan (Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan university of science and technology)
  • 투고 : 2015.01.12
  • 심사 : 2015.05.19
  • 발행 : 2016.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The flexible control system for hydraulic pile hammer using main control valve is present to the requirement of rapidly reversing with high frequency. To ensure the working reliability of hydraulic pile hammer, the reversing performance of the main control valve should commutate robustness to various interfere factors. Through simulation model built in Simulink/Stateflow and experiment, the effects of relative parameters to reverse performance of main control are analyzed and the main interfere factors for reversing performance are acquired. Treating reverse required time as design objects, some structure parameters as control factors, control pressure, input flow and gaps between spool and valve body as interfere factors, the robust design of the main control valve is done. The combination of factors with the strongest anti-jamming capability is acquired which ensured the reliability and anti-jamming capability of the main control valve. It also provides guidance on design and application of the main control valve used in large flow control with interferes.

키워드

참고문헌

  1. Donald, L. B., Jams, W. W., and Kathleen, I. F., 1997, "Pile driving equipment," Engineering and Construction Army Corps of Engineers, Washington, UFC 3-220-02P.
  2. Patrick, D. B., Mark, T., and David, H., 2008, US Patent No. 7404449B2.
  3. James, E. A., 2009, US Patent No. 20100012336A1.
  4. Iskander, M., 2011, Behavior of Pipe Piles in Sand, Berlin.
  5. Lu, J.Z., Sui, Z., Yang,Y. H., et al, 2004, "Hydro-pneumatic driving system of new type hydraulic pile hammer," Journal of Jilin University of Technology(Natural Science Edition), Vol. 34, No. 4, pp. 597-601.
  6. Hu, J. P., Guo,Y., Song, G. W., et al. 2010, "Numerical analysis for impact model of pile hammer," China Journal of Highway and Transport, Vol. 23, No. 2, pp. 122-126.
  7. Yang, Y. H., Wang, X. L., Lu, J.Z., et al, 2005, "Study on performance evaluation system and testing methods of hydraulic pile hammer," Transactions of The Chinese Society of Agricultural Machinery, Vol. 36, No. 4, pp. 597-601.
  8. Hu, J. P., Shi, T. L., and Zhang, L., 2009, "Simulation of a new type hydro-pneumatic hydraulic pile hammer," Computer Simulation, Vol. 26, No. 8, pp. 274-277.
  9. Yang G. P., 2006, "Research of a full hydraulic pressure hydraulic impactor with strike energy and frequency adjusted independently," Journal of Hunan University of Science & Technology(Natural Science Edition),Vol. 21, No. 1, pp. 25-29.
  10. Angadi, S. V., Jackson, a., Song, Y. C, et al, 2009, "Reliability and life study of hydraulic solenoid valve," Engineering Failure Analysis, Vol. 16, No. 1, pp. 874-887. https://doi.org/10.1016/j.engfailanal.2008.08.011
  11. Sumio, S., Keita, D., Masaaki, T., Gaku, H. J., Takuya, I., 2012, "Effects of the lift valve opening area on water hammer pump performance and flow behavior in the valve chamber," International Journal of Fluid Machinery and Systems, Vol. 5, No.3, pp. 117-125. https://doi.org/10.5293/IJFMS.2012.5.3.117
  12. Li, P. Y., 2002, "Dynamic redesign of a flow control servo valve using a pressure control pilot," Journal of Dynamic Systems Measurement and Control, Vol. 124, No. 1, pp.428-434. https://doi.org/10.1115/1.1485288
  13. Om, P. Y., Nanua, S., Ratna, B. C., et al, 2003, "A fuzzy logic based approach to reliability improvement estimation during product development," Reliability Engineering & System Safety, Vol. 80, No.1, pp. 63-74. https://doi.org/10.1016/S0951-8320(02)00268-5
  14. Aditya, A., Gyula, S., and Gabor, K., 2004, "Semantic translation of Simulink/Stateflow models to hybrid automata using graph transformations," Electronic Notes in Theoretical Computer Science, Vol. 109, No. 14, pp. 43-56. https://doi.org/10.1016/j.entcs.2004.02.055
  15. Jia, Q. L., Yun, D. L., and Luan, Y. F., 2006, System simulation and design based on MATLAB7.x\Simulink\Stateflow, Northwest industrial university press, Xian.
  16. Cheng, D. X., 2004, Handbook of mechanic design (volume4), Chemical industry press, Beijing.
  17. Wu, C.E., and Hamada, M., 2000, Experiments: Planning, analysis, and parameter design and optimization, John Wiley & Sons, New York.