대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제42권2호
  • /
  • Pages.122-128
  • /
  • 2016
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지
DOI QR코드

DOI QR Code

근골격계 질환 예방을 위한 견인곡사포 고각조정 방법의 개선

Improvement of Firing Elevation Driving Method for Towed Howitzer to Prevent Musculoskeletal Problems

  • 투고 : 2015.08.11
  • 심사 : 2015.12.22
  • 발행 : 2016.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study is to improve the firing elevation driving method for towed howitzer to prevent the musculoskeletal disorders. To adjust the firing elevation, it is required to rotate the hand wheel and this work has been done manually in the firing test range as the same method as field artillery troops. In the firing test range, the motor-driven firing elevation adjustment device was developed to improve the working efficiency and safety. These were compared by using posture classification scheme of RULA and REBA. It was measured elapsed time to investigate the improved operational efficiency. The optimal posture of upper body to operate the hand wheel for field artillery troops was proposed.

키워드

참고문헌

  1. Choi, C. B., Koo, L. J., Jung, M. C., and Park, P. (2006), A study about steering wheel and pedal position of industrial vehicle by the various body dimensions, Journal of the Society of Korea Industrial and Systems Engineering, 29(4), 1-7.
  2. Choi, H. J. (2008), A study of the variation of muscle fatigue by the auxiliary equipment of steering in forklift, Master's thesis, Daegu University, Kyungsan, Korea.
  3. Jung, D. C. (2006), Preventive exercises for preventing shoulder injuries, Health and Sports Medicine, Official Journal of KACEP, 8(2), 103-112.
  4. KATS (2010), Body Dimension's on the Korean(6th), http://sizekorea.kats.go.kr/.
  5. Kee, D. H. and Park, K. H. (2005), Comparison of posture classification schemes of OWAS, RULA and REBA, Journal of the KOSOS, 20(2), 127-132.
  6. Kim, K. S., Park, J. K., and Kim, D. S. (2010), Status and characteristics of occurrence of work-related musculoskeletal disorders, Journal of the Ergonomics Society of Korea, 29(4), 405-422. https://doi.org/10.5143/JESK.2010.29.4.405
  7. Kim, Y. H. and Tak, T. O. (2011), Biomechanical analysis of arm motion during steering using motion analysis technique, Trans. Korean Soc. Mech. Eng. A, 35(11), 1391-1398. https://doi.org/10.3795/KSME-A.2011.35.11.1391
  8. Occupational Heanth and Safety Council of Ontario(OHSCO) (2007), Part 1 : MSD Prevention Guideline for Ontario.
  9. Park, J. Y. and Seo, J. B. (2008), Visiting pattern of outpatient clinics and concordance of diagnosis in rotator cuff disorder, J. Korean Orthop. Assoc., 43, 187-192. https://doi.org/10.4055/jkoa.2008.43.2.187
  10. Seo, S. L. and Im, W. H. (2001), The EMG measurement of simple and iterative worker's muscle fatigue, Journal of the Korea Industrial Information System Society, 6(3), 79-86.
  11. Seo, S. L. and Im, W. H. (2001), The CTD evaluation of simple and iterative task through the improvement of working conditions, Journal of the Korea Industrial Information System Society, 6(4), 12-21.
  12. Son, J. S. (2004), Analysis of driving posture and pedal placement for the various body dimensions of forklift driver, Master's thesis, Ajou University, Suwon, Korea
  13. Song, J. H. (2005), The Study of Recovery Time for Muscle Fatigue following Simple Repetitive Works, Master's thesis, Daegu University, Kyungsan, Korea.
  14. Yadav, R., Prasad, N., and Pund, S. (2007), Design guidelines for tractor workplace based on Indian anthropometry, Agriculture Ergonomics Dev. Conference(AEDec), Kaula Lumpur, Malaysia.