DOI QR코드

DOI QR Code

A study on the improvements of geotechnical properties of in-situ soils by grouting

  • Chang, Muhsiung (Construction Engineering Department, National Yunlin University of Science & Technology) ;
  • Mao, Tze-wen (Construction Engineering Department, National Yunlin University of Science & Technology) ;
  • Huang, Ren-chung (Construction Engineering Department, National Yunlin University of Science & Technology)
  • 투고 : 2014.09.18
  • 심사 : 2016.01.24
  • 발행 : 2016.04.25

초록

This paper discusses improvements of compressibility, permeability, static and liquefaction strengths of in-situ soils by grouting. Both field testing and laboratory evaluation of the on-site samples were conducted. The improvement of soils was influenced by two main factors, i.e., the grout materials and the injection mechanisms introduced by the field grouting. On-site grout mapping revealed the major mechanism was fracturing accompanied with some permeation at deeper zones of sandy soils, where long-gel time suspension grout and solution grout were applied. The study found the compressibility and swelling potential of CL soils at a 0.5 m distance to grout hole could be reduced by 25% and 50%, respectively, due to the grouting. The effect on hydraulic conductivity of the CL soils appeared insignificant. The grouting slightly improved the cohesion of the CL soils by 10~15 kPa, and the friction angle appeared unaffected. The grouting had also improved the cohesion of the on-site SM soils by 10~90 kPa, while influences on the friction angle of soils were uncertain. Liquefaction resistances could be enhanced for the sandy soils within a 2~3 m extent to the grout hole. Average improvements of 40% and 20% on the liquefaction resistance were achievable for the sandy soils for earthquake magnitudes of 6 and ${\geq}7.5$, respectively, by the grouting.

키워드

과제정보

연구 과제 주관 기관 : National Science Council of Taiwan, Diffisoil Geotechnical Engineering Co., National Yunlin University of Science & Technology (NYUST) of Taiwan

참고문헌

  1. Akiyama, M. and Kawasaki, S. (2012), "Improvement in the unconfined compressive strength of sand test pieces cemented with calcium phosphate compound by addition of calcium carbonate", Ecolog. Eng., 47, 264-267. https://doi.org/10.1016/j.ecoleng.2012.07.008
  2. Anagnostopoulos, C.A. (2005), "Laboratory study of an injected granular soil with polymer grouts", Tunnel. Underg. Space Tech., 20(6), 525-533. https://doi.org/10.1016/j.tust.2005.04.005
  3. Anagnostopoulos, C.A. (2014), "Effect of different superplasticisers on the physical and mechanical properties of cement grouts", Construct. Build. Mater., 50, 162-168. https://doi.org/10.1016/j.conbuildmat.2013.09.050
  4. Anagnostopoulos, C.A., Papaliangas, T., Manolopoulou, S. and Dimopoulos, T. (2011) "Physical and mechanical properties of chemically grouted sand", Tunn. Undergr. Space Tech., 26(6), 718-724. https://doi.org/10.1016/j.tust.2011.05.006
  5. Axelsson, M. (2006), "Mechanical tests on a new non-cementitious grout, silica sol: A laboratory study of the material characteristics", Tunn. Undergr. Space Tech., 21(5), 554-560. https://doi.org/10.1016/j.tust.2005.09.002
  6. Axelsson, M., Gustafson, G. and Fransson, A. (2009), "Stop mechanism for cementitious grouts at different water-to-cement ratios", Tunn. Undergr. Space Tech., 24(4), 390-397. https://doi.org/10.1016/j.tust.2008.11.001
  7. Chang, M., Shau, S.H., Wu, T.F. and Hsu, R.E. (2004), "The effect of low-pressure grouting on liquefaction resistance of sands", Proceedings of the 15th Southeast Asia Geotechnical Society Conference, Bangkok, Thailand, November.
  8. Delfosse-Ribay, E., Djeran-Maigre, I., Cabrillac, R. and Gouvenot, D. (2004), "Shear modulus and damping ratio of grouted sand", Soil Dyn. Earthq. Eng, 24(6), 461-471. https://doi.org/10.1016/j.soildyn.2004.02.004
  9. Duncan, J.M. and Buchignani, A.L. (1976), An Engineering Manual for Settlement Studies, Department of Civil Engineering, UC Berkeley, CA, USA.
  10. Eriksson M., Friedrich, M. and Vorschulze, C. (2004), "Variations in the rheology and penetrability of cement-based grouts-An experimental study", Cement Concrete Res., 34(7), 1111-1119. https://doi.org/10.1016/j.cemconres.2003.11.023
  11. Fattah, M.Y., Al-Saidi, A.A. and Jaber, M.M. (2015), "Improvement of bearing capacity of footing on soft clay grouted with lime-silica fume mix", Geomech. Eng., Int. J., 8(1), 113-132. DOI: http://dx.doi.org/10.12989/gae.2015.8.1.000
  12. Geotechnical Engineering Office (GEO) (1996), GEOGUIDE II-Guide to Site Investigation, Hong Kong SAR Government.
  13. Hausmann, M.R. (1990), Engineering Principles of Ground Modification, McGraw-Hill, Co., USA.
  14. Head, K.H. (1994), Manual of Soil Laboratory Testing, (Volume I), Pentech Press, London, UK.
  15. Hsiao, D.H. (1996), "Study on engineering characteristics of sandy sol mixed with cement material", J. Tech., 11(3), 305-311.
  16. Ishihara, K. (1996), Soil Behavior in Earthquake Geotechnics, Oxford University Press, UK.
  17. Kikuchi, K., Igari, T., Mito, Y. and Utsuki, S. (1997), "In-situ experimental studies on improvement of rock masses by grouting treatment", Int. J. Rock Mech. Min. Sci., 3(3-4), Paper No. 138, 14 p.
  18. Krizek, R.J. and Helal, M. (1992), "Anisotropic behavior of cement-grouted sand", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 541-550.
  19. Krizek, R.J., Liao, H.J. and Borden, R.H. (1992), "Mechanical properties of microfine cement/sodium silicate grouted sand", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 688-699.
  20. Lee, K., Hong, C., Kim, H. and Ahn, J. (2008), "Development of the high and early-strength ultrafine cement grouting", Proceedings of World Tunnel Congrress 2008, Agra, India, September.
  21. Liao, H.J. and Liu, C.H. (1996), "Compaction grouting induced displacement and strength improvement for silty clay", J. Chinese Inst. Civil Hydraul. Eng., 8(2), 171-182.
  22. Liao, H.J., Borden, R.H. and Krizek, R.J. (1992), "Microfine cement/sodium silicate grout", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 676-687.
  23. Maalej, Y., Dormieux, L., Canou, J. and Dupla, J.C. (2007), "Strength of a granular medium reinforced by cement grouting", Mecanique, 335(2), 87-92. https://doi.org/10.1016/j.crme.2006.12.003
  24. Mitchell, J.K. (1976), "The properties of cement-stabilized soils", Proceedings of Residential Workshop Materials Methods for Low Cost Road, Rail and Reclamation Works, Leura, Australia, September.
  25. Mitchell, J.K. (1982), "Soil improvement-state of the art", Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, 4, Stockholm, Sweden, pp. 509-566.
  26. Mitchell, J.K. and Van Court, W.A. (1992), "The role of soil modification in environmental engineering applications", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 110-143.
  27. Mori, A., Tamura, M., Shibata, H. and Hayashi, H. (1992), "Some factors related to injected shape in grouting", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 313-324.
  28. Mutman, U. and Kavak, A. (2011), "Improvement of granular soils by low pressure grouting", Int. Phys. Sci., Academic Journals, 6(17), 4311-4322.
  29. Pantazopoulos, I.A. and Atmatzidis, D.K. (2012), "Dynamic properties of microfine cement grouted sands", Soil Dyn. Earthq. Eng., 42, 17-31. https://doi.org/10.1016/j.soildyn.2012.05.017
  30. Rosquoet, F., Alexis, A., Khelidj, A. and Phelipot, A. (2003), "Experimental study of cement grout: rheological behavior and sedimentation", Cement Concrete Res., 33(5), 713-722. https://doi.org/10.1016/S0008-8846(02)01036-0
  31. Schwarz, L.G. and Krizek, R.J. (1992), "Effects of mixing on rheological properties of microfine cement grout", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 512-525.
  32. Seed, H.B., Tokimatsu, K., Harder, L.F. and Chung, R.M. (1985), "Influence of SPT procedures in soil liquefaction resistance evaluation", J. Geot. Eng., 111(12), 1425-1445. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:12(1425)
  33. Soga, K., Au, S.K.A., Jafari, M.R. and Bolton, M.D. (2004), "Laboratory investigation of multiple grout injections into clay", Geotechnique, 54(2), 81-90. https://doi.org/10.1680/geot.2004.54.2.81
  34. Tseng, D.J., Tsai, B.R. and Chang, L.C. (2001), "A case study on ground treatment for a rock tunnel with high groundwater ingress in Taiwan", Tunn. Undergr. Space Tech., 16(3), 175-183. https://doi.org/10.1016/S0886-7798(01)00055-4
  35. Uchida, K., Ohmori, H., Takeda, T. and Shimoda, M. (1996), "Laboratory element tests on the effect of fracturing grouting on cyclic liquefaction resistance", Grouting & Deep Mixing, (Yonekura, Terashi and Shibazaki Eds.), Balkema, Rotterdam, The Netherlands, pp. 103-106.
  36. Vipulanandan, C. and Shenoy, S. (1992), "Properties of cement grouts and grouted sands with additives", Grouting, Soil Improvement and Geosynthetics, Geotechnical Special Publication No. 30, 500-511.
  37. Wong, R.C.K. and Alfaro, M.C. (2001), "Fracturing in low-permeability soils for remediation of contaminated ground", Can. Geot. J., 38(2), 316-327. https://doi.org/10.1139/t00-097
  38. Yang, Z. and Cheng, X. (2013), "A performance study of high-strength microbial mortar produced by low pressure grouting for the reinforcement of deteriorated masonry structures", Constr. Building Mat., 41, 505-515. https://doi.org/10.1016/j.conbuildmat.2012.12.055
  39. Yang, S.W., Chang, M., Yang, P.J., Chang, J., Chen, L.H. and Chiang, C.C. (2009), "Engineering characteristics of grouted sands by European and Japanese types of grouts", Proceedings of the 13th Conference of Current Researches Geotechnical Engneering, Ilan, Taiwan, August.
  40. Yasuhara, H., Neupane, D., Hayashi, K. and Okamura, M. (2012), "Experimental and predictions of physical properties of sand cemented by enzymatically-induced carbonate precipitation", Soils Found., 52(3), 539-549. https://doi.org/10.1016/j.sandf.2012.05.011
  41. Youd, T.L., Idriss, I.M., Andrus, R.D., Arango, I., Castro, G., Christian, J.T., Dobry, R., Finn, W.D.,L., Harder, Jr. L.F., Hynes, M.E., Ishihara, K., Koester, J.P., Liao, S.S.C., Farcuson, III W.F., Martin, G.R., Mitchell, J.K., Moriwaki, Y., Power, M.S., Robertson, P.K., Seed, R.B. and Stokoe, II K.H. (2001), "Liquefaction resistance of soils: summary report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of Soils", J. Geot. Geoenvion. Eng., 127(10), 817-833. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:10(817)

피인용 문헌

  1. Realization and engineering application of hydraulic support optimization in residual coal remining vol.32, pp.3, 2017, https://doi.org/10.3233/JIFS-162311
  2. Roof instability characteristics and pre-grouting of the roof caving zone in residual coal mining vol.14, pp.6, 2017, https://doi.org/10.1088/1742-2140/aa8eb6
  3. Strength and durability characteristics of biopolymer-treated desert sand vol.12, pp.5, 2017, https://doi.org/10.12989/gae.2017.12.5.785
  4. Application of magnesium to improve uniform distribution of precipitated minerals in 1-m column specimens vol.12, pp.5, 2017, https://doi.org/10.12989/gae.2017.12.5.803
  5. Pressure analysis in grouting and water pressure test to achieving optimal pressure vol.13, pp.4, 2016, https://doi.org/10.12989/gae.2017.13.4.685
  6. Modelling of Permeation Grouting considering Grout Self-Gravity Effect: Theoretical and Experimental Study vol.2019, pp.None, 2016, https://doi.org/10.1155/2019/7968240
  7. The observation of permeation grouting method as soil improvement technique with different grout flow models vol.17, pp.4, 2016, https://doi.org/10.12989/gae.2019.17.4.367
  8. Factors affecting the urease activity of native ureolytic bacteria isolated from coastal areas vol.17, pp.5, 2016, https://doi.org/10.12989/gae.2019.17.5.421
  9. Estimating UCS of cement-grouted sand using characteristics of sand and UCS of pure grout vol.19, pp.4, 2016, https://doi.org/10.12989/gae.2019.19.4.343
  10. Jet-grouting in ground improvement and rotary grouting pile installation: Theoretical analysis vol.21, pp.3, 2016, https://doi.org/10.12989/gae.2020.21.3.279
  11. Effect of Particle Size Distribution on the Grout Diffusion Pattern in Completely and Strongly Weathered Granite vol.50, pp.4, 2016, https://doi.org/10.1007/s40098-019-00386-2
  12. Rheological and workability effects of bottom ash usage as a mineral additive on the cement based permeation grouting method vol.263, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2020.120186